My Friend ring wraith159 had a old PS1 and was taking it apart he didn't want the external case so he gave it to me and i'm making a box out of it like my Radio Box. any ideas as for what to put in it?
Question by sir-zeke | last reply
Hey. So i decided to get a PS VITA recently. But with all the good games' prices sky high im worried that i would get a ps vita and not be able to play any good games. I dont really want to use remote play (probarbly because i dont have a ps), and i also dont want to buy games for 120 TL (turkish currency, expensive) My cousin has a regular PSP and he gets games for 15 a peice. Is there such thing for PS VITA?? Thanks in advance.
Topic by Doc Penguin
On AVGN new video about the Atari Jag, I don't know how many people i see saying PS2 is 128 bit and PS3 is 256 (they also say the GC is 128 bit - but if the wii is weaker then 360 how is it 256 bit) 1) PS2 is 64 bit with extensions to make it more powerful 2) very few supercomputers are 128 bit 3) NO CONSOLES SAY BITS ANYMORE!!!! - it's all drivers and stuff I hate these people who don't do research then they argue that your wrong, then they say they are to lazy to research - YOUR AT A COMPUTER WITH INTERNET IT'S NOT HARD! - my soon to next question is how do we get anything done with people who cant click a mouse or type 1 sentence.
Question by Sypran | last reply
Hello my name is Charlie, I write from Peru and have some doubts about Drums for PS3 with Rock Band 3. Buy generic drums locally and is identical to the product of China (http://s.click.aliexpress.com/e/iEMfIyBYj?af=130194941), turn on the PS3 with Rock Band 3, connect the wireless receiver and select PS / RB and not working. Change the selector to PS / GHWT and pedal not working. Then again turn on the PS3 with GuitarHero WorldTour, I connect the wireless receiver and select PS / GHWT and operating normally. My question ?: What is the way to operate the drums on Rock Band 3 for PS3 and then use the PRO mode? And if you need to open and weld or add a card, I could indicate how. I have not found something similar in the entire site and then not want to lose my investment. Thanks for the suggestions and I hope you can help me. Cheers, Charlie,
Topic by JohanR6 | last reply
Hey guys!I just bought myself a Ikea PS laptop workstation. I thought it was heavy enough to stand on its own, turns out it isn't. I don't want to drill holes on the wall, I thought about using magnets to give balance to it.Questions are:- can I do that? I mean, magnets to hold a metal structure plus using that to hold electronics such as laptop, DS, camera, mobile etc.- in case I can, which sort of magnets should I buy? The open lid on the Ikea PS supports up to 25kg/55lb, plus 15kg/32lb from the PS itself. There will be support underneath to hold the weight (thought about using glass jars, grouping three on each side, totaling six), so the magnets will mostly add balance to the structure, and not hold its entire weight.Thanks a bunch for taking the time to read this! A good day to all.Cheers,Diogo Slov
Topic by slov | last reply
Using this for my laptop so usb power is possible portable is best
Question by paulie14wyh | last reply
After my 4 guns all being replicas, I need ideas for more possible replicas to well, replicate. Looking for things that range in size between pistol and full length rifle. Gun will be credited for the idea so comment Please and Ty! PS, if you have a picture, that would be cool, if not, IDK!
Topic by Trauts | last reply
I am.... Guess what 'I am going to'... Whoever guesses right firstly gets a patch, 10 5* ratings, and a sub from me. Get guessing... >=] PS- I do not mean 'I am going to...' a different country on holiday or whatever. I mean something im going to do.
Topic by Hiyadudez | last reply
I won 2 tickets to Berlin Maker Faire this weekend this weekend but cannot go. It's for two people and includes 2 days. If anyone is interested all ou have to do it be the first person to let me know you are interested and promise to enjoy yourself. PS I will be jealous
Topic by world of woodcraft | last reply
I found this idea on an army of two 40th day gun idea site. I think that it would make the ultament weapon for knex wars. i would like to build this but i could use some help with the brass knuckles part and the knife. please help me with this awesome gun. knex man123456 ps. how do you change your name.
Topic by knex man123456 | last reply
Hi everybody, I ca'nt finish my ball machine. I tried to build chain lift or wheels but I failed... I haven't got enough place to build a chain lift (see on pictures). I hope someone can help me to finish it because I'm on it since 3 days. Thanks for advices and help. PS Sorry for ortograph (I'm french^^).
Topic by ericpropre | last reply
Here's a little something I did with my pal Foofinator last month. If you haven't seen it on my YT channel last month, here it is. PS If an admin sees this can they fix the embed code, the option to embed video has suddenly disappeared from the formatting. In the meantime just use this link: http://www.youtube.com/watch?v=qPMgV8pI_eI
Topic by DJ Radio | last reply
I have made a really good new firing mech. its a hammer but dont let that put you off its more realistic then a ram rod and more powerful. this is brand new no one has ever done this before that i have seen. no one copy when i post pics ps my camera is not working right now so i will post pics soon thats it for now.................
Topic by finmonster | last reply
Because I am very inexperienced at building knex :( and direly need more pieces, i thought I'd ask the general public by starting a forum. :::::::::::::::::::::: DDDDDDDDDDDDDDDDDDDD Please post where and how you purchase good knex for building. I'm sure this information will help everyone.XD ps: I should post the pic in the Louvre! :DDDD
Topic by salbabob | last reply
Hello everyone,I'm looking into automating my home. Control anything from every where. Some sort of centralised computer that will controle my home. Like Hal from 2001 or Sarah from the tv show Eureka.For that I need instructables, I already found this, this and this. but i need more. Any one else know of any instructables that can help me accomplish this task? PS I already made a group for this.
Topic by Anoniempje | last reply
It's time to change my room around and I'm clueless now because I've changed it pretty much every single way. The picture below is how it's currently arranged, professionally done in PS. Could anyone give me any ideas for arranging it differently? My desk is a corner unit, sorry all I could draw is a square, too lazy to freehand. Thanks in advanced.
Topic by Punkguyta | last reply
I have got to use all the buttons,dpad and thumbsticks of the "cabelas top shot elite" lightgun though the "Xbox 360 Wireless Gaming Receiver" except the sensorbar crosshair can i be able to use it on pc somehow? ps. using joytokey (http://www.oneswitch.org.uk/2/I/JoyToKey/JoyToKey.htm) cant find the axis for the crosshair at all. any suggestions?
Question by bubbadamage
Hello, this is just a test. I created a new topic from the group-Website, but I still couldnt find in the "Select a category group and category" the AT-Group listed. Therefore for this test - i do not choose anything, hoping, that than this will land in the correct group... Hey - finally it will be solved!! PS: NOOOO - I HAVE to select a category and group!! What shall I do - I cannot find the right group in the pull down. NOW I will take the "Forum" and "LIFE"
Topic by SteveMcCraft
I AM MAKING A RUBBER BAND POWERED BI PLANE. I HAVE COMPLETED THE WINGS AND AM GOING TO ADD THE TAIL SECTION. THE PROBLEM IS THAT MY MODEL SO FAR IS NOT AERODYNAMIC AND JUST TUMBLES THROUGH THE SKY. IF SOMEONE COULD GIVE ME TIPS ON HOW TO MAKE IT MORE AERODYNAMIC IT WOULD BE OF GREAT HELP. A;SO HOW AM I TO ATTACH THE ENGINE. PS THIS IS MY FIRST MODEL AND I AM PLANNING TO MAKE AN INSTRUCTABLE.
Question by luftwaffe29 | last reply
Hey all, I decided that since so many people were wanting to see my new gun, I'd post it early. Besides, there are so many christmas guns because people were following the trend, that mine would be overlooked. So, take a look, tell me what you think. www.instructables.com/id/TJASTR2-1/ (PS I know this is a bit spammish, but since my last instructable wasn't posted for 4 days, I'm thinking that this might not even come out for christmas.)
Topic by The Jamalam | last reply
Hi, im new to Instructables, and i havent found a good looking sniper i can build :s i got around 95 yellow connectors, 10 blue spacers, and 6 grey spacers (ouch!) and i got no misc. pieces only some tan connectors and the black/blue moveable thins (idk the name) so if you can help me finding a nice looking sniper rifle (range doesn't matter) please let me now :) ps. sorry for my bad English, it aint my native language
Topic by iColourStuff
This saw the ride from thorpe park. it is a micro knex coaster. it has the blades on it that almost cut your face open and the car misses them by under a inch!!!!!!!!! (or 2cm). unfortunatly it currently has no chain on but it used to and it worked fine with it. should i post instructions??? ps. this has nothing to do with saw but has anyone ever seen a girl knexer that is actually good?? if you do want instructions you can have them for this or my new safe.(knex bank style safe)
Topic by slithien | last reply
Hi guys! Im an indie filmmaker and i want to make a video game short film. Please suggest what you think i should make. Also i want it to be T and under (T,E10,E) no M except for a rare occasion. I will be posting forums semi-frequently like this. Well? HAVE AT IT!!!! COMMENT!! SUGGEST!!! PLEASE? YAY!!!!!!! PS i will feature you in the creds if i use your idea PPS i will try to make behind-the-scenes instructables w/ wideos PPPS the cake is no lie!
Topic by the_real_mccoy_ | last reply
Hi guys, just wanted to let you know that I don't think I'll be on ibles anymore, there are just more important things in my life than K'nex. Sorry if this looks like i'm just trying to get publicity too, I'm not. And if you think I'm fake, then I must be the best faker in the world. PS. If you're interested in buying some of my K'nex or all of it, please let me know. I have about 15 pounds, and if anyone is interested in buying I might do a full piece count.
Topic by MotaBoi | last reply
Whas'That?- A knex competition where you have to guess which knex gun/weapon this is off. All you have to do is post a comment with a link or the name of the weapon that the piece belongs to. WINNER IS DJ RADIO, HE HAD A CORRECT GUESS OF IAC'S HEAVY CANNON, CONGRATS TO HIM! :-) PS. If its your gun, do not give the answer please, thanks :-) Prize- A patch- from KSC (thanks) Subscription from me 5* on 5 ibles of your choice Fave 5 ibles of your choice Good luck!
Topic by Hiyadudez | last reply
I would like to know how a real minigun works, like I know a minigun has multiple turning barrels but How do the bullets get fired, is there a single firing pin or does every barrel have a firing pin. I tried to find this out on wikipedia but I just can't figure it out. PS: I would like to know this because I'm trying to construct something similar with knex.
Question by Mr. Muggle | last reply
Please i have a Buster Sword but it stinks and tutorials all over the internet almost always require wood and i want to make something that doesnt cuz i dont want to do all the work plus my Dad wudnt be too crazy about me having a giant wooden sword, especialy when me and my brother fight ;) Can anyone help? PS: ignore the comment on the second pic thats for a slideshow
Question by FFVIIBOY | last reply
Hi, I have just relocated to Switzerland and live in a rented accommodation. The master bathroom has double sink wooden cabinets. Unfortunately, the top surface of the cabinets is not covered by glass, marble, or quartz. The sinks sit on the surface (solid wood). No matter how careful someone might be while hand washing etc., you can't get away without splashing. Major stress if you think that you might need to pay for replacement of the cabinets at the end of tenancy.How could I protect the area? Many thanks PS. (link) Master Bathroom sink top pictures
Topic by ADoZ | last reply
I recently bought a mid-century rattan dining table with four chairs. I want to replace the cushions on the chairs - two piece, but they have snaps to keep the cushions in place. I do not plan on having snaps on the new cushions, but that leaves me with the male part of the snaps. If I pull them out, which I want to do, I will be left with a bunch of holes and no clue how to fix them, and since I haven't removed them yet, I have no idea how deep the holes will be. I am open to any and all suggestions. Thank you! PS, I've tried to upload photos, but it's not working.
Topic by Luny | last reply
How many top ranked Knex guns have u built? Have u discovered any problems with the design? If so what? I have recently built several top ranked assault type Knex guns and have run into multiple problems I was wondering how faulty weapons get such high ratings Its frustrating to build these guns and run into so many basic design flaws ps although i haven't built the assault pistol by Viccie something i must give credit to him for making a quality weapon that doesn't have too many design issues nice work! SRv2
Topic by Knex Lego Maniac | last reply
Hello everyone, I am going to have a knex transformers contest as you can tell. If you don't know what a transformer or knex are you better get off this forum, just kidding. Anyone interested I will be more than happy to see your work. You will build the fist model from May 5,2009 to May 18,2009. You will then build a second model the next two weeks, then the third model the next two weeks. Each model will be judged three times!!! Build away and good luck. PS> I might enter <
Topic by FeverSoccer | last reply
Hi its megametal8 I was wondering whats the best knex?! I also want to build an army off them MUST'S: No cut pieces Magazine Not too big True trigger Good looks Good range That may seem like quite a lot but they add up to the best i guess Oh yeah i also want a flick knife if you've made a good one!! Soooo go find one of the best and there MUST be a link to it ps- If you can't make up your mind you can choose up to 3 Thanks megametal8
Question by MegaMetal8 | last reply
Hey, guys! Any other math enthusiast out there? I just took pre-calc with Trig last spring. My intention was to take Calc 1 this fall while pre-calc was still fresh on my mind. Unfortunately, things aren't going to work out that way. Does anyone have a really creative and fun way to stay sharp on their maths? I already have a few of my own but I want to know what other ideas people have. Thanks:) PS: My current method is solving TED riddles using systems of equations.
Question by RampedUpDIY | last reply
This week pretty much sucks so far. To fill everybody in, I bought myself a nice little gift for my birthday, a 100 inch projector TV. I'm still working on the setup, even though my birthday was in July. Things take time, unfortunately. I was planning on hooking up my desktop PC to the projector, to show pictures and whatnot, it'll be my DVD player too. I have an ATI remote wonder that'll work perfect for it. I already have it integrated into the surround sound, so all I had to do is get a 25 foot VGA cable to run from the PC to the projector. Or so I thought, until it came across my mind that I wouldn't be able to use my desktops monitor. I thought I would just make a solid state switch, but unfortunately, a VGA cable has 15 pins - I don't think they make a dual throw 15 pole switch. So the backup plan was to get a second video card, to use in conjunction with the onboard graphics to do dual monitors. I can make a simple app, and use one of the programmable buttons on the remote to switch which is the primary display. So I went shopping, and I asked a friend what he thought of this one I wanted to buy. How convenient, that he just happened to get a new one, and he would sell me his old one, which just happened to be PCIE x16, for $50.. which is less than what I was looking at, and triple the quality. I buy it, and wait 2 days from it to go from San Fransisco to my house, in central MA. I install it, it works! Yay! I install the drivers, go out for a little bit, come back... dead computer. The thing was a goner, the PS blew, and took the motherboard with it. So I called up compaq... 20 days out of warantee. Great! At that point, I thought it was just the PS. It's 300 watts, running 2 hard drives, 2 CD drives, a 3.3ghz Celeron, and an ATI x1600 graphics card. So I go shopping, pick up a 500 watt one. Come home and install it... same shit. So I knew the motherboard was blown. I look it up, a new motherboard is $200. That's how much I paid for the damn computer! So it's ebay time, I find and win the same model for $250. So yeah, so far, the cost of this week is $350. $100 from the PS. So I put the computer back together, put it on the desk. I wake up the next morning to guess what? Look at the first picture. That's right, the glass desk shattered. The desktop was on the other side, thank god, but guess what got screwed up in that nice, conveniently timed breakage? - The new PS (I exchanged it, but I had to drive an hour to Circuit City) - One hard drive, 2 weeks old. - $90 - Old school soldering iron - costed me $80 back in the day. - A whole stack of DVD-RWs - $30 - A stock of CD-Rs - $15 - A pressure gauge from my Pneumatic cannon instructable - $10 - A bunch of misc electronic parts - $20 - My damn desk! - $120 So far, $715 total. Murphy's law in action right there.
Topic by cvxdes | last reply
Well, I own a Band Hero Drum Kit, and the Red Drum stopped working, it doesn't respond now. I'd like to know how can I fix this? Oh, and by the way, let me recall that it's a BAND HERO DRUM KIT and it is NOT A GUITAR HERO:WT DRUM KIT! They ARE DIFFERENT!!! Because I checked the instructables manual concerning the WT Drum Kit and the images of the GH:WT drums and BH Drums ARE NOT THE SAME! I hope you can help me out :]. Thanks in advance. PS: Recalling again that is A BAND HERO DRUM KIT, NOT GH:WT.
Question by WiiLegend | last reply
Hi everybody im still new and don't know anything about knex but i loved the idea of making engines is there any special kits to innovate new engines and make something new , is there any calculations?? can anybody help me by giving me information websies abou knex for beginners especially for engines. can a knex engine work with compressed air or just with attaching the drive train with an electric motor is it easy to make and is it good idea for prototyping you ideas?? thanks i know that i asked too much questions (im still beginner) and i know that the instuctables knex PROS will be helpful with me PS ,can anybody tell me where can i get a good price buy for a knex kit that contain everything for my infinity innovation
Question by vwtm2006 | last reply
Hi I want to know how to make a mod that is guaranteed to work all the time on XBox live. I made a mod where you connect the middle prong thing on the board and connect it to the first person light, but it only gives me one really fast rapid fire and the rest slow till it builds up again. I always have full batteries and it does work on split screen like it is shown to. So I want to know if there is a way to make a mod that always works on XBox live. Please help!!! PS I know I can get kicked from live but I don't care.
Question by coolice | last reply
Well, last Saturday I bought a Playstation controller from a yard sale. It was an original PS controller, you know, the ones without analog sticks or rumble motors. Anyways, I plugged 'er in, and it played fine. I was able to play for hours with no problems. I woke up the next day, plugged it in, and nothing. The controller just stopped working. I've tried several times since then, and it still is not working. I cleaned it all out on the inside, I made sure the buttons and button contacts were clean, I cleaned the part that connects to the Playstation, but it still won't work. I tested out a couple of working controllers in the same controller port, and they both work fine.
Question by videogamemaster | last reply
I chopped off the tip of my finger with a mower....ouch, now im two months in and i still cant play chords on my guitar. if i super glue leather to it i can play my bass. i have also used banjo picks with band aids wraped around them but these get in the way when i play chords. i cut off about half an inch from my ring finger and nipped my middle finger on my fret hand. any help would be great thanks. D.J. ps the pics are from a week out of surgery
Question by djloney | last reply
Since eberyone doubts it here (finally) are the first pictures of part 3 of project firestorm. They may not be good but the camera had basicly no power so I only got these three. they show my foully modded version with collapseable bipod, ammo storage rack and the cellphone sight v2. the ammo storage was inspired by the trifle 18 turret and holds you guessed it 18 bullets. It looks alot like the storm 220/221 v2's and the morreti sr4 by burrito master (sorry if the names wrong). it is true bolt action and was originally made in january (I think) I rediscovered it in june and remade it into what you see here. Well enough talk just see for yourself! ps if you can make from the pictures I'll let you do the instructable pps this won't be posted for ages
Topic by Fred the Penguin | last reply
Hi all, well i have started to get more interested in the community on here, and i can see it has alot to offer. The only problem is, i dont have alot of spare time. so i need help with things. I mainly need advice on how to navigate the forums- there seem to be so many topics, and so many sections, that frankly its too much and i get confused. how do people use it? do you just ignore entire sections or what? im used to forums where you go on, and it marks any topics that have had changes since you last looked etc. Thanks Gmjhowe ps, you have all been great so far. pps do you like my new avatar? i think its cool.
Topic by gmjhowe | last reply