GAS PRICES

Ok I have to do a public speaking presentation and i am doing it on the price of gas! what should i say if you have anything i can add to my presentation or any facts and things that you know please tell me!!

Topic by rickick   |  last reply


Knex Pricing

How much is Knex going for? I have a 33 lb. lot and was woundering how much you guys would pay for it.  I have lost all interest in Knexing, and am now into the real thing. I made the 6 foot and it sucked, but it did fire about 40 yards (you guys way over estimate range, there's no way you could get 200 yards out of a knex gun, I built the sr-v2 and it went 25 yards.)

Topic by Knex_Gun_Builder   |  last reply


Where are PIC16F628(A) programmers & prices available ? Answered

I have been having a real hard time finding them....and I don't normally have a rough time with Google :-) I am FRUSTRATED and you thought I was actually GoodHart LOL I found a lot of advice out there (simple to use and efficient JDM type programmer......no, JDM's rarely work, use MCU.....try this Starter kit....don't use that starter kit, it is inaccurate.....etc. & etc.).

Question by Goodhart   |  last reply


Is your local shop ripping you-off?

I was vaguely interested in wholesale prices for shop products, and managed to find this price-list. The wholesale price is WSP, RSP I guess is the Recommended Sale Price (I think there must be tax in there somewhere), and whatever POV stands for would be the margin. If you think someone's expensive: either they've got an expensive supplier, or you don't know WSP, or they are making the most of you. (But remember, 8-'till-laters work hard to earn a living, they do need some margin) P & H price-list - as a major distributor these prices will be around the "good as one can get" mark. E.g. Haagen-Dazs 100ml £23.99 for 24x = £1 per tub        Hovis Soft 800g £1.14 ea        Cheesestrings Cheddar 21g £9.24 for 24 = £0.385 ea        "What not butter" 1Kg £18.14 for 12, £1.51 ea Or just marvel at what crap you can stock your shop with.... It's only a bit of searching, you could check your prices (different country) by searching specifically differently. (Look for who is delivering stuff) I do remember a local shop which was regarded as a rip-off to the extent some of my friends would steal stuff by way of compensation... not much though, Pot-Noodle here & there... L

Topic by lemonie   |  last reply


Quality servos for an low price? Answered

Where can i get good quality servos for an low price?

Question by MACKattacksnipe   |  last reply


The Knex Shooting Price Gun.

Hello! I'm JonnyBGood and this is my future knex project/challenge. I work at Familly Dollar now and I use one of these price guns sometimes to put anti-theft stickers on mechandice. They are very comfortable to hold and are easy to use so I thought maybe I can use the format to create a k;nex gun. I am working through another project right now but I will work on this project when I am done. I just thought it would be fun to share my idea and see what other people think of it. Please make suggestions if you have any and if you have time feel free to try to make one yourself!

Topic by JonnyBGood   |  last reply


Does any one know where to get cheap bundles of knex pieces online? Answered

Preferable alot of pieces and new if possible? I have tried ebay but its all used and the box sets are to expensive. Any other sites i can find knex for low prices?

Question by K-Dawg   |  last reply



whats price of altoids in countries around the word?

The price of classic altiods around the world you know the mints just post it here. i know in canada the cost 2.99 i think thats overpried

Question by mman1506   |  last reply


Rising Prices! What are you doing to cope?

Wow! Prices are on the rise, and RAPIDLY! $4.00 A gallon gas, here in the good ole U.S. of A. Have you been to the grocery store lately? I haven't, my heart cant stand the strain. When my wife tells me grocery-price horror stories, I have to make her stop so I can take my blood-pressure meds. I've always been frugal, maybe even tightfisted. I'd just like to build up something I'd be proud to leave my kids and grandkids some day. (Note to Skunkson: No grandkids for at least 10 years!) Sacrificing comfort in the interest of a better future is a noble cause. But the current economy is squeezin' this poor boy to death! I am: A) Trying to get a job closer to home. B) Parking the SUV. C) Driving the crappy, egg-shell, crackerbox economy car (and the Harley to soothe my male ego). D) Adjusting the thermostat. E) Doing more with the garden and the chickens. F) Rationing my beloved Coca-Cola. So what are you doing to cope with the raising cost of getting by? Real suggestions would be best, but humour wouldn't hurt, as the only thing I've laughed/cried at lately is my plummeting bank account.

Topic by skunkbait   |  last reply


Can a retailer change the price of a item already in stock?

Can a retailer change the price of a item already in stock? Say a book is 5.99, can a retailer mark up the price of the book while its still on the self? I had someone tell me that it was illegal for a retailer to increase the price of a item already on the self...

Question by west49rules   |  last reply


what does that have to do with the price of tea in china? Answered

I've been wondering this for a long time! XD

Question by www139   |  last reply


Where can one buy Plexiglass at reasonable prices in reasonable quantities?

Is there any place (chain store, website, ebay shop, whatever) that any of you know of where one can buy plexiglass at reasonable prices without having to buy in bulk? Everywhere I have found has minimum shipments that are to large for me to efectively use.

Question by elyador   |  last reply


Can someone tell me the price of 1 x 1 timber at Bunning's Warehouse? Answered

Well, I making one of these and I need 1" x 1" timber, I can't get there until the weekend, but I'd like to get a price so I can give my friend an estimate on how much the sculpture will cost. Thanks

Question by Pie Ninja   |  last reply


Looking for help to change songs in Fisher Price Music box Record Player 2010

Hi there. I'm interested in seeing if anyone knows if it's possible and considerably easy to change the songs that the Fisher Price Music Box Record Player plays. This is NOT the original version with an actual music box in it. This is 2010 version which has some sort of sound chip in it. We have opened it up and it seems like you should be able to just replace the chip that has the music on it but we have no idea how to do that. Just curious if anyone has any ideas! Any help would be greatly appreciated! Thanks in advance!

Topic by tidalfingers 


What would the cheapest lpa (low pressure air) system be priced (paintball) ? Answered

I'm going to be buying a JT USA Cybrid that operates on low pressure air systems. I need to know what a cheap LPA System would cost. I haven't found a cheap one yet, but I know their out there.

Question by Paintballer98   |  last reply


Shoe Suggestions? Answered

Hello all you in the Instructables Community. I need a new pair of shoes. They need to be casual yet can withstand the outdoors. I would like them to be in a reasonable price range though. I would prefer them to be in style if possible. If you have any suggestions that would be great! Thanks, joespicnictables

Question by joespicnictables   |  last reply


What airsoft brands make good M4's? Answered

I want to get a new airsoft gun. My price range is 150 to 300 dollars. So many brands make M4's so I need to find the best one for the right price. I know M4's are extremely popular but Iove the look of them.

Question by airsofter1   |  last reply



How much would you pay for a DeskSquid?

I was going to look into some mass production options for something like this, there's been a lot of interest but even I thought the cost a little high (close to ~$50 in parts). Before I even bother contacting a manufacturer I wanted to see what my fellow makers would be willing to pay, just to see if this is doable.Forget what's it worth, if this walked into the hardware store what would be your "buy-it-now" price, think about it price, and forget it price.*Just the desksquid not the mini

Question by BioZone   |  last reply


Which is the best foreign acoustic guitar pickup now avaliable?

Plz give the clear idea about prices of acoustic guitar pickups.. 

Question by tijoabraham1   |  last reply


I was wondering if you could tell me a couple of good brands of reasonable priced electric drum sets.

I'm just starting out playing so i don't need a pro series or anything. and I only think that i need electric, because my parents are all for my being able to play quietly if not silent. (kind ironic don't you think?) but if there is another way to make acoustic set be quiet then tell me please.thanks.

Question by frannyloo   |  last reply


What can I use for a spy camera?

I want a tiny spy camera, but dont want to spend the price, any tips?

Question by Thelonelysandwitch   |  last reply


Good iPod touch/iPhone games???

Hi!! I need some advice on what iphone games i should get:):):):) Price isnt an issue;P

Question by chrizw123   |  last reply


XBOX 360 e305 faceplate

I was looking for a new 360 face plate when i saw the e305. then the price...$300!!!!!!!!!!!!!!! so why not make a fake? look it up on google and ebay.

Topic by ejdarklord   |  last reply


Guess the Pieces contest!

Https://www.youtube.com/watch?v=ujG-N3goqKgHello, So recently, I’ve finally finished counting all the pieces in Convolution. I thought it might be a cool idea to make a contest about it. There will be separate categories with points awarded in each category. The one who has the most points wins! You are allowed to give ONE guess for each of the categories. Here are the categories and the scoring system for each one: 1) Grand Total: Guess the grand total of the piece count. The closer you are, the more points are awarded. If you are within 50 pieces, you get 10 points, within 100 you will get 8 points, within 250 and 6 points are awarded,  within 500 and 4 points are awarded, within 1000 and 2 points are awarded, and within  2000 1 point will be awarded. 2) Most Common Piece: Here it is simple; just give your guess of the most used piece/part in the machine, and the amount of times it occurs.  You will get 2 points for guessing the correct piece/part, and another 2 points if you are within 50 of the amount of pieces used. 3) Least Common Piece: Just as simple as the second one, guess the least used piece/part in the machine and the amount of times it occurs.  2 points will be awarded for the correct part/piece and another 2 points if you correctly guess the amount of times it is used. 4) Price Total: In this category, simply give an estimate of what you think the price of the machine would be if you were buying it piece by piece from the K’nex website.  Prices are based firstly on the K’nex website, and if the piece is not found there, the price will be based on the price of the K’nex User Group. Prices are calculated in USD. If you are within $25, you will get 6 points, within $50 and you will be awarded 4 points and within $100 and you will be awarded 2 points. For reference, my room measures 2.28m(7’6’’) high, by 3.65m(12’) by 2.74m(9’). Also, here are some pictures and the video for reference as well. Video: https://www.youtube.com/watch?v=ujG-N3goqKg Best of luck to everyone.  The contest deadline will be February 10.

Topic by koolcoasterkid   |  last reply


How to make an Equalizer T-Shirt? Do they sell those eq panels ?

I think people buy those panels attach them to tshirts and sell me for their own price :D

Question by  


Selling My knex help

I planning on selling my knex i have 10lbs worth and 2 rollercaster kits and 3 motors. What would be a good price to sell them quickly?

Topic by superbestknex   |  last reply


Hey guys, thinking of turning a room in to a ball pit, I've seen prices for various balls, any cheap alternatives?

Yes this is inspired by a combination of three things, that infamous XKCD comic strip, THE LIST and a few conversations with friends.  It's the cloakroom of my house, which is small but not too small for say six people and a few thousand balls...  Important points, using the online calculator it would take around 800-900 balls at a diameter of 3.155 inches.  The floor area is about 50 sq. feet and I'm attempting to get the height at around two and half feet deep.  So suggestions, obviously if this insane project comes together on a budget of zero there will be a full instructable involved, which would make for awesome photos, think victorian features and stain glass backdrop to a ball pit...

Question by killerjackalope   |  last reply


3d puzzles

Hey guys, I have a couple of really cool puzzle designs that are printable. And I'm thinking of opening an online shop to sell just the designs. What price would be reasonable for a game/art design? And would you ever Buy a design? And if so, what price would you pay for a relatively simple design? What would you be willing to pay for an intricate design? I know thingiverse is awesome, and open source is the way to go. Though currently I'm a poor college student who's playing around with some 3d designs Trying to see if I can earn some extra money here and there. Thanks your help guys, -Tom

Topic by tommytai3 


God source of black light LED's?

I need some black ligt LED's for a couple of projects i need to make, I need a place to buy large quantity's, and for a reasonably cheap price. Any help?

Question by XOIIO   |  last reply


Aerogel: Has anyone fooled around with this much ?

A Link to a recent Aerogel articleAnyone mess around with this stuff at all? Is it still a bit on the steep side price-wise ?As a Building materialNotice in the picture how well it insulates against a torch flame:

Topic by Goodhart   |  last reply


I'm thinking about buying a DS

 I'm thinking about buying a DS Lite but I was wondering if I should wait till the DSi XL comes out and hope for a DS LIte price drop.  Does anyone know if this will happen or not? Thanks

Topic by sardines454   |  last reply


Cheap lego lots, anyone? Answered

Anybody know where I could get a ton of legos for a good price? I earn 10 a week, so try to make it fit that. I'm making a post apocalyptic DC, to let you know. Thx, builder968

Question by builder968   |  last reply


Insulating home window tint for cheap?

Winter is coming like they say on the wall...For me it means I need to find some option to increase the insulation rating of these old windows.3mm thick glass in not really fully sealing sliding frames is a pain.For my last place I had the permission to put proper foil on the windows at my costs.I guesstimated what I need and just ordered the required amount on a roll.That was a few years back though and now prices exploded.Last time I had to pay around $3 AU per meter, now the same material is quoted at $14.95 AU per meter :(My windows go from floor to ceiling and at these prices covering them would cost me more than a months rent.I am sure insulating window tint is available outside AU as well.Does anyone know any sources with half decent prices and low shipping costs?Found one supplier in the US willing to ship to AU but was quoted over $100US for the shipping of one roll (120m).Means all up I would be looking at still a bit over $600US plus postage and there must be cheaper options :(

Question by Downunder35m   |  last reply


whats the difference between a good & a not so good audio potentiometer?

Looking to buy some potentiometers for a guitar project, i see the £1.50 500k audio pots that are usual style and some that are 4x the price and have a square enclosed case, still 500k audio. whats the difference and is it worth it?

Question by    |  last reply


Where can I get a left handed bolt???

I want a left handed bolt for the bolt puzzle in the "puzzle" section of this site. No one in my area has them, just the nuts. Anyone have an idea where they are sold for a REASONABLE price in small quantities, like 1?

Question by josht   |  last reply


where can i get a big ball factory set? Answered

Does anyone know where i can get a big ball factory set for less than $50 i know ebay has them but their prices get up to high please help

Question by knexsuperbuilderfreak   |  last reply


Periscope

I'm looking for a gaget that will allow me too read book titles of prices on low shelves without crawling on all fours. Hey, I'm 74. I look rediculous in libraries and find it hard to get up. Some sort of a periscope might work, or a traveling low chair to scoot along on and handle to help get up.

Topic by Nina Holland   |  last reply


what is the best way to sell a used ipod nano 4th gen? Answered

It is a blue ipod nano with very few scratches. i will be including a sports strap, and a regular rubber case.  anyone have any suggestions to find out how i could get the best price?

Question by yankeee7   |  last reply


how do i start paintballing??????

I'm really interested in paint ball but i don't know what kind of gun or pakage i would get???? please help  attach  links in your comments  thank you and could u tell me if this is a good pakage for the price   http://ultimatepaintball.com/Kingman-Spyder-Sonix-Paintball-Gun-Marker

Question by zupyo22   |  last reply


dose any1 want to buy tons of knex ?

Hey well i have bin into knex since forever but now i think its time to get rid of them . there are about 10,000 to 13,000 knex so if you want more info inbox me . about the price we wil discuss it in the message .

Question by golongboard310   |  last reply


A New Ultimate Resource for Recommended System Specs!

I found this new website for all you gamers and system builders out there that provides really good recommended system specs with price breakdowns and vendors! Now I can stop bugging my buddies each time I want to get a new system!http://recommendedspec.com

Topic by tom.needer 


Possible way to help the economy?

So, I was thinking for a few days, and have came up with a few questions, and some possible answers(solutions?) 1) Companies and buisnesses are loosing employees because they can't pay them, or employees are quiting because they aren't payed enough, and therefor, companies are loosing more money, correct? Well, what if people volunteer to work at buissnesses(for this example, we'll use a restaurant) to help out. Obviously, they wold have to be qualified, and still be "hired" In doing so, companies would more help, better work efficiency and hopefully, more buissness(more money) When they get more income, they can pay their volunteers and both the buissness, and the (now paid) vounteers make more income. 2)How are we loosing money? I never really understood how we're loosing money as a nation, and why the government can't make more. Who's to say that we can't print more money, and give it to people, and companies, and even other countries? 3) People can't buy products because of the price. Companies are raising prices, which means more people can't buy products. If companies and buisnesses were to lower prices, people would be able to buy the products, thus companies would make money. Maybe at a slower rate, but eventually companies would have more money to pay employees, and more money to hire and pay more employees. Employment rates would possibly go up, and so would the economy. What are your guys thoughts?

Topic by Rock Soldier   |  last reply


PS3 or x-box 360

This is my situation: 1. My best friend lives right next to me and owns a 360. I can go an play his all the time. 2. The price is not important (I've saved up) 3. I don't have an HDTV 4. I want the best graphics Which console should I buy? Will the PS3 come out on top in a year or so?

Topic by Toddson   |  last reply


How would I go about making this instead of buying it?

My husband and I are looking into remodeling our bathroom. One of the things we both really like is the waterfall spout for the bathtub. Unfortunately the cost of this is way out of our price range. Does anyone have any idea of how we would make this on our own? Would it end up being cheaper?

Topic by KMRush   |  last reply


Any difference between them?

I wanna buy a classical Controller for Nintendo Wii Video Game, however found two on some online stores. they seems like the same, but the price is a little bit, you know? so i donno which one to choose, maybe you can help me ,thx in advance. 1.the cheaper one 2.amazon one

Topic by wanderer777   |  last reply


can i find a source for small purchases of craft and 'small scale woodworking endeavor' supplies?

Where can i get things like: magnets, squeeze bottles w/ spout (for glu and finishing substances, like shellac and poly-u), industrial ammonia -- 28 % or so, hardwood lumber, etc. ? thanks, rich

Question by Rich99   |  last reply


The new i pod speaker docks

The Griffen Amplifi, The parrot, The i luv, The Gear 4 street party size zero, Shaun the sheep and the heculesAll i pod speaker docks, all different in style, size and performancePrice ranging from £30 - £160Take a look, If you canhttp://www.megawhat.tv/clips/58/ipod-speaker-docks

Topic by mariamhassan   |  last reply


Selling knex guns on Ebay

I thought hey, mabye some people could build Knex guns and sell them on ebay. Because first of all it is kind of hard to build some. What if they were premade for a simple price. I sure would buy one. Well it was just a thought. Also i dont know if you have to get something special to sell guns on ebay. But if you could it may be a good idea.

Topic by TeacherOfTheWays   |  last reply