How do you install a Tippmann A5 double trigger?

I want to get a Tippmann A5 double trigger but dont know how to install it.  Im sure they give you instuctions but i really dont like instructions.  basically i find a hard time reading there directions as is. 

Question by generalwaffleking   |  last reply


Knex double shot prototype

Here we have a slightly angled pin knex gun. The pin is slightly angled down, making the pin come in the magazine well angled, hitting two bullets instead of one. It uses an internal flexy bullet pusher instead of the external ones. It shoots two bullets 30 feet using two bands. It has a yellow rod magazine that isn't removable. It also uses a unique trigger system. Its comfortable, light weight and is very fun to use. No sights, its just a prototype.

Topic by DELETED_Blue Mullet 2   |  last reply


Double barrel break action shotgun in 1-3 days

I have been building on this thing for the past 3 days, 1 to 3 hours a day. It's a massive, yellow rod thick, double barrel, super strurdy, pin guided (!) break action shotgun. I will give credit to Seleziona, because I took his Ghost 3.0 stock and trigger + handle mech and modded it slightly to fit my gun. (Don't worry I asked him in a PM) Don't get me wrong, but I just didn't felt like making a stock and trigger (mech) myself because I tried but failed 3 times because I'm not very good at making stocks and triggers out of nothing. Maybe a lack of experience, you guys tell me. More details and (a) pic(s) will come tomorrow. Now, on the other hand: I was scrolling trough the forum this evening, and I saw Kinetic's topic about innovation. and I'm 'afraid' that this shotgun will not be 'mind-blowing' to you professional builders and innovators like Dunkis, Kinetic, DJ, etc. I expect that you pro's will think: Bah, meh, just another generic gun, not innovative. And honestly, I don't want the pro's to think that. I hope that you professionals and innovation-addicts realize that some not-professionals are doing their best at innovation, but sometimes can't help that their design is too generic. So I hope this will not be too generic and 'not-innovative' and you pro's like it so we can keep the community alive and maintain all the other things that were discussed in the forum topic the last few weeks/months. I always try to be as innovative as possible, but if I want to post something that I made and if I'm proud of it, even when it's not innovative, is it ok if I post it? In my opinion, I have the right to post it. The point is: I did my best, I'm always doing my best at innovation and building and I hope you guys will like it. (Don't mind my spelling and grammar please, English is not my home-language) Regards, H.

Topic by H1T4TCH1 


block trigger knex gun list

Well we cant get in to mepains list so i posted it here.https://www.instructables.com/id/Pocket-sized-Knex-gun/https://www.instructables.com/id/knex-gun_17/https://www.instructables.com/id/Super-Small-Knex-Pistol/https://www.instructables.com/id/Knex-semi-auto-pistol/https://www.instructables.com/id/-knex-small-gun/https://www.instructables.com/id/Knex-mini-pocket-gun/https://www.instructables.com/id/Knex-Pistol_7/https://www.instructables.com/id/knex-nail-shooting-gun78.5-mph/https://www.instructables.com/id/Pretty-simple-knex-pistol/https://www.instructables.com/id/The-Last-Resort-knex-gun/https://www.instructables.com/id/Knex-Gun-%3aThe-ACE-227a/https://www.instructables.com/id/KNEX-GUN-%3aTHE-ACE-226a/https://www.instructables.com/id/A-DOZEN-GUN-knex/https://www.instructables.com/id/very-strong-hand-gun/https://www.instructables.com/id/knex-gun_12/https://www.instructables.com/id/Strong-and-accurate-knex-gun/https://www.instructables.com/id/VERY-SIMPLE-KNEX-GUN!/https://www.instructables.com/id/cricket/https://www.instructables.com/id/small-standered-knex-pistol/https://www.instructables.com/id/micro-knex-gun_1/https://www.instructables.com/id/K_nex-Dual-Pistol-set/https://www.instructables.com/id/Ulitimate-mp5-with-fold-in-stock-great-power-and-c/https://www.instructables.com/id/Tiny-K_nex-Gun/https://www.instructables.com/id/knex-gun%3a-the-big-torture/https://www.instructables.com/id/Knex-gun-mod-of-tiny-torture/https://www.instructables.com/id/small-knex-gun-and-easy-to-build/https://www.instructables.com/id/spring-powered-knex-gun/https://www.instructables.com/id/knex-awsome-gun!!!/https://www.instructables.com/id/Berry-blaster-gun/https://www.instructables.com/id/Flie-Ing-GOOse-single-shot-KNEX-rifle%2c-high-power-https://www.instructables.com/id/small-yet-strong-gun/https://www.instructables.com/id/Knex-Semi-auto-with-*NEW*-magazine-system/https://www.instructables.com/id/Really-easy-knex-gun/https://www.instructables.com/id/Tiny-Gun/https://www.instructables.com/id/Mega-Pudge-K_nex-Assault-Rifle/https://www.instructables.com/id/Basic-Semi-Automatic-knex-pistol/https://www.instructables.com/id/K_nex-Spining-Projectile-Hand-Gun/https://www.instructables.com/id/begginers-simple-knex-gun/https://www.instructables.com/id/knex-gun_7/https://www.instructables.com/id/Knex-single-shot-riflesnyper/https://www.instructables.com/id/38-Piece-Gun/https://www.instructables.com/id/Bolt-action-knex-gun/https://www.instructables.com/id/powerful-knex-gun/https://www.instructables.com/id/knex-semi-automatic-pistol/https://www.instructables.com/id/small-simple-knex-pistol/https://www.instructables.com/id/knex-sawed-off-shotgun-%2f-assault-rifle/https://www.instructables.com/id/KOOL-DUEL-BARRELED-K_NEX-UZI/https://www.instructables.com/id/mini--sniper-with-scope/https://www.instructables.com/id/Simple-pump-action-knex-gun/https://www.instructables.com/id/mini-knex-pistol/https://www.instructables.com/id/very-powerful-knex-hand-gun./https://www.instructables.com/id/very-small-knex-gun/https://www.instructables.com/id/Double-Barrel-Knex-Pistol/https://www.instructables.com/id/7-Shot-Knex-Pistol/https://www.instructables.com/id/my-knex-pistol/https://www.instructables.com/id/Pico-power-K_nex-gun_1/https://www.instructables.com/id/Yet-another-k_nex-gun-this-ones-for-the-contest/https://www.instructables.com/id/KNEX-POCKET-GUN/https://www.instructables.com/id/Small-easy-k_nex-gun/https://www.instructables.com/id/basic-pistol/https://www.instructables.com/id/K_NEX-GUN/https://www.instructables.com/id/Basic-Knex-Cannon/

Topic by dsman195276   |  last reply


New Low-piece Crossbow

I was building crossbows all over the place this weekend, at one moment I had one that was twice as large as the Reaper, but I lacked pieces to make it sturdy. This started out as a low amount of pieces Reaper, but I eventually made it a small crossbow which has about 80-95% of the Reapers power. Although it has the power and probably also the distance, it doesn't have a double arrow trigger(only one arrow) and I don't think it is able to fire properly without trigger. It is however, compared to the Reaper very practical, light and easy to fire/load. Btw there are 4x3 rubberbands on it in pictures. I don't know if I am going to post this one though, maybe if its really needed :P

Topic by Wicky   |  last reply


I am making a bolt action knex gun as my first I'ble. Could anyone give a first timer some tips on knex gun building?

I am having trouble with the main body, barrel, and trigger mech. This is my first instructable,could some one help me, I am giving credit to the Jamalam due to me using a stock shape I think I saw on one of his guns, although it is a double layer gun. I need serious help on this!!! ^ II _ Rune blader

Question by Runeblader97   |  last reply


Which knex sidearm should i build? Answered

I don't generally use primary weapens, besides shotguns, but which sidearms are the best of the best of the best of the best of the best? It can range at any pieces, just as long as it shoots pretty far without having to put 5+ bands(my ahnds get sore when i pull them, i mean like with my bands a normal knex gun shoots 1.5x or double the range. I'm looking for sidearms withing this category-realistic(optional),no block trigger(any beside that),mag-fed (preferaably through the handle but doesn't really metter), no jams(yes no jams). I'm oing to make my own but until then i just need a good one....My current one is the TDSS(TheDunkis Slide-action Sidearm) because it fits above categories.

Question by knex_mepalm   |  last reply


SR Commando v1- NOW POSTED!

I have been hyping this gun up in the chatroom for a bit, so I got a pic today.This is A combo of my 2 best knex guns I ever built- The AR-4 Commando v2, and the Longbow v2. I made it mostly for the innovative ideas it brought, but i wanted to see if it was possible to combine the AR-4 v2 and Longbow v2.This gun uses an extremely reliable BRAND NEW sear system trigger which never misfires or jams, I thought of making a double-ratchet system and put it in a super modded Longbow handle. The stock Is an uber modded AR-4 commando stock. Same thing with the barrel.It is a single shot, but it can have a mag. Range is 40-50 feet (one rubbeband).the second pic is a close up of the mech.The only con I can think of atm is that this gun is sorta skeletony at the bottom. But its extremely sturdy neverthelessOk, I changed the name because I thought it would be less confusing and more appropriate.

Topic by DJ Radio   |  last reply


AR-4 Commando v3-NOW POSTED

Posted!Do you think this gun makes the AR-4 v2 look like a noob's toy? plz answer!This is a new bolt-action knex assault rifle I made. It shoots Yellow rods. This gun is the first bolt action to my knowledge that doesnt use modded part.For those of you who dont think it is true bolt action, to shoot the gun, you have to pull the ram/bolt back, then push the bolt back while leaving the ram pulled back.STATS-Bolt-action-True trigger-includes bipod (foldable)-tight looks-includes scope-6 round hopper-30-40 foot range (one rubberband doubled up)-Safety (new)EDIT- I have put tape on the part of the bolt that pulls the firing pin back, and it gets an increased range. the tape straightens the parts that hold the bolt, decreasing friction.This started out as one of my failed projects, I made it before the jackal and showed it to ajleece and some others. The original one had a bottom loading removable mag, shot blue rods 5 feet. I took it apart to make my jackal, and then I got the idea to make it a true bolt action.I was not trying to compete with the ZKAR, I was just trying to make my AR-4 v3 work.Here is a video of me firing it on youtube:

Topic by DJ Radio   |  last reply


TheDunkis's Display and Request Thread

Alright I'm not saying I'm special enough that I should have my own little personal thread dedicated to what I do but...I'm lazy enough that I should have my own little personal thread dedicated to what I do. Why? Simply that. I'm lazy. I don't feel like making a thread/slide show for any new gun I make but I don't want to post it in some other random place. I also don't want to go around asking for ideas whenever I'm stuck. So to put it simple I'm going to display whatever current projects I have here and I'll also take requests. ~Current Project~ FKG (Folding K'nex Gun- Yes very original...) Alright I saw SK's FMG and I wanted to try one out myself. It didn't end up as pretty or as functional as SK's but it is compact and in a very early stage of design. I'm not sure what to do with it because it's at the point where I'll have to completely butcher it to improve it and then that would require whole new ideas on getting the parts that do work to keep working. So as said the only real big difference here is that it's more compact than SK's. Some other differences are -Held in place by a "grip" rather than a "bolt" -At the moment not rubber band loaded -Simpler trigger -Double hinge thingy for the stock to gun connection. So instead of a fixed pivot swing, two different areas rotate to move the stock from the very bottom to just behind the gun. Otherwise it was to fire dark greys with greens as well with a hopper but right now it doesn't work so well. I think the barrel has some friction in it from the way I set it up. I could loosen it up but I'm just going to redesign the gun anways. Should I continue? Or shall I try making a bolt action gun similar to Zak's (but different enough)? Or I'll try something completely new.

Topic by TheDunkis   |  last reply


Serious Notice guys n gals concerning me.......

Hey, just wanted to let you all know (so, maybe I put this in the wrong forum) that I am up this early in the morning ( 6:30 am ) because I have to go to the hospital for a complete cardiac / pulmonary workup and battery of tests. Yeah, getting older stinks, especially if you let you physically self atrophy. Anyway, just wanted you all to know, in case you don't see me for a few days or longer (the tests only last about 4 hours or so, but they could potentially bring on cardiac arrest, or trigger a severe asthma attack, depending on the kind of shape I am in ( it is kind of a pregnant pear shape actually ). See you all when I am back from the hospital....Addendum: I have a lowered amount of blood flow to my heart. What this means is that I am a borderline heart attack candidate if it gets any worse. Cholesterol was a little high, triglycerides way high. I will find out details on Friday I suppose when we discuss options...Addendum 2: The pulmonary tests ( 05/21/2008 ) were horrible, but there doesn't seem to be anything overly wrong that is obvious to the tech, with my lungs.....will have to wait for the doc's report thoughAddendum 3: Well, I am afraid things have progressed to the next step... I have to have a heart cauterization to see what may be blocking the lower artery, and how bad the blockage is. If not too bad, they will simply do a quick angioplasty and open it up, but if bad, I will then be scheduled for a bypass. *sigh* as we age the fun just never ends, eh ? Addendum 4: It will not be THIS coming week, but most likely next week, they will do the double bypass. Because of the location of the blockage at a major branch which would end up cutting off flow to the other artery, they have decided I best have the bypass done. PS: there was hardly ANY pain in the cath procedure.....I am going to give the person that told me that a hard time next time I see them :-) But I have experienced broken bones already, so I know the next step is not going go be a picnic. Addendum 5:I may be able to get the bypass done as early as Monday the 9th Yay ! Addendum 6:I am now into my second week of recovery, and things are progressing so well, my wife is afraid I will want to go back to work early and she will be alone again.

Topic by Goodhart   |  last reply


Oodassault 3.7

Yeah, I've done this too much. 3 different models, 7 revisions for this model alone, 2 already posted. The 3.6 was satisfactory but I noticed there were still some problems for some people and it required some tweaking to make sure it worked right even though it was pretty reliable when it was set up right. This one is a lot more user friendly. I changed up some things so it's guaranteed to work without all the tweaking. It was just a few minor mods really. You won't probably catch any changes from the image alone at first so I'm obviously going to list them. -The simplest but probably most effective is adding another light grey in the middle above the magazine. At first I had a gap there to make stripper clip loading easier. However, it made the ammo shoot up a little higher and sometimes would cause it to spin out faster. I also suspect this may have been the reason a second round would be dragged out if the magazine wasn't set up right. -There's a green rod and spacer wedged in between the bottom of the magazine where the tilt bands are placed so that it doesn't squish the mag pusher. This allows for a weaker rubber band on the pusher so there's less chance of it exploding. -I changed how the the magazine rests against the rest of the gun by using mini knex adapters. I'm not sure if this is required as far as reliability goes but I suspect that it may have been why some people's guide rods were shot off. The magazine tilted in ever so slightly but just enough for the ammo to catch the rod. The mini K'nex also have a larger gap so it's a little easier to slide ammo in. Not too much of a difference but hey, whatever works. -The one you guys probably will like best. I changed the tilter just a little. It requires a rubber band to stay up but I didn't think it was a big deal. It allows the magazine to tilt out farther and the red connector can grip around an orange connector on the trigger guard in such a way that it takes some of the stress off your finger. This means you can use more tension on the magazine to make sure it stays shut without wearing out your finger. -Finally, I knew this for a bit but decided I'd finally show you that you can use green rods instead of white rods on the top middle three holes (the bottom pairs and the front and back pairs would be required to keep the gun sturdy). You can use green rods then instead of black Ys to block the green rods in the holes. I used this method for a simple rail like thingy and added a custom sight. It's more for looks than function but it actually works quite well. So yeah that's it. Between all the mods, it's guaranteed to work perfectly now as far as I know. Nothing has gone wrong since building the gun with everything changed. No magazine explosions, double shots, or anything that would otherwise be undesirable. Also, it's a little more accurate and gets a bit more range I'm guessing thanks to slightly more stable ammo. I'm not trying to make this sound super hyped. You should just know that I come from a long line of descendants whose ancestors built the Great Wall of China.

Topic by TheDunkis   |  last reply