SR-V2

I did it!!! i finaly figured out a way to fix the problem with the SR-V1. the problem was the ball joint that had to be pushed into the yellow connector. i made a new system. it is very reliable unlike the balljoint. and with the new system little changes had to be made. the only changes were for the better. now it uses no exotic parts. note that for lack of yellow connectors i could use, i moded the barrel. you can use the old barrel but this one works just as well. since i did not change much i call it the SR-V2 for now. i am working on a new name for it so i dont have to ask KILLERK if i can post it. sorry i dont have a pic right now i had to type fast. i will get one up tomorrow probely! insructions will be comming if KILLERK lets me.

Topic by dsman195276   |  last reply


my Sr-v2

A lot of you know my Sr-v1 it used only 89 yellow connectors well here is my Sr-v2 it has a different body from killerk's and a modded mech but it is is the same mech. unlike my other this uses 212 yellow connectors(not the most part friendly) and is so much more powerful I will post if any one wants but i need to ask killerk first. info it is one inch short of 5 feet uses 3 # 64 rbs Range: 200 feet(with bad fins) ammo: killerk's Sr-v2 bolt and now a bunch of random pic of it sorry about the bad pic

Topic by ninjusk   |  last reply


SR-v2 Mods

SR-v2. Minor mods to stock, handle, handle to stock to barrel connections, and slingshot. There are orange connector w/ Y-Piece connections from the handle to the stock, as well as from the stock to the barrel. I will post a picture detailing where if you like. Enjoy.1) Gun2) Slingshot mods.3) Stock mods.4) Connection/handle mods*.*See the small bit on the bottom to the right? It's a bunch of red connectors. Note how it's attached. You can use this to make the entire barrel. It's quite sturdy, just a but of weakness when it twists.

Topic by DELETED_Gilrostwo   |  last reply


Knex sr v2.

This is my version of the sr v2. it fires up to about 200ft, nothing really more (i used way better bands then the ones in the pictures). its accuracy is good up to about 50ft. i made it way stronger than the original one. credit goes to the_burrito_master for the bipod.

Topic by ~KGB~   |  last reply


SR- 47 gun

I am in the process of making a new gun. It may not be fantastic, but I know with yalls support it might be near it. It is the American version of the AK 47. It resembles the M4. I'll post some pictures, and right now, I'm working on the stock. I think that dutchwarlord's M4 stock is pretty cool. It doesn't matter if this is a working model or not. I really want to get this up and made. Thank you for reading this and I look forward to yalls suggestions. If anyone wants to help me build this gun, just PM me.

Topic by J Moneyman   |  last reply


A bullpup SR-v2 (just the desin of it )

To start I know the true definition of bullpup is mag behind the handle but i does not matter. I made it on MLcad as you can see, it will probably be my last sling shot i make so i want it to be the best i have made so If you have any thing that would improve it, tell me (sorry for using bold but people will see it) i will probly try and put a... safety a winch( to make loading easier) 2 bipod locations ammo storage and what ever else anyone can think of

Topic by ninjusk   |  last reply


Knex SR-Commando Review!

Here is a review on DJ-Radio's SR-Commando! Body strength: 7/10 It's okay. Front tip 9/10. Handle strength 9/10. Bi-pod strength: Sorry I don't know I didn't build it :( Trigger strength: 10/10 It's AMAZING! Stock strength 6/10 (Hold it just on the stock and it almost cracks off.) Sight: 6/10 Power: 7/10 It's pretty good! Range: 7/10 It's pretty good! Looks:10/10 In my opinion Please comment on how I did! (You just gotta love that pic!!!)

Topic by Vynash   |  last reply


SR commado v1 review

I got around to trying out one of dj raidos gunsso i tryed the SR commado v1What to expect:Strength:9/10very strong (but there are weak parts) but mostly strongRange:8/10 good sive and ok range i get 20 ft with easeLooks:9/10i think it looks very werid (but yet ausome) and also kinda looks like a future weponParts:7/10 like most of his guns are pretty low peiceHandle: 7/10 the real handle is kinda small (but i use it more as a grip)Stock:8/10 very sturdy and strong(rock solid)Barrel:8/10 a decent barrel but it can only take sow much powerFake barrel:9/10 very sturdy and good sizeadd onsBipod:7/10 not the best (but he made a low peice bipod )scope:6/10 you really can use the scopeIn the end:fatamizama morguiam!=(totaly ausomes)To finish it up: a very good gun and i would recomed it to every bodythank you for reading my frist review knex sbf(and also thanks to dj raido)(i would give you a link but my pc wont let me)

Topic by knexsuperbuilderfreak   |  last reply


Whats the best knex sniper rifle?

I asked the same question but like 10 months ago and i haven't been on that much since then and i was wondering if the sr-v2 is still the farthest shooting. So if it isn't i what is the farthest shooting knex sniper?

Question by ThomasRex   |  last reply


TJ-SR V1.2 Coming soon!

My Sniper rifle (a good one) is coming out, i hope to post pictures on 18th august, and i will be posting instructions!Pros:Long rangesemi auto 5 shotsA good stockAn accurate sightTrue triggerVery accurateCons:Uses a lot of piecesVery heavyThe mag Jams a bit

Topic by The Jamalam   |  last reply


SR Commando v1- NOW POSTED!

I have been hyping this gun up in the chatroom for a bit, so I got a pic today.This is A combo of my 2 best knex guns I ever built- The AR-4 Commando v2, and the Longbow v2. I made it mostly for the innovative ideas it brought, but i wanted to see if it was possible to combine the AR-4 v2 and Longbow v2.This gun uses an extremely reliable BRAND NEW sear system trigger which never misfires or jams, I thought of making a double-ratchet system and put it in a super modded Longbow handle. The stock Is an uber modded AR-4 commando stock. Same thing with the barrel.It is a single shot, but it can have a mag. Range is 40-50 feet (one rubbeband).the second pic is a close up of the mech.The only con I can think of atm is that this gun is sorta skeletony at the bottom. But its extremely sturdy neverthelessOk, I changed the name because I thought it would be less confusing and more appropriate.

Topic by DJ Radio   |  last reply


Can someone give me a parts list for the Sr-v2? Answered

There is a tiny ( like 5%) chance that i and many other knexers would be able to build the mighty Sr-v2. Can i have a parts list?

Question by NYPA   |  last reply


Fun with Djradio's SR-L crossbow (mods)

This crossbow is prob my favorite...Its very easily modified!! Check out my mods and post your mods YAY With just about any mod.... THIS HAS POWER!

Topic by Wafflicious   |  last reply


Longbow SR-L v2 -Now posted

I thought the old version (second pic) would be final, but I found out i had several parts, so I modded the top rail a little bit.This was going to be a sniper rifle ,the SPEC-9 v2, but I added a bow to decrease loading time and to make the design work. The major improvements over v1 are the stock, barrel, and it has a new sight now.I would call the longbow SR-l the SPEC-9 v2...This is possibly the biggest knex object I have made.PROS- true trigger- very powerful- good range (70-90 feet)- very accurate- has a sight- better stock- has a collapsible bipod- faster load time than v1 (5 seconds for v2, compared to ten seconds for v1)- NEVER jams or misfiresCONS- out of all my knex projects, this uses the most parts. (but im sure this isnt a problem for every other knexer out there)credits:stock- bartboyBipod- KillerKI do not have a final range because The only place where I can test my sniper bow is blocked by my christmas tree. final range- 70-90 feet.its a combo of my SPEC-9 sniper rifle and my longbow SR-l crossbow.It is coming out this Saturday at the earliest, but im not 100% sure.

Topic by DJ Radio   |  last reply


Knex Review: Longbow SR-L Crossbow

Creator: DJ RadioLink: https://www.instructables.com/id/Knex_Longbow_SR_L_crossbow_The_offical_sniper_remi/Area Overviews:Comfort: 9/10Range: 8/10 (50ft)Power: 9/10 (i can get it through 3 sheets of paper)Gun Strength: 6/10 (may break with too many bands)Gun Overview:Stock: 7/10Handle: 9/10Barrel: 8/10Trigger: 9/10Comments: a pretty cool crossbow. it fires well but may misfire sometimes. the bow does bend quite a lot so dont make unless you dont mind bending a few rods. the trigger is reliable and the handle s pretty comfy. the stock is comfortable but doesnt look the best.Verdict: the body could do with a kool looking frame and filled in stock etc. a new bow that doesnt bend could do no harm. but overall a pretty good crossbow!

Topic by statified   |  last reply


does any one have a smaller version of the sr v2? Answered

i want a smaller version of the srv2

Question by knexknex22   |  last reply


Best weapon to use in a Knex war? Answered

What is the best weapon to use in a Knex war?

Question by Hiyadudez   |  last reply


New trigger for the Knex M47 Shotgun

Anyone have an idea for a true trigger for the knex m47 shotgun without using a string. i still want to keep the pump and the magazine.

Topic by knexmaster#1   |  last reply


knex gun

Need help building sr-v1.

Topic by splodies   |  last reply


OMG

KNEX COASTER FREAK IS POSTING HIS SR-4!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Topic by T-man   |  last reply


the 6 foot, the longest range knex gun in history!

Here is a preview of the longest range gun in knex history, the 6 foot!!!!!!!!(the barrel is 6 feet long!!!!!!) Instructable coming soon , or shall I say novel sized building manual, just as soon as I get Mlcad working because of the size of this beast. KillerK and benfoxg eat my dust!!!!!! its still in construction, so subscribe, and stay tuned!  

Topic by Knex_Gun_Builder   |  last reply


SRV-3 The Concept Review with JBG's SRV-3

Hello fellow iblers’! I’m JonnyBGood and today I decided to post a review of the SRV3 concept. Be sure to note that this is not KILLERK’s official version but a close knock-off. I did not use the same bands or the exactly same mech. I also did not make side covers or the monopod so don’t judge his version based on my model. I also never shot it outdoors so ranges are a complete guess, but I will say KILLERK’s ranges are very believable since I witnessed them at Knex War 2013. So now with all that gibberish out of the way what exactly am I reviewing? Well I’m reviewing the concept, the ratchet mech, trigger mech, and any other part that contributes to the guns function and ergonomics. Okay so now let’s start with the ratchet… Ratchet- After the first use of the gun, I couldn’t imagine trying to load the gun without it. I did try loading it without using it and ended up spontaneous launching it in random directions, something you don’t want to happen with a gun this powerful. (Luckily the wall I hit was cement) The ratchet concept is really what makes the gun usable for people of any age, height or strength so I definitely think KILLERK did a great job designing this feature. Trigger- Well I willingly admit this part is the most different from KILLERK’s version, but it does rely on the same concept of the round being held in by a clamping force. I was actually the most concerned about how this would work because to me holding back a force that could send a yellow rod through a door with a clamp didn’t quite make sense to me.  I will saw after building it I now don’t doubt the clamps capability to hold the round, and now it also makes sense as to why he used a clamp. The clamp trigger mech allows for a very light trigger pull due to the pivot point being so close to the ammo, so the slightest pull moves the clamp up.  SRV-3 trigger is definitely one of those surprising concepts, being that the most powerful gun on instructible’s has one of the lightest trigger pulls I have ever used. Random other things- The ratchet and trigger were the two concepts which to me stood out the most for the SRV-3 concept but there are many other things about the gun which I will cover here. The Handle- So surprisingly enough it is actually pretty comfy, and it’s mainly built to hold the heaviest knex gun I have ever built. On the other hand, I wouldn’t try lifting this gun by just the handle, but why would you? You are definitely not going to akimbo these things unless maybe the handles were moved more toward the front of the gun, and then held like an RPG, but again why would you even want to akimbo or hold it with one hand? It’s a sniper rifle! The Dimensions and some other random things- Alright I bring dimensions up here because I think it’s one thing to see pictures and another to actually know how big this is. If you stand it on end it’s about six feet tall and it’s a yellow rod wide, so ten layers wide. (if you filled in the center which you would not do).  Again as I ranted about earlier this is what makes this gun so heavy but it’s required for the amount of power it’s capable of. You would also add another two layers if you wanted to make it more presentable so it could be 12 layers wide if you want it to be. Another thing that I noticed on my version was that the gun bows toward the end.  Granted I’m not sure as to why or if I was missing a support somewhere but it wasn’t a problem just something I noticed. The only other thing I was planning on reviewing the accuracy but if anything was relevant it is that I suck at shooting accurately! XD I can’t even shoot guns I build accurately so, a guy who is much better at creating coverfire, will not be giving an accuracy score. I will say the sights allowed me to shoot a 8 ½ by 11 sheet of paper from ten to twenty feet relatively easily, so they do help. In conclusion I would recommend you build the SRV-3 if you have the pieces for it. I would especially recommend it if you haven’t built one of KILLERK’S SR’s before because the power will blow you away. It is deffinitlly the king of the slingshot platform for now and probably until an SRV-4.   ( I apologize for the poor picture quality but it would not fit in my normal picture taking spot and there's still too much snow outside for outdoor pictures. Sorry!)

Topic by JonnyBGood   |  last reply


the_burrito_master's knex guns

Bullet bill knex gun: https://www.instructables.com/id/bullet-bill-knex-gun/knex x bow: https://www.instructables.com/id/knex--x-bow/knex samus arm gun: https://www.instructables.com/id/knex-samus-arm-gun/morretti SR-4 knex recon kit: https://www.instructables.com/id/morretti-SR-4-knex-sniper/knex assault kit -scar 11.01 knex -assault knife: https://www.instructables.com/id/scar-11.01/Park 52 knex sniper: https://www.instructables.com/id/Park-52-knex-sniper/

Topic by bradleyJOHN   |  last reply


new sniper

This in my new sniper it only uses like 110 yellows it uses a new firing system made by me and is more reliable than the sr-v1 range; have not tested power: it can pierce cardboard at like 40 or more feet

Topic by ninjusk   |  last reply


K'NEX Halo 3 Dual SMGs and Battle Rifle

Dual M7 Caseless SMGsI made another SMG and a Battle Rifle! The SMGs are almost exactly alike, except when I made the second one I noticed some problems and made a few small changes. Also, I didn't have enough of those swingy pieces I used for the forestock joint, so I used ball and joint pieces, which worked great.Here is the description from the page I made when I made the first one.This is a K'NEX model (just a model, not a gun) of the M7 Caseless Submachine Gun from Halo, better known as the SMG. It has twin notch sights, rear and fore stock, and a solid barrel. The stock is extended, the way I made it, but I'm thinking about making it collapsible. It should be fairly easy to put in a firing mechanism, but I don't plan on doing that right now. I don't think I'm gonna post instructions because I would have to take it apart. If anyone can dissect it in their minds, go ahead and make an Instructable, but make it a collaboration with me. M7 Caseless SMG on Halopedia.orgHigh-Res M7 Caseless SMGBR55HB SR - Battle Rifle, Heavy Barrel, Sniper RifleDifferences between BR55HB SR (Halo 3) and BR55 (Halo 2)- Longer barrel- Trigger guardI based my model off the BR55HB SR, which is the actual name for the Battle Rifle in Halo 3, so it includes all the changes. It has the elevated rail, which has a scope on it. You might notice at the end of the barrel in the picture of the actual gun, the barrel looks expanded at the end. I did this too. The inside of the model is almost completely hollow, so it would be easy to convert into a gun. The barrel at the end would be hard though. The whole thing is very solid, even though it's hollow. It's also very easy to make, unlike the SMG.BR55HB SR Battle Rifle on Halopedia.orgHigh-Res BR55HB SR Battle Rifle

Topic by Aeshir   |  last reply


new knex gun coming out acctualy it out now name: morretti SR-4

The gun that can shoot better than Gorkems sniper ,and looks much cooler. here is a linkpic 1 ,2 ,3 ,4,and 5 are all old now. 1st pic is the gun it will be ,sorry it's such a small pic they don't have any bigger ones. ) : 2nd pic is a close up of the scope kinda dark sorry. 3rd pic is it with the new butt/stock ,and for grip.4th pic is tit with a new barrel that still needs work ,and the for grip is a better color.5th pic I added a bi-pod it can fold up it's awesome its not fragile ether!6th pic it now shoots gray rods and can shoot through hardly damp shoe boxes from 15 ft away ,and normal card board at 3 ft. away. and it has a new bi-pod taking inspiration from (knex sniper rifle)s bi-pod it works great now I got my sister to shoot it and she hates knex guns.7th pic It has a newer stronger bi-pod ,and a clip flap. 11th pic just a speciall thing you can add to make it reely beastly it still shoots just as good like that wich is awesome. I now added a flap to close up the mag and changed the front sight. Breaking news I got it to shoot 50ft ,7in. without aiming up I think its the best gun ever.More breaking news I got it to shoot 64 ft. and 5 in. by aiming it up at a 40* angle ,but you won't want to do that it is allot more fun to shoot something 15-20 ft. away without aiming up.It also shot in to an apple and 2 layers of bubble rap not to big of a deal. The mag uses 4 decapitated gray connectors ,or 2 orange connectors because you get two if you use orange connectors. It can use two square plates the size of a yellow rod from corner to corner ,and 2 triangle ones the size of a yellow rod on the biggest side.

Topic by the_burrito_master   |  last reply


K'nex war log entry 2.

Here it is. 10/4/09 (continued) The SR-v2 men were ready to attack, but the KI army was still laying ammo like rain. I shot my sniper ( O.S.S.R ) at the army. I took out one guy. The leader of the group of IN ( KILLERK )shouted a FIRE and all 34 SR-v2 men pulled the trigger. It was amazing. The WHOLE frontline was severely damaged and the medics took them out. Our guys didn't have a big loss of people, just a couple of newcomers. Then a weird thing happened. The youtube guns came out. You can imagine how well they fared. The outside world laughed at our conflict. They don't even know how hard it was. Some guys took one in the eye and got blinded. To be continued...

Topic by NYPA   |  last reply


Farthest shooting knex gun?

I used to be on instructables a lot building knex guns but i don't have as much time as i used to. I ask this question about every year just wondering if any thing new has come up over the course of the year, and i like to buld at leat one or two guns a year now. I always like building guns that shoot great distances, as of now what is the farthest shooting knex gun with instructions on instrucables. Parts aren't a issue since i have well over 10,000 knexs, and i have made over 50 knex guns, including all of i_am_canadians cannons at least once including his heavy cannon three times, Killerk's sr-v1 four times, and the sr-v2 four times.

Question by ThomasRex   |  last reply


how do you make a popular knex gun? Answered

I have a knex crossbow wich dosent seem to be getting any attention so how can i make it famous like the SR-V1 ect.?

Question by Tom Buckey   |  last reply


It's coming............

Hi! I'm working on, and posting the biggest knex gun EVER. it's 15FT long!, It's based of KnexRule100's super sling, so he gets credit for the idea. It SHOULD shoot as far or farther then the SR-V2 (It's sling). It's not done yet so....... Yeah. <<>>  

Topic by Jesus.   |  last reply


new idea for a knex gun video game

I have an idea for a knex video game. basically, you have several missions at various locations and they get progressively harder. ideas for missions (easiest to hardest) -instructables HQ -golden gate bridge (the areas where mechanics go) -Beijing, china -monte carlo casino -Empire State Building -Sears tower weapons -the Dunkis TDS (default weapon at the start of level)-10 shots -Dsman's sidearm-10 shots -I_am_canadian's heavy cannon (non-movable turret)-3 shots -my Longbow SR-L crossbow-5 shots -SR-v1-5 shots -DD-27-5 shots -oodalump's machine gun-25 shots -Storm 223-15 shots -a grenade of some sort enemies have 3 hit points each except for elite commandos, who have 10. the bosses have a health meter and a shield that must be defeated first

Topic by DJ Radio   |  last reply


SNES controller idea

I thought that it would be a cool idea to stick http://www.amazon.com/MK808-Android-Rockchip-RK3066-Cortex-A9/dp/B009OX22B4/ref=sr_1_3?ie=UTF8&qid=1367876912&sr=8-3&keywords=smart+tv+stick into a SNES controller along with a teensy to automate the buttons. Would this work? I thought this would be cool to play snes9x for android on a TV.

Topic by qquuiinn 


The Knex More-for-less efficency series

Ok, i just posted my pistol, which wraps up my first knex gun series.It is featuring my guns which have decent range and features using less parts.........THEY ARE (in order that i like them):-The AR-4 Commando-Longbow SR-L-The SPEC-9 sniperand..................The Jackal.357enjoy building these very part-efficient guns!

Topic by DJ Radio   |  last reply


Knex Pricing

How much is Knex going for? I have a 33 lb. lot and was woundering how much you guys would pay for it.  I have lost all interest in Knexing, and am now into the real thing. I made the 6 foot and it sucked, but it did fire about 40 yards (you guys way over estimate range, there's no way you could get 200 yards out of a knex gun, I built the sr-v2 and it went 25 yards.)

Topic by Knex_Gun_Builder   |  last reply


K'NEX war log entry 1

I'm gonna be doing a knex war log every week till 2010 so here it is. 9/27/09 It's terrible. The world has gone to war. Every boy 10-20 has been called to war. The battle between KI and Instructables has gone too far. Forum topics have been flooded with hate comments and spam. They took it too far. Now everybody who builds knex guns has taken over the company and stole all the knex they could find. There isn't a knexer out there who has less than 100 guns. I myself have 134. We all have our own vehicles to hide our weapons and transport. 9/28/09 Here i was, at the front line. 2 sidearms, a rifle and sniper. I couldn't believe the difference of age and size of the army of KI. Then a FIRE was shouted and plastic rained out of the sky. I myself had a BR-18 and brutally emptied it on the enemy. I hit 12 guys and knocked them out. Now knex guns aren't harmful but we molded our knex and made them metal so they could pack a punch. And we added carefully made rubber bands specificly so powerful that you could break a bone. That was the objective. The war continued till we called in the SR-V2 men. They surrenderd as soon as never. They kept on the fire. Now, with a BR-18 that could break bones, a SR-V2 was especially feared. To be continued...

Topic by NYPA   |  last reply


DSMAN1'S SNIPER/SHOTGUN KNEX GUN

It is the best gun i have ever made! look at the vid to see more. made for max range and accuricy.(i had the idea for it long before the sr-v1 was made.) still in developement. i thought that it was ready to be posted in a forum. there is just a shadow in the vid because the gun may go under lots of moding and may never look like what is in the vid when i post it. this gun can also be changed to a shotgun in about 15 sec. the shot gun is a little less powerfull then the sniper verson but is for short range combat the the sniper can not do.

Topic by dsman195276   |  last reply


There is a Major Timeline Error in the Halo Wars Promo Poster

In the poster for the new game Halo Wars, try to find the mistake. I'll give you a hint: look at their guns. As many people know from reading the Halo series of books and the video games, that before the battle rifle is introduced, all but one Spartan are wiped out on Reach, or trapped inside of Onyx. You, as Master Chief, are introduced to the BR55HB SR Battle Rifle in Halo 2. The Spartans were all wiped out before Halo 1, well before the Battle Rifle is even conceived by its makers. What gives? Why would they make such a serious (to me) mistake on a widely distributed promotional product?

Topic by ILIKEPIE333   |  last reply


Names for K'nex guns

Hey, I've decided to name my weapons, like the heavy does in TF2. They are as follows (and they will NOT work without the Russian accent):Storm 220 V1 = SaschaStorm 221 V1 = GertieStorm 222 V1 = UrsulaStorm 223 V1 = BerthaStorm 220 V2 = NataschaStorm 221 V2 = RosmertaStorm 222 V2 = Nikita(postage after we've moved house) TJ-ASTR V1 = LucyJamassault pistol = HannahTJ-SR-V4 = BarberaStorm 22 Pistol = NathaliaI'll be referring to them by name from now on, so you better learn these!

Topic by The Jamalam   |  last reply


Auto Flush for Dual Flush Toilet

I'm looking to make a auto flush mechanism like this one: http://www.amazon.com/FlushMinder-Dual-Flush-single-flush-dual-flush-Accessory/dp/B00AP8UO9E/ref=sr_1_1?ie=UTF8&qid;=1431231167&sr;=8-1&keywords;=auto+flush. I haven't been able to find any kit like this for my dual flush WaterRidge toilet.  Anyone know how I would go about creating some kind of mechanism like this?   I have a cat that is toilet trained and I'm looking for a way to automatically flush my toilet.  Please let me know what you all think. WaterRidge Dual Flush Toilet: https://www.youtube.com/watch?v=idlX-ZT7r0w

Topic by nipn3ss   |  last reply


Deadliest K'nexer?

Well this was just a quick question I had. And yes, if you were wondering, I was watching Deadliest Warrior and it inspired me to ask this. If each K'nexer chose their best 3 weapons from their entire span of building, who would win a free for all war? For example, Killerk takes in his Pistol, TR, and SR. (I can already see you guys jumping to conclusions now...) Examining each gun, who would win overall in CQC, mid range, and long range field conditions? I'm not saying that they can only use one gun depending on range. They can use all three guns but they'd be playing 3 times, once on each different sized field.

Topic by TheDunkis   |  last reply


K'nex: why have they got it so wrong? Answered

Lego used to be great, but now all I see it "special bricks," you know, things like the plane sets! I mean, you may as well have one big brick in the shape of a plane. Anyway, I was on the K'nex site to buy some parts for the SRv2 after watching Lowney's video (was a bit sceptical of the 500ft claims at first but was sold after seeing the vid) and I wanted one of those big tubs. BUT SHOCK HORROR! These tubs no longer exsist: they are full of stupid "Knex Bricks" and "Knex People" and "Flexi rods" and "plates". Who needs them? All I need is a tub with basic bricks. And dont even get me started on the car sets. So why did they go down that route? It sucks.

Question by The One and Only   |  last reply


Christmas Knex Guns!!!

CHRISTMAS IS ALMOST HERE! Okay, so i wanted to make a list of all the knex guns coming out at christmas, so could you tell me them? I would like a list, (i think i already said that) soooo, give me a comment! List: STLR Seleziona's top loading rifle KFSA Knex freek's semi-auto TJASTR2 The jamalam's gun TBBR2 The burrito master's gun  PP19 Logic Boy's gun Silent assassin's secret replica Another Replica by Killer~Safecracker Dutchwarlord's bullpup t.a.r. 21 Raikou-san's new slingshot Mr.muggle's oodammo caliber sniper rifle The Dunkis' oodasault V3.6 (maybe)  Owen mon 82397's gun Ksc and knexfreeks repeating crossbow collab Knex mad's new turret breach loading gun Kinetic's pump action sling gun (maybe) Erikos kostariko's sr-v3 (maybe) Master dude's MAR 2  Which ones are you waiting for? I really want the KFSA, and the TBBR2!

Topic by Seleziona   |  last reply


Ok me first time here i need help

Ok so i just build the sr v2 or 1 or something like that! It has amazing range and accuracy, but i want to build a different gun. I don't know which one though. Can you guys give me a few suggestions. - i don't want to have to set up the elastic ever shot. - So i need a bolt action or semi or fully auto or something. -Also it need to hold multiple ammo not just one (preferably at least 5 shots before reloading) -ALSO IT MUST BE ABLE TO GO THROUGH A CARB BOARD BOX!! -And must not jam very often. - also i need it to have good range. - i have a ton of k'nex pieces and dont; care about the size or look what so ever! So what gun fits all my need!!!! please respond fast if you can! Thanks!!1

Topic by mike wait   |  last reply


Red dot scopes: I cant quite chose Answered

I am looking to buy a red dot scope, nothing too pricey, but nothing too crappy either. I am buying it off of amazon along with my vest, and i am stuck between 2. the first one is a barska on the following link:   http://www.amazon.com/Barska-Short-Tube-Gun-Sight/dp/B002QEXJH4/ref=sr_1_236?s=sporting-goods&ie;=UTF8&qid;=1286397649&sr;=1-236 the other one is also a barska, and is on this link:   http://www.amazon.com/BARSKA-Red-Dot-42mm-Riflescope/dp/B001JJCHY8/ref=pd_ybh_10?pf_rd_p=280800601&pf;_rd_s=center-2&pf;_rd_t=1501&pf;_rd_i=ybh&pf;_rd_m=ATVPDKIKX0DER&pf;_rd_r=0EQE4AP7X4QRM4CRR1SF If you could look at both and help me chose, or suggest another red dot scope between $30 - 40.  If you own either of them, please tell me what you think of it. If possible, i would like to know if either of them need a riser mount to clear the m4 front sights

Question by predatory meatball   |  last reply


NEW knex SPEC-9 sniper rifle- NOW RELEASED!!!!

IT IS POSTED! https://www.instructables.com/id/Radioactives_knex_SPEC_9_sniper_rifle/https://www.instructables.com/community/SR_v2_update/Here is a new gun that i will post (if you say u want it) AND keep. it is a big upgrade to the SPEC-9 pistol in range and decency. this will be posted both here and on knex innovationfull credit goes to oompa-loompa for the ammopartial credit goes to killerk for the bipodPROS-Better range than all my other guns combined (the house is not big enough to determine the range)-a slingshot-a great alternative to the SR-V1 for the piece-deprived-has modes for power or accuracy-uses a special barrel that has friction only where it's needed (this is achieved by putting the barrel upside-down except for the two parts closest to the trigger)-great range-to-parts ratio-new bipod can pivot around-rubberband does not fly off the gunCONS-terrible range compared to other slingshots (but the rubberband WAS stretched to the maximum)-bipod does not fold up-edit: now it does-the barrel has a weak point EDIT- PROBLEM SOLVEDshould i post?

Topic by DJ Radio   |  last reply


Guns To Check Out

Cool guns to check out: The Jamalam's battle rifle. Why should I? Do you want a k'nex gun that has an awesome hold, great distance, cool magazine, and working bolt? Well if you do, The Jamalam's assault rifle is perfect. Another one, is the SR-V1 by killer-k. This gun has intricate slingshot design, and very powerful range. This is definitely recommended in a k'nex battle along with all the others. I mean come on! It looks like a sniper (duh!), feels like a sniper and shoots like one too! Also, another one is Gorkem's sniper rifle. It is a awesome, sturdy, powerful choice. It is an awesome sniper. I love it, and it is filled with cool features like, a great stock, a ridiculously cool barrel, and an awesome loading system. A cool one is the fn-scar k'nex gun. It has good ratings, a cool gun, a nice system, and overall good and reliable. Last but not least everyone please watch my crome eagle rifle slideshow and say to post or not. Just type in: Crome Eagle k'nex gun slide show. I give credits to all of the guns I mentioned and am a big fan of them, well... bye!

Topic by knexarecool   |  last reply


Subscribe to me, then ill subscribe to you!

Simple, just subscribe to me, then ill subscribe to you! also, heres some of my work over the months! if you have any questions on any of them, feel free to ask! 1: bren lmg 2: grenade 3: pocket pistol 4: heavy cannon v5* 5: tape dispenser 6: ball machine 7: m1 garrand 8: vss vintorez and tiny oodammo pistol* 9: ball machine 10: nano gun* 11: halo 1 magnum 12: halo 1 assault rifle 13: ball machine 14: m16* 15: m4 s-system 16: zkar* 17: dual revolver pistol 18: ball machine 19: p90 20: zkar* 21: ball machine 22: mp5k* 23: tr18* 24: BAW* 25: ball machine 26: ball machine 27: p90 28: sr v2* 29: ball machine* 30: KGBMG 31: KLS v2* 32: ball machine 33: triple tape dispencer 34: tr8* 35: KGBSR 36: bullpup crossbow pistol 37: WASP* the ones with stars beside them are not my ideas, although i may of modded them...

Topic by ~KGB~   |  last reply


ideas for mounting a lightshade over my DJ / computer workspace from the desk?

I need a little more light to help my live video feeds to be clearer to the viewer. A small desk light is too focused on an area for what I want, and there is not the right floorstanding lamp for the purpose. so I have decided to go the custom route... I am not looking to add anything to the light circuit in the room, from the cieling rose, or the mains sockets, as tthese already have enough plugged in. I have got an led bulb - http://www.clasohlson.com/uk/Unidirectional-LED-Capsule-Bulb/Pr364131000 This works fine from the external molex connector on the external back face of my computers PSU. The shade I'm going to use is this: http://www.diy.com/nav/decor/lighting/indoor-lighting/light_shades/-specificproducttype-black___white_shades/-colourderived%3Eblack/Tezz-Metal-Pendant-Shade-9956483 the problem I have is I want it to be positioned above the desk where my equipment is. I cannot fix into eiter the wall or ceiling, due to them not supporting anything of any weight, therefore it must be fixed to the desk. I have my laptop and monitor on clamp-on arms - http://www.amazon.co.uk/Vertical-Monitor-Clamp-Cable-Mountain/dp/B001B7DT5E/ref=sr_1_2?ie=UTF8&qid;=1358138450&sr;=8-2 which it could be fixed to. I am also open to other ideas as well This is where I need some ideas and input on what I could use to get it in the right place. What could I use and how?

Topic by djrickdawson   |  last reply


Act Of Kindness

I am having a difficult time here in the Kottage. This is the most extreme and difficult thing to ever ask of my community, but here I am. Our family is, and has been, facing the worst devistation, alot like most people here in the U.S. (and I'm sure everywhere else in the world). I have been disabled and running my shop to help with financial obstacles for me and my family. My husband was laid off, and during his time of becoming unemployed, he has become very ill and unable to work any longer. His disability has been exhausted, and he is now awaiting S.S. benifits. He has been denied twice, and now the Sr. Attorneys have taken on his case. It will be a few more months until his decision comes in. I would like to ask anyone who can help, to please hear my plea. If you, or anyone you can refer, to please help by way of shopping for gifts, Christmas, or any other occassion you may have in the near future, to please think of me and my family. If you can, please post my shop links to your facebook, twitter, blogs, or any other social network you can post on. Any donations can be sent to paypal via kottage_kreations@yahoo.com My website is http://kottagekreations.etsy.com  I would like to take this opportunity to thank each and every one of you in advance for your prayers, support, and most of all your friendship. I have seen many tweets from my community in the past. Keep them comming! We really need your well wishes during this difficult and stressful time in our lives.

Topic by Kottage Kreations 


best K'Nex builder/gun contest!

Ok, this the best knex builder/gun contests.first contest is the best knex builder contest.Tech-king-----------------------4Kiteman-------------------------4Mepain--------------------------3DSman195276----------------3Perfect Duck-------------------3Oodalumps--------------------2Ironman69---------------------2here i will post the builders people voted for here, as if i premake a list then not every one gets a fair change.in this contest everyone gets two votes. you can only use one of the votes to vote for your self. you HAVE to vote two times or not at all.the second contest is the gun contest.this will be split into 2 categories:category 1: firing pin guns.DM-27--------------------7moretti------------------3OSNJCKMA2----------1K'nex Plasma Rifle--1red impact-------------1project Q---------------1category 2: crossbowsSR-V1----------------------------------4REAPER-------------------------------3Mepains huge knex crossbow--2my crossbow-------------------------1THE RULES ARE:1. YOU HAVE TO VOTE TWO TIMES OR NOT AT ALL IN EACH RANK2. ONLY TWO VOTES ARE ALLOWED3. YOU CAN ONLY VOTE FOR YOUR SELF ONCE IN EACH RANKING4. NO CHEATING IS TOLERATEDif you are unsure of what rank your gun should go into, ask me.the winner gets a 10 rating from me and the joy winning.BIG UPDATE:there is one more contest that is going to happen. it is the contest for the best gun that is posted now. all guns posted before 5/12/08 will not count in this contest. so get cracken on the next gun you are making! you have to make a readable/followable instructable because if you get into the top 5 then i need to be able to make the gun.the dead line for the instructable to be entered into the contest for best gun 6/5/08(subject to change)after that the voting will begin. the voting will end 6/15/08(subject to change)after that i will make the 5 top voted for and get stats for them(i will do this because i can put the exact rubberbands on each gun) and the judging will begin. the judges will be possibly be me, other people, and the winner of the best knex builder contest.i am thinking that judging maybe a better idea then just going by votes because then fake accounts maybe made to rig the voting.so far i think that the judges will be just about anyone that has built a decent gun and has consistently put in good feed back for other users. the ones i know for sure will be judges are :Mepain, Perfect Duck, Oodalumps, me(maybe, thats your decision not mine), the_bruitto_master, and the winner of the best builder contest.when i tie occur during the voting stage of the best gun/builder contest the most recently voted for will appear first, but it is still a tie.so:

Topic by dsman195276   |  last reply