Alright, it's been a while, forgive me. I work in spurts of an hour or two every few nights. It's not quite finished, but it's at a point I'm comfortable showing. I'm also working with BM, so hopefully he can make some improvements on it before it's posted. This gun is the combination of two different goals I've had. First off, I always wanted to make a bolt action. I came up with the idea for the modern bolt action long ago but was beaten to the punch. So since then, as others have made their own bolt actions, I still struggled to make one up to my own standards. I wanted something sleek and compact with a removable magazine. Second, I went off on a little tangent while building, which then turned into its own project: a rotary magazine. While it's been done before, I don't know if it was ever successfully used in a gun. It's more about the novelty than the practicality, but what it does do is give you more storage in a compact design and act as a decent foregrip. I wanted to make it a decently usable. At first I thought of making just some cruddy gun to show off the concept as a usable magazine, but then I decided I may as well go the full nine yards and make it perform well. So this is what I ended up with. I don't have a real name for it yet, but I've considered calling it the Barackuda, a portmanteau of Barack (Obama) and barracuda because...well why not. I wanted to keep it as compact as possible, so I used a barrel similar to my Oodassault 3 series and a stock connection similar to my PDR. The stock is a bit long compared to the body of the gun, so it may look awkward, but I wanted to give at least enough room to aim the gun without sticking the pin into your eye. The blue connectors in the stock stop the bolt right after the trigger engages. The bolt is somewhat typical. I like how it sits flush with the back of the gun rather than looking like an extension on the back of it. The handle isn't amazing, just a variation of my tried and true handle I've come to like. The trigger also isn't amazing, and in hindsight, I want to block a bit further back still, but it works for the limited space I've got. The magazine on the other hand is magical. Go look at my last topic for details on its operation. This version is for yellow rods. I've added a rotary lock and band. When the middle rod is pushed toward the trigger (like in the pic), it's locked. It can securely contain 10 usable yellow rods while locked, though it can load up to 12, the top 2 can fall out. You insert it into the gun by pressing the top two red rods at an angle into gaps in the grey connectors at the front, then rotate the magazine, slightly pushing in, until you get the white rod in the gaps of the yellow connector. Finally, you push in the middle red rod by the trigger all the way forward to unlock the magazine. Edit (9/10/2015): Made my adjustments and now I'm mostly satisfied with the weapon. Here's the video.