Airsoft gun?

I need a new airsoft gun. Under 100 dollars. Please suggest.

Question by weaponmaster1   |  last reply


Airsoft Equipment? Answered

Hey guys, I have an upcoming air soft field game coming up and was wondering what other gear I should get and what i should use. As of right now I have: Echo1 Tactical M4 Red Dot/Flip Up/Carry Handle Sight Grenade Launcher/Bi pod/Fore grip Secondary Gas Blow-back M1911 Modded Spring shotgun Rpg Tactical Gear Camo Shirt Pants Mag pouch Holster Gloves Boots Tactical Backpack

Question by KnexFreak360   |  last reply


Airsofters Weekly!!

I have a new blog called Airsofters Weekly! Please visit and follow! This isn't spam, I just want you to get more info on airsoft. http://airsoftersweekly.blogspot.com/

Topic by imshanedulong 


Airsoft scope?

I am wondering if I got a good deal. I bought a 2.5x 32mm hunting scope for $5. Also what mounts do I need to attach it to a standard airsoft R.I.S. rail system?

Question by thing 2   |  last reply


Airsoft Miniguns?

Hey, does anyone know where I can get an Airsoft Minigun? I WANT ONE!!!

Topic by DrWeird117   |  last reply


Airsoft Bolt Action?

I was wondering on how to make a bolt action for an homemade airsoft gun. Im open to any suggestions

Question by JuriusV 


REAL airsoft gun?

Can an all-metal airsoft gun be moddedto fire real ammo?

Question by 5H4D03   |  last reply


Airsoft M14 update.

Some of you may already know that ive started to upgrade my airsoft M14. so far, ive bought a scope, a rail, a bipod, a sling, and 2 spare magazines. ive also bought some other airsoft equipment, and i just have a bit more to buy then i can start airsofting. ive spent roughly €500 on all of the equipment and im happy with what ive bought so far. for more pictures go to "My airsoft M14" instructable. im also working on bringing my account back to life, as in posting more things, such as airsoft instructables. tell me what you think!

Topic by ~KGB~   |  last reply


My airsoft gun.

This is my airsoft gun, its a SAS12. it fires at 240fps (1 joule, the max power limit for ireland) and packs a hell of a punch! its very accurate up to about 50-75ft. i painted the top of the barrel, for better looks, and the notches on the ironsights white, for easier aiming. its magazine capacity is 30 rounds. it also featues a safety switch just behind the trigger. it only cost me €50! (€35 for the gun, €10 for the pellets and €5 for the speed loader (holds 100 pellets)) its a brilliant airsoft gun!

Topic by ~KGB~   |  last reply


Tactical Airsoft Vest? Answered

I'm 13 years old and a little over 5 feet tall and I want a airsoft vest that will fit me well! I'm pretty skinny so I don't know what to look at. I wear certain adult small shirts "fitly." Can you help? 

Question by thing 2   |  last reply


crutches to airsoft guns? Answered

I recently tore my MCL and I am going to try to make my crutches into airsoft gun(s).  and I was thinking about using this design somehow.  https://www.instructables.com/id/Homemade-500-fps-CO2-Airsoft-Gun/  any suggestions? it would look cool to have a war where one second you're limping around and the next you're a living turret!! 

Question by pufferfish9108   |  last reply


BB's Vs airsoft

Witch is better BB guns or airsoft and I have to say I like CO2 BB guns better!

Topic by Metal4God   |  last reply


Are there cheap Airsoft sites? Answered

Are there any airsoft sites similar to those jewelry sites where $400 things are sold for $20-$30? Furthermore, I'd like to ask if hobbytronusa is a trusted site.  I've heard things about sites similar, but wasn't sure if it was that one. Thanks.

Question by bighead5454   |  last reply


AIRSOFT BANDOLIER - I WANT TO MAKE A BANDOLIER FOR MY AIRSOFT GRENADES. ANY IDEAS? Answered

I MAKE MY AIRSOFT GRENADES OUT OF EASTER EGGS. SO I NEED A BANDOLIER THATS POCKET IS BIG ENOUGH FOR A EASTER EGG.

Question by YERFDUDE   |  last reply



What are some good new DIY ideas for airsoft?

What are some good new DIY ideas for airsoft besides silencers, grenades, gillies, DIY guns, and claymores?

Question by Shadowhunter111   |  last reply


airsoft gun under $100?

Please help . I need a good airsoft aeg under 100 dollars . I like m4s thomsons galils and mp5s please also give a link or write a link to the website it is on .and also is the crosman nightprowler good.

Question by Golani warrior   |  last reply



airsoft-need help buying

So i got some money i wanna buy an airsoft gun just want to know is electric the type i should get or what maybe people could list some good guns

Topic by howboutitbru   |  last reply


What kind of airsoft gun this is? Answered

I know that it is a Cybergun S.A. Soft Air but I don't know which one. Please help! There are words on the side that say "The perfection have no the gun that lack".

Question by resophonicguitarist   |  last reply


Broken AEG Airsoft gun, how do i fix it? Answered

During a match, the gun slowed down like the battery was dieing but now it wont hold a charge, and the trigger may be jammed its an M16 but im not really shure on the brand

Question by fishcake27   |  last reply


Any ideas on how to make a redi-mag for my airsoft pistol?

Ok, so, my airsoft pistol sucks, but, I'm currently broke, so I'm sticking with it. I'm in a terrible place to try and get anything airsoft..Canada. Anyway, I can't buy much, especially another gun, because, like mot people into airsoft, I'm underage. OK, so, after that random info, I want to make a redi-mag system for my pistol,..and I need ideas for materials and whatnot. Ok, well, thanks guys!

Question by JamesTB13 


Game replica airsoft guns? Answered

For the last four/five months, I've been on the search for a site selling a large number of airsoft replica guns.  By that, I mean replicas from games, movies, etc. Specifically, Halo. I lack the time, resources, money, skill, and tools to build one myself, and can't seem to find any site no matter what search engine I use.  Any help would be very greatly appreciated!

Question by bighead5454   |  last reply



How to modify airsoft mask? Answered

Knowing that there are many fabricators on instructables, I was wondering if anyone had any ideas how I could modify an airsoft mask to look like the picture shown. I have one where the part beneath the lenses is detachable, and I really only need to modify the lower half, but would like to make a copy of that lower half and work on the copy rather than the original part. If anyone has any ideas at all, let me know. Especially with making the copy of the lower half.

Question by pyrorower   |  last reply


pumatic airsoft gun help ? Answered

Ok so heres my situation. About 6 months ago I made my own pneumatic airlift sniper but even though I could get about 80 lbs of pressure stored up before I pulled my trigger my sniper only shot as far as my 300 fps gun. My question is why cuz I had a lot more force in my pneumatic sniper then my other gun and it doesn't seem to matter. My sniper was made of a metal nipple about 9 inches long and 2 inches in diameter. I then put a cap on one end and a reducing coupler on the other. I drilled a hole in the cap and inserted a valve that allowed me to attach the chamber to a bike pump. On the end with the reducer I then added a ball valve that worked as my trigger. After the ball valve was another reducing coupler that brought the size down from an inch to 1/2 an inch. Into this coupler I screwed a break line about 50 cm long(sorry about the unit change I don't remeber its length in inches) and it fit the bb very nicely. I also added a little contraption I made from paper clips that allowed the gun to be tired downward without the bb falling out. However I don't believe this was the problem as I fired the gun when their was just a wire across the back of my breakline ,to keep the bb from falling into the gun ,and the distance seemed the same. I made sure every connection before the ball valve was sealed well except that the gun did leak at a rate of 20 lbs for minute because of a bad connection with the valve that connected with the bike pump. If you need more info just say so in the comments but I don't have the gun with me right now so all i have to go off of is my memory. Thanks for your help I really appreciate it. : )

Question by inconceivable1   |  last reply


i want to make a aisoft fort Answered

I want to make a airsoft fort but i am not very good at tools like nails and hammers (long story) can u help with this very hard to answer question?

Question by EpicZombie   |  last reply





What's wrong with my airsoft gun? Answered

It's a small gun and when u cock it back the BB either falls out the barrel or shoots literally 1 inch. If you need more pics let me know.

Question by MrSillyGuns   |  last reply


Can I find airsoft bb's in Australia (never played airsoft before)

I want to start playing airsoft, moving on from nerf modding. (also I'd like to make pen guns) Yet my friend could only find bb's when he went on a holiday around Europe. Are there any stores or online shops that sell these liitle plastic balls of awesomeness in the land down under?

Question by khaosfire   |  last reply


anyone own an airsoft winchester out there?

I know there are airsoft winchesters out there but does anyone actually own one here?

Question by Mattonater   |  last reply


What is the best airsoft gun you have ever seen?

From Aegs to Snipers and any thing else even grenade launchers! I want to make a big list of some of the best airsoft guns in the world! 

Topic by Aron313   |  last reply


What gram airsoft bb should I use?

I recently bought a UHC super 9 pro airsoft gun.  The problem is that .2 gram bbs curve dramatically (a very steep curve) up after about 75 feet or so.  The hopup is off, and if the hopup is on, the problem is worse. Will .25 gram bbs make much of a difference, or should I use .30 grams or higher?  Note: the fps with .2 gram bbs is about 410.  I am hoping the airsoft community at Instructables is willing to help me. Thanks.

Question by hunter1125   |  last reply


can anyone make me a airsoft battlerifle from Halo 3?

If u can show me how or snd it 2 me. ill pay u $

Question by    |  last reply


How do I know how fast of a spring my airsoft A.E.G can handle? Answered

I have a JG MP5K A.E.G that I want to upgrade. It has a high torque motor and it has an 8.4 volt 1600 mah battery. I am looking for an M110- M120 spring. And if I upgrade the spring will there be any other parts that I have to upgrade? I dont know what spring it has right now. I am pretty sure it has a version 3 gearbox but it might be version 2.

Question by airsofter1   |  last reply



help!

Hey I want to get into airsoft, but I'm 16 ands I'm quite certain my dad will think I'm a sissy. any ideas?

Topic by James (pseudo-geek)   |  last reply


CO2 canister discharge for arm mounted gun? Answered

I'm looking to modify a simple airsoft gun for the purposes of making the needed weapon props for a assassins creed costume a friend of mine is working on. With that said, the arm cannon/crossbow thing (sorry, I sadly never played the game!) is one I'm playing with now, and I got to thinking about taking a simple CO2 powered airsoft gun, and modding the barrel to take softer projectiles, and to be mounted to someones wrist. The question being: would the discharge from a CO2 cartridge harm someones hand? There will be leather between gun and wrist, by the way.

Question by DoctorWoo   |  last reply


Can an Airsoft m3000 shotgun pierce a clay skeet? Answered

I have an airsoft m3000 shotgun 355 fps and I'm wondering if it will be able to pierce through a clay skeet? Anybody Know

Question by Airsoft 007 Sniper    |  last reply



Does anyone know how to make a reloading system for air guns?

I want to make something similar to a bolt action so it would be easier to reload my gun. 

Question by JuriusV   |  last reply


What is the BEST knex airsoft gun?

I am wondering, are there any knex airsoft guns that shoot about 300 fps? I do not care how it works, just want one that would work as a backup in an airsoft war.

Question by Bartboy   |  last reply


Has any1 ever heard of, know how to make them, or where to buy smoke bombs that u snap like glow sticks and they smoke?

A friend i meet on a recent cruise told me that his friend buys then or makes for use in air soft wars but that guy keeps it a secret. any feedback would bee nice they would be nice to have and hopefully cheap and easy to make or buy. anything would be nice!!!!!!!!!! THX!!!!!!!!!!!!!!!!

Question by zipzapper859 



CHECK OUT MY AIRSOFT TEAMS NEW PAGE

Everybody has to check out my new airsoft team's website. We are now officialy FPS: 500. The website is www.freewebs.com/fps500. check it out if you get a chance. Some pictures of the team will be added later.Visit My Website

Topic by AirsoftMaster1213   |  last reply


how do i zero in an airsoft sniper scope/? Answered

Just got a new airsoft sniper, and need help figuering out how to zero scope

Question by brickman93   |  last reply


Where can i buy good airsoft guns in Vancover, Canada?

I want to buy good airsoft guns (not from walmart) but i live in canada. Where do i buy them? Is there an airsoft store in British Columbia?

Question by ninjaduck22   |  last reply


Remote Control Airsoft Gun Mod

Lol - check out this video! - http://www.metacafe.com/watch/887029/remote_control_airsoft_gun_mod

Topic by Joe426   |  last reply