E-Book Problems

OK...SO i just got a PRO membership, and i am trying to download some E-Books but it just keeps sending me to an overview page that shows the different formats i can get the E-Book...why cant i dowload them? PLEASE HELP!!!?

Question by sokamiwohali   |  last reply


Boing-E-Boing

Boing-E-Boing is a cool trick for the yo-yo. It is fairly simple, but still looks very amazing. First, go into a split bottom mount. To do this, throw a sleeper and go into a brain twister mount, but instead of bringing you throw hand under the yo-yo, swing the yo-yo over your index finger of your throw hand and it lands on the string. That is a split bottom mount. After the split bottom mount is in place, pass the yo-yo forward once by switching your arms. Now the yo-yo is in the middle of two strings. Move your index finger at the top up and down. Watch as the yo-yo bounces between the two strings because it has nowhere else to go!

Topic by PineapplebobTheGreat   |  last reply


E- walker idea ?

Hey All- I’m the new gal on the block - not round it , so I thought I'd skip proceedings and get to the main point why im here ( aside from the fact I like to learn more , meet people and of course take over the world ) The problem then , and it is big problem , is that I have disability and so Im looking at way I can get around better than I have been . One of these ideas of late has involved basically using something called a knee walker , which you can see here[url]http://www.phc-online.com/Knee_Walker_p/neebop-785.htm[/url] , and trying to adapt it so I have electrical asssitance / power for rought terrain , typical paths here and steeper hills. To add to this problem is the fact I know nill , not even the basics really ,of how I should go about this , other than other examples of what people have done and seem feasible . I don’t have have soldering kits, milling machines or any of that stuff for cutting adapting frames , and TBH would rather try to avoid if i can , simply because I dont want my knee walker too look much like a DIY job / unprofessional and therefore not the credible disability device it currently is. Speed is not issue , I guess 4mph is fine , though it would be nice to go a bit faster for more difficult ground I.e. even off road . The tires I think I can replace with moutainboard given their the same size , ( provided wheelbase checks out ) and the battery has to be ideally be lithium I.e. as opposed to lead. I don’t really mind whether its 2 or 4 wheel drive but figured ( because the axle is all sealed off on both sides ) a hub motor might be the only way of achieving this idea. Any way, that’s just about it , I still need to take the wheels off to confirm the wheel base but other than that , I cant think of much more to say. If any one has any suggestions then on how a complete beginner could make this idea a reality I’d really appreciate . Thanks a lot helena

Topic by hele   |  last reply


How can I make a sustainer for an acoustic guitar (working on the principle of an e-Bow)?

I mentioned acoustic sustainer because I have been told it is easier to build than an electric sustainer. I have been told that piezos can be substituted for a normal mag p/up, then use a monophonic coil driver and the amp/preamp and AGC (Automatic Gain Control) to even string response. But I have had difficulties with the PG Sustainer thread instructions, particularly for acoustic guitar. There are various amplifier and preamplifier circuits available, but I am a complete novice to electronics. I have a more knowledgeable friend who is able to work from circuit diagrams, but I need to be very clear about what I want him to do, and need also to be able to access the components. Thanks in advance for your help.

Question by truthseeker57   |  last reply


E-mail from Instructables

Everytime someone responds to one of my posts in the forums I get an e-mail, how do I disable this. So far I haven't found a button to disable it and I keep getting a bunch of emails. Help

Topic by acer73   |  last reply


G.R.O.U.P

This is just a group that can talk about L E D light or nerf mods but not cooking or baking. man start or own group only technology, play, outside, workshop and soler.?

Question by vee-man.mol   |  last reply


Favorite Gun in Halo CE

  Please tell me your favorite gun in halo CE and favorite gun combos in UNMODDED online games.

Topic by lil larry   |  last reply


S.T.A.L.K.E.R artifacts models?

Hi, I'm looking for someone making artifacts from S.T.A.L.K.E.R games. I'm going to make some models of them, so I'm just looking for someone, who tried to make some? Does anybody have any perception? For example, which materials are good, which are not. I'm want it for larp action next year. I tried plastic (polystyrene), but it's so fragile. I wanna try melt PET plastic from bottles. Glass is absolutely unuseable. Some tips for transparent, solid material, which is easy to obtain and work with it? If someone tried to make some models of artifacts, send photo :) Thanks

Question by FireCrier 


The smallest knex gun with a removabe clip

Alright, I was messing about with my knex, attempting to make a knex gun with a removable mgazine. I had made the clip and I then noticed my knex book-end that I made ages ago. I noticed that my knex gun clip would fit inside it, so with a little modding I think I have come up with the worlds smallest knex gun with a removable clip. It's roughly 12x8x3.5 with the clip in, and 12x6x3.5 without. Please post any atempts to beat this or correct me if I'm wrong becuase I have not researched this so it might not be the smallest. Tomm0505

Topic by DELETED_tomm0505 


Can you solve this Riddle?

I have presented this riddle to over a million people and no one has been able to solve it. I posted it in Offbeat and Free Stuff to win a free E-Book so, can you solve this riddle? Riddle me this, riddle me that, the answer is there beneath your hat. When asking a heads or tails type question, when do the answers number greater than seven? Good luck Joe

Question by Josehf Murchison   |  last reply


Does any one know how to play "Organ Donor" on the piano by DJ Shadow?

i cant seem to find any sheet music for the song, but would love to play it! D:? i've got the main theme so far c# g# f# g# e# f# d# e# c# c# g# g# f# f# g# g# e# e# f# f# d# d# e# e#

Question by HaTOkaD 


Free games?(Non free if really good)Rated E-T no blood Answered

Ya see I just got a laptop and I want to load it with games for when I wanna chill out and maybe for online multiplayer. Sugestions?????? ***!!!Mostly fps games!!!***

Question by builderkidj   |  last reply


Chords

What chords do you know? G, EM, E, F,C

Topic by TSC   |  last reply


Future posts?

Is it just ,e or (at this time) did tech king post comments over -300 minutes ago?

Topic by guyfrom7up   |  last reply




K'NEX MK5 Smart Pistol

There is no secondary choice when you have a good secondary. I thought I'd just drop by and give you guys a pic of my new Titanfall MK5 Smart Pistol. Essentially what I did was take my bros new FN Five-SeveN and made it into a heavily modded, futuristic, auto-aiming weapon. I'll be finishing this later on, but in the meantime, keep an eye out for my new Galil ARM.

Topic by E Pluribus Unum   |  last reply


Failed Three-Layered Gun

People don't often post 3-layered guns, so I thought I would try one, and (as you can see by the title) it did not turn out so well. It got maybe 40 ft. of range, but that was an accented, as the gun never shot again. It was a good attempt, and is not too ugly, but, it is still a failed project. I just thought I would share it with you guys. Keep an eye out for more projects from me! -E Pluribus Unum

Topic by E Pluribus Unum   |  last reply


ill stay on ibls for only 3 month's

I'm staying for around 3 month's that's like 5-12 ibls posting

Topic by k-n-e-x(leaved ibls)   |  last reply


New Starwars knex gun?

'm sure you guys know about starwars battlefront ll,well i wanted to make a gun from there but i thought it would be too hard. You guys get to chose (Sniper) http://starwars.wikia.com/wiki/E-17D_sniper_rifle or (Blaster rifle) http://starwars.wikia.com/wiki/Blaster_rifle . Put your choice in the comments i will start building when i get 5 requests for one single gun like 5 for Sniper or 5 for blaster rifle

Topic by Flatout Knex    |  last reply


Would it be possible to focus a laser beam to an even smaller point? Answered

I was thinking maybe fresnel lens+ high powered laser+ even more high powered laser!!

Question by norsehorse   |  last reply


what is the best knex gun?

All in the title

Question by Im_the_knex_god_hail_me   |  last reply


Good knex gun?

I want a good knex gun that dosent use  to many peices

Question by Im_the_knex_god_hail_me   |  last reply


m1911,92fs,deagle?

Ok ive been knex'ing for a little bit ive decided that i like pistols the most. my favorite being the M1911 and beretta 92fs but the king of all pistols the desert eagle i have seen every replica of this gun/guns (including the other two) and none of them work like them. if im correct selezonias M1911 looks real but no mag in the handle and no slide. i havent seen a beretta yet. and the desert eagle no one has actually made one that works like the real one (back slide action) the closest gun ive seen is ironman's i forget which one so i want everyone to tell me which one i should build. your vote would be very helpful.

Topic by Im_the_knex_god_hail_me   |  last reply


what web sites can I go to to listen to music for free?

What web sites can I download free music with out using a confermation e-mail adress?

Question by Laserman595   |  last reply


I need results for a project. please help

Is capital punishment right, if someone has committed first degree murder? this is a poll. a) I support capital punishment b) I am against capital punishment

Topic by E-R-IC   |  last reply


cna some one post me a picture of an unmodded bbkwg2 plz? Answered

I want to make it again but i cant find a picture of one unmodded

Question by knex man123456   |  last reply


I come back

happy china new year! Another day to tell you about New Year customs. i like new year~ i like  Smile~ please call me E-mail 845430593@qq.com QQ:845430593  

Topic by china candy   |  last reply


Smokeless bang? Like a pistol blank but does not emit smoke, Any Tricks? Thanks?

I am needing to make a gun prop for a contest, However I am not allowed to make any smoke.... Help? Thanks

Question by KyleofAsgard   |  last reply


New And Good Knex Guns And Weaponary

What has happened to all of the good knex guns and weaponary. If you took the quality of all the Killer K Copys and put it together we could make an ultimate knex gun. I was Just thinking wouldnt it be good if there was a contest on the ultimate knex gun or weapon (Sword etc)

Topic by Danny A   |  last reply


Digital editing: How do I best combine two songs into one, basically alternating between the two?

They are in the same time signature, but one is in E major and the other is in d minor. I was guessing that would clash too much (?). I found the change pitch took in Audacity and thought that would be good. Should I change the dminor one to e minor or c? I don't know too much about sound editing. I only have Audacity, but perhaps my university has more I could use. Also, other than fade in/out, are there any other good tricks to use? I want it to sound like a real song, not a poorly chopped together thing.

Question by wearingpink 


How to look like a pretentious jerk

Include this in every single email you send "CONFIDENTIALITY NOTICE: The information contained in this electronic message is confidential and intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this e-mail or any of its components is strictly prohibited. If you have received this e-mail in error, please "reply" to the sender." The terribly funny part is my coworker attaches these to the most mundane emails, this one from a reminder of a meeting tomorrow. But the real kicker? his email ends in ocfl.net, as in orange county government, which means ALL his email is public record under the sunshine laws. People are tards.

Topic by Tool Using Animal   |  last reply


Yo-yo

Hello, I have been trying to do the trick Boing-E-Boing for a while now, but I just can't get the split-bottom mount right. Whenever I swing it around my finger, it just bounces off the string instead of staying on it. Could someone help me?

Topic by PineapplebobTheGreat   |  last reply


How to make a cord with a headphone jack on each end?

I would like to know how to make one of those cords that has a headphone jack on each. the ones that you can plug into an mp3 player and then into another head phone input? Thanks for the help!

Question by TBolt   |  last reply


Your Ideal K'Nex war weapon set?

What would your ideal knex war set be? For: a)1 weapon b)2 weapons c)3 weapons d)4 weapons e)5 weapons f)6 weapons g)7 weapons h)8 weapons It should be shown as below, say you have a 4 weapon war, you would have the weapons from a-d. So, sort of a ranking system of what guns you would use. Mine would be: a)BR18 b)Storm 220 V2 c)Storm 221 V2 d)Jamassault pistol e)TJSG Shotgun (Slideshow soon) f)TJMT - My secret project ;) g)Zak's Assault rifle h)Knexsayer Thanks, hope you join in!

Topic by The Jamalam   |  last reply


Happy Birthday, Spam!

It's quite appropriate, given the recent spate of spam threads, to find out that this weekend is the thirtieth anniversary of the first spam email:The first recognisable e-mail marketing message was sent on 3 May, 1978 to 400 people on behalf of DEC - a now-defunct computer-maker.The message was sent via Arpanet - the internet's forerunner - and won its sender much criticism from recipients..........The sender of the first junk e-mail message was Gary Thuerk and it was sent to advertise new additions to DEC's family of System-20 minicomputers.It invited the recipients, all of whom were on Arpanet and lived on the west coast of the US, to go to one of two presentations showing off the capabilities of the System-20.Reaction to the message was swift, with complaints reportedly coming from the US Defense Communications Agency, which oversaw Arpanet, and took Mr Thuerk's boss to task about it. So, how do you plan to celebrate?BBC storyAnother article, including the actual message

Topic by Kiteman   |  last reply


How do you unpublish an Instructable?

I have an Instructable that I posted that I want to unpublish now, so that I can add to and improve upon it. I can edit it, but if I have to stop while in progress, my Instructable will still show. I can't seem to be able find where I can unpublish it at - does anyone know? Thanks, Bran E.

Topic by Bran   |  last reply


difference between monkeys nad human beings? isnt it nature or nurture that is creating the difference?

Good evening!!!! i am facing much difficulty in finding the differences between monkeys and human beings?isnt it nature or nurture that is creating difference? i-e vocalization of speed etc.... plz help me out in this work assigned to me by my instructor in university... regards!!! Lubna

Topic by Lubna   |  last reply


What is the best thrash metal band of all time?

This is a voting poll, it ends on new years day 2010. You are allowed to choose from: a)Megadeth b)Metallica c)Slayer d)Anthrax e)Trivium f)Lamb of God To make collecting votes easier for me, reply to one of my comments, don't make a new one.

Topic by The Jamalam   |  last reply


Guitar String as Record Stylus? Answered

I'm wondering if you can use the high e (smallest one) guitar string as a record stylus, because I lost the stylus I have. I cant find one anywhere and they're too expensive online. I've tried it on an old record, but the sound is kind of distorted (the pitch keeps fluctuating). Will it harm any records?

Question by josh1324   |  last reply


How to change old speakers into amp.

Help! I've got a pair of JVC 5-way speakers that I'm trying to power with a Danelectro E-studio 9V headphone amp for my guitar. I've been successful using it to power some old walkman type two way speakers by just plugging into the headphone port. The JVC's will take up to 400 watts. I made a small port 1/8 plug but to no avail. Any ideas?

Question by    |  last reply


Help! My low voltage, outdoor lighting wont light up - transformer error codes?

I bought a Portfolio 300watt transformer for low voltage outdoor lighting and hooked up a 100' 12 gauge cable (outdoor rated lighting cable) to it. Then I hooked up 4 low voltage lights (12volt 20 watts each). I plugged the transformer in to a gfi outlet that I ran out from the house. And turned it on. The little display flashes "E" and then "1" . The instructions say that the E means that there is a fire hazard so check the circut. So I unhooked every light except one. Same error. I hooked on a different light and unhooked the first one. Same error. Instructions say the cable needs to be under 250'. And the load less than 300w. I am there, except it won't run. Do I have a bad transformer or is there something that I am missing? Oh, and this is to light my haunt in my front yard, so I am running out of time! Thanks for any advice! Matt

Topic by mckeephoto   |  last reply


Led light Panel Help!!!!!!Please

PLease help im not a novice in the world of electronics i .e i went to college,although many years ago. Im looking for a the easiest way to wire 200 leds into a light panel...... ie 200 led's in 50 x 40 there 3v leds What be the best way to wire ie,what power suply do i need,resitors etc Please advise thanks jim

Topic by hairyjim   |  last reply


fan club Traistariu-contact-0722.410.597

Cu Tornero, Mihai Traistariu s-a impus imediat in peisajul muzical din Romania. Este prezent pentru recitaluri in Romania dar si in strainatate, si este permanent invitat la spectacole, lansari, campanii electorale, petreceri diverse, manifestari orasenesti, nunti, botezuri si revelioane. Contact impresariat artistic si programari-0722.410.597 sau 0745.503.350 ori trimiteti e-mail la tvbucuresti@yahoo.com

Topic by traistariu 


To Whom it May Concern

To Whom it May Concern:I recently discovered a website dedicated to knex: http://www.knextoyzone.com/. However, on this website I found three familiar guns found on Instructables and KnexInnovation. Two are Dsman's, and one is Loosewire's. They are found by clicking on "Gallery" amd then the subcategory "Guns". If you didn't post these guns and knew nothing of this, please speak now and maybe we can e-mail the creator of this website that their users are commiting plagiarism. Thank-you for your time.

Topic by DELETED_DELETED_DarthVader   |  last reply


Ipod Issue

Okay, I am having some weird issues with my Ipod Issue number one: My Ipod won't sync correcting. My plugged it into a different computer with Itunes installed, but it won't sync to it, even though it says, syncing or w/e. Why is this happening? (I put this in the forums because all my answers I submitted days ago still isn't on the list, so I figured this would be better)

Topic by Rock Soldier   |  last reply


Mod of Katarukito's Knex slingshot prototype

This is a modification of the sling shot prototype made by Katarukito's (I hope i spelt that right) knex prototype sling shot knex gun. It can pierce cardboard at fifteen feet away with one band and twenty to thirty feet away with two rubberbands (UNSHARPENED BULLET) I modified the barrel with a new barrel, that may look ugly but if you want i can take off the blue and red connectors that make the humps/ scales of what i call... Dragon Head Knex Gun DHKG well i didn't intend on putting those there but it turned out as a dragon and well, i went with it... the barrel doesn't bend and when or if i do post it, all credits go to Katarukito! Enjoy! Sorry for the blurry pictures it was night time and i had to pee like a race horse... Pic 1: The bullet - A red rod or tan rod with tan clip Pic 2: Front view (DRAGON HEAD) - Front of the gun where rubberbands go Pic 3: Another front view (Barrel) - Front of the gun better picture Pic 4: A view of the back (Part of Kataturi's knex gun prototype moded) - View of barrel and handle Pic 5: Better picture of back (Katarukito's prototype still able to be seen, just modified) Pic 6: Full gun - (the full DHKG) - Aprox. Two to two and half feet long ~ Pic 7: A view of the gun loaded - Gun is loaded Pic 8: A view of the gun loaded from the front Pic 9: Back of the gun with sights

Topic by mrbox   |  last reply


Looking for standard knex (no bricks).

I am looking for standard knex (preferably no bricks). I live in Perth, Australia and I am looking for a NEW (not e-bay, used amazon stuff etc.) set with a motor in hope of creating a ball machine and other things. I have already looked in Big W and Target. Please give suggestions to sites or stores, and if someone can give a good average price for a certain amount of bricks, that would be appreciated. Thanks!

Question by Exscaly   |  last reply



Video Game Movies?

Hi guys! Im an indie filmmaker and i want to make a video game short film. Please suggest what you think i should make. Also i want it to be T and under (T,E10,E) no M except for a rare occasion. I will be posting forums semi-frequently like this. Well? HAVE AT IT!!!!     COMMENT!! SUGGEST!!! PLEASE? YAY!!!!!!! PS i will feature you in the creds if i use your idea PPS i will try to make behind-the-scenes instructables w/ wideos PPPS the cake is no lie!

Topic by the_real_mccoy_   |  last reply