Rifles

This forum is for Knex WW2 rifles!

Topic by dynno97   |  last reply


Knex Rifle

I need some recommendations for a low piece, well performing rifle to make.  I just cant find a good one.  I have already built the Sipriani rifle, and it took maybe 5/8 of my pieces without mods.  

Topic by KnexGuy15   |  last reply


Assault Rifle

Hey its me again! I have asked in the past what pistol would be good to shoot my 7 year old brother with. I built trauts side arm. I guess I wont shoot him though. I wanted to ask: What assault rifle would be the best for me to build. Here are my requirements: -Low Piece Ammount - No ball joints - Shoots white, blue or yellow rods - Can decrease power by subtracting rubber bands - Parts list??

Topic by Gamer5797   |  last reply


Knex Rifles

I am looking for great ideas on knex rifles. Barrels, triggers, mags, you name it.You will all get proper credit if I use your designs on Instructables. Please build. Look at The Jamalms Storm 223 rifle

Topic by Koolman2009   |  last reply


Assault Rifles

A forum about WW2 Assault Rifles...

Topic by dynno97   |  last reply


knex rifle?

Does anybody know of a good low piece high power knex rifle?

Question by ooocol22   |  last reply


knex rifle

This is just a message board asking wether i should put up my rifle

Topic by adamsdead   |  last reply


sniper rifle

I'm looking for a knex sniper rifle that has minamal pieces, decent range, a mag (preferably 5 shot) and has a true trigger

Topic by alfpwns   |  last reply


Knex Rifle

I was going to post this in another forum but the pictures on the comments didn't work so here it is. it has a true trigger with a sear, there is a small rod to pull back the firing pin under the carrying handle, the sear automatically locks into place and the mag is not detachable because of the amount it wobbles.the trigger housing is a little messy and i feel the front isn't as good as it could be so i just want some feedback on what you guys think about it and how i could improve it.

Topic by Loosewire; SOE Operative   |  last reply


knex rifle search

I am looking for a knex rifle or sniper rifle that has a low piece count and step by step instrutions.

Topic by squiddy412   |  last reply


knex sniper rifle

 what should I name this, and should I post instructions?

Topic by quaheezle   |  last reply


What is a "Loser rifle"? Answered

Recently, Ive seen people say their guns shoot "loser rounds", and some people have called their guns "loser rifles". Exactly what is a loser rifle, and what makes people say its a loser rifle? I personally havent seen any discussion on the subject, so yeah...

Question by DJ Radio   |  last reply


knex rifle upgrade

I moded the knex rifle to have a removeable bipod, scope, no broken peaces, thumb hole, and a true triger. i will put pictures in lator. should i post it as an instructable? update: just finshed making a sight, one of those knife things you can stick on the top of the gun, and a way to lode the bullet more like a rifle. but i cant fit the pictures in the froum lol.

Topic by dsman195276   |  last reply


knex assault rifle

This is my new assault rifle. I made two different types of magazines for it, a 12 round detacheble mag for white rods, and a 20 round detacheble mag for green rods. Should i make an instructable or not?

Topic by killer6   |  last reply


Sniper Rifle SR70A1

Https://www.instructables.com/id/Sniper-Rifle-SR70A1-Preview/ Check it out, it's under constant development so stay tuned for the next upgrade. Also, it's a "Ram-Transfer" rod system. Note K'nexecutioner 2.11's ammo belt for details.

Topic by prodo123   |  last reply


my sniper rifle

This is my knex sniper rifle it fires big ammo and its got long range and accuracy. p.s. probably wont post.

Topic by Ithaca37   |  last reply


Assault rifle contest!

The assault rifle competition winner will get a 5 star rating on any 5 instructables/forum topics/groups. (in that order, can mix). the 3 runners up will recieve a 5 star rating to an instructable of their choice.There will be categories, and everyone can vote for one gun in each category. i am only accepting assault rifles - must have a working mag, be the size of a rifle and fire.A voter may only vote up to two of their guns into any of the categories, and must vote something for every category. You may only vote onceCategoriesBest looking assault rifle1.Banana inventors 10 shot auto loading rifle2.-3.-Most innovative assault rifle1.Storm 2232.-3.-Most powerful assault rifle1.Storm 2232.-3.-Most reliable assault rifle1.The Burrito Master's Scar 11.012.-3.-Highest power:pieces ratio (ie. the more power per piece = better)1.Crestind's AST rifle2.-3.-Best overall assault rifle(cannot enter in this category, the guns with the top 3 ammounts of votes in any category will earn a place here)1.Storm 2232.Banana inventors 10 shot auto loading rifle/Crestind's AST rifle/Burrito's Scar 11.013.

Topic by The Jamalam   |  last reply


knex automatic rifle

I had an idea to make a new (i think) type of knex machine gun. it is like knexwizard's semi auto rifle but it has a single shot trigger from viccie.b's crossbow. i made it but it fired its whole magazine (20 grey connectors) in one shot! after modifiying it to put tonnes of friction on the wheel that holds the bands i got it to fire its mag in two shots- still not good enough. can anyone help me?

Topic by the VINdicator   |  last reply


Dutchj's assault rifle

This is my assault rifle. It was built with comfort being the top priority. It's already posted on KI, and if you want me to, I will post it here too. Specs are as follows: Comfortable stock, handle and foregrip. Strong, true trigger. Firing pin attached to a rail for stability. Removable magazine without pusher sticking out at the bottom Capacity: 15 Working sights.

Topic by Dutchj   |  last reply


Dutch's K'nex Rifle

This is my K'nex Rifle, based heavily on the M14 rifle. I'm only showing one picture here, the rest of them are on Knexinnovation. These are the specifications: Fake bolt-action ( pull pin back -> fire ) Removable magazine - Capacity: 9 Add-on rail for sniper scope ( inspired by Chombo ) or other add-ons Realistic look Average - Above average power Shoots blue rods

Topic by Dutchj   |  last reply


rifle knex gun

Here is my version of the klirk magnum i modded it so it could hold more power it has a mag and every bit good knex builder dont need a instructable i know it doesnt has a shoulder piece but it doesnt need it please coment need to make it better and can anyone tell me what the hell a true trigger is couse i cant figure it out made my own versoin of a trigger and it works realy well you can put as mutch rubberbands on it as you want couse it wont bend or break thats what i like about it

Topic by T3453R   |  last reply


Sipriani Rifle V1

Sadly, I don't have enough green rod to build V2 (or do I?). BUt I already saw that Statified( IF thats wrong let me know I can't spell worth ****) had done a review on the V2 so I made V1 and wanted to Review it. Over all I think this rifle if an extrodinary rifle and awesome looking. Power : 10/10 Accuracy: 10/10 Strength: 9/10 might break Reliability: 10/10 Looks: 9/10 If you think otherwise, my minion will get you

Topic by alfpwns   |  last reply


Knex sniper rifle

I have a partially completed sniper at home and i wanted to know if you guys want me to finish and post it, i mean, theres no point posting if it gets a cr*p reception, eh? And it is currently unnamed so i am open to suggestions about that aswell. At the moment it has a cool carrying strap (not mine), a bolt loading system (classic) a bipod, a monopod, and a nifty scope (not mine) I am also working on a new mech for possible semi auto, ill get back to you if it gets anywhere.

Topic by jellybean10122   |  last reply


G33 Assault Rifle

This is an old gun I was about to take apart to make my M4, but I thought maybe someone wanted to make this. If I get enough positive feedback and enough people ask me to make instructions, I will. It features: Non-removable 10+ shot magazine New-Style Floating trigger mechanism/string (ask for details) foward handle(optional) stock (crap, but could always be modded) Specs: Range 60 feet Accuracy: Up to 25 feet Reliability: Medium/High (never jams) Modifiable: Yes If I do eventually post this gun, I will also post the other interchangeable parts (actual magnifying scope, longer barrel, telescoping stock) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ EDIT: I destroyed the gun but it is probably easy to make from the pictures if you want, and if you still need any help, you can ask me.

Topic by flames10391   |  last reply


The Racker Rifle 2013

So I decided I didn't like my Racker Rifle that much anymore.  Mostly because it had one or two broken parts.  So I took TheDunkis's idea that he pitched to me on the original ible of using hinges for an even stronger trigger.  Turns out I could fit the new trigger mechanism in perfectly into the old gun body, so the gun from the outside looks almost unchanged.  The good thing though is that the trigger no longer uses a broken part and it is even stronger. The other change is that it has a modified SwagBoss handle on it for the ramrod, but I've had that on their for a while.  Thanks to The Foofinator. The internal picture is like 95% right, I tweaked one or two things after I took that picture before I put the whole thing together.

Topic by TheRacker   |  last reply


K'nex sniper rifles

This forum is for K'nex sniper rifles that look good, can shoot atleast 50 ft, and are accurate.

Topic by Smasher555   |  last reply


Knex Oodammo Rifle

Hey Guys, I really wanna make a oodammo rifle but i cant get an cool shape for it.  Maybe 1 of you have one? pls send me

Topic by Red-Dragon 


Any recommended rifles?

Aby rifles out there that are realistic, powerful and has a good range with few or minimal pieces and has some cool features e.g. Removable mags, bolt/pump/lever/break action, near frictionless barrels, cool loading action if not removable mag, horizontal mag etc.

Question by I.E.   |  last reply


The Adaptive Knex Rifle

I almost sold all 35+ pounds worth of Knex, but am glad I didn't. I have resurrected my old mag fed design and will be posting it here on Instructables.

Topic by MrRadicalEd   |  last reply


K'nex Haas Rifle

A little sneak-peek of my sniper rifle to come. :) It is difficult to operate, as it was built for an extreme emphasis on range/power and nothing else.It can use fin-stabilized dart rods IE KillerK sniper rounds.When I have the spare time, I'll run tests to see how much range I can get it to go, how accurate it really is, etc. In the first picture, it is unloaded and not cocked.In the second picture, it is ready to fire a red rod full-power.In the third picture, same as second but closer view of the mechanics.

Topic by Perfect Duck   |  last reply


Knex Sniper Rifle

Hi, im new to Instructables, and i havent found a good looking sniper i can build :s i got around 95 yellow connectors, 10 blue spacers, and 6 grey spacers (ouch!) and i got no misc. pieces only some tan connectors and the black/blue moveable thins (idk the name) so if you can help me finding a nice looking sniper rifle (range doesn't matter) please let me now :) ps. sorry for my bad English, it aint my native language

Topic by iColourStuff 


Prototype Rifle (updated!)

This is the design for my new knex gun. I might not post it because it is just a replacement for the MH297(my old gun). I was going to post it but my computer crashed and I lost all my photos. I had already taken the gun apart because I was working on my shotgun (I might post). P.S. New avatar!

Topic by Mintyhippo   |  last reply


Knex sniper rifle

HI. This is my new knex sniper rifle that i made. Here are some features. 1 the ram dosent fall out, the ram dosent stick out of the gun, begging true trigger, fires yellow rods, powerful, sturdy desine for minimum breaking, recoil is in the mid to balance it out, detachable tripod or bipod, and its longer than my paint ball gun. Here are some pics, if you like go to dannys fourum topic and vote on it.here is the pic order.1 as you can see this sniper is longer than my paintball gun2 Hahahahahah i got more knex than yoooouuuu!!! =P3 this is the trigger mechinisum when its not pulled. 4 Sorry for the blurry pic but this is the trigger when pulled.5 looking at the stock of the gun.6 The front7 The chamber where you put the rods in8 a last look at the trigger mech.9 the whole gun. Beuty eh?I hope you like this, dont forget to vote on this in dannys fourum.

Topic by knex hater hater   |  last reply


Knex Sniper Rifle

A mod of the DSMan Crossbow it has a range of about 75 feet, and its accurate up to about 50, although I haven't tested it since I put on new bands, should I post?

Topic by ShadowChaosControl   |  last reply


My new knex rifle (edit:) BATTLE RIFLE

I took my bolt action knex rifle, which is one of my favorite guns and up graded it. First i made the magazine better, then i added a stock, frame, true trigger, more authentic bolt action thingy, and a MUCH better handlepic1-overviewpic2-new magazinepic3-new guide rails for pin=much less frictionI am going to convert it to look more like the battle rifle form halo :)edit 2/3/08i have finish my new rifle, it looks very simmlar to the halo battle riflei will have a picture soonedit 2/4/08i got some pictures of my updated gunedit 2\16\08i made a new scope, it works well, like really well, more of a sniper scopeit makes you look down a little to see through, because knex guns' bullets go towards the ground sooner than real guns'ill post a picture of the new scope soon

Topic by ashchetm   |  last reply



dos youngcookieboys break action rifle have any good mods?

I need mods for the rifle because i want to improve its acuracy

Question by callumlewin   |  last reply


Oodammo rifle met magazijn?!

''Mijn rifle'' Het is de Tr18 zonder turret. Ik heb geprobeerd hier een magazijn op te zetten, maar ik faalde... Nu is de vraag aan jullie: Kan iemand dat proberen?

Topic by sak-j   |  last reply


new knex sniper rifle

Https://www.instructables.com/id/Pakmans_Sniper_Rifle/check it out!

Topic by pakman227   |  last reply


Knex sniper rifle contest

Ok guys you've got to make a sniper or just a rifle you can enter an already made gun so a sniper rifle or just a rifle!! you win: 5* on all your ibles and a subscription and i will also advertise your stuff for a week! the deadline is: 30th april same as someones micro gun contest HOPE  U ENTER UR SNIPER (RIFLES)

Topic by MegaMetal8   |  last reply


Best knex assault rifle

What is the best all around knex assualt rifle? I only have enough peices to make a Z35, so I need a gun with around that peice count.

Topic by rec0n   |  last reply


working knex battle rifle

I have been working on a battle rifle from halo. This forum is just to show you some pictures. If you want to see more go to my original forum.

Topic by ashchetm   |  last reply


New Assault Rifle will not be posted.

My new assault rifle, seen as a slideshow, will not be posted. I have plans to make it a lot better. Currently, I rather dislike it's looks and I plan to remodel and make a new a version of it. If that version is sufficient, I will post the new version.

Topic by Raikou-san   |  last reply



Bartboys Barrage of Sniper Rifles.

I have made 5 different sniper rifles, and one rifle that uses less pieces, and is ready to add an electric remote control thingy. They all have good rage and power. Please vote on Favourite.

Topic by Bartboy   |  last reply


Knex halo sniper rifle? Answered

Hey everyone  I'm currently working on the sniper rifle from halo reach and was wondering if i posted instructions if anybody would be intrested in building it because I dont want to post for nothing. It will be mag fed, fires yellow rods, and decenly big but not too big. It is also realistic too.

Question by KnexFreak360   |  last reply


Semi-Auto Knex Rifle.

I've been working on this gun a long time while bouncing ideas off Mepain. It's a TRUE semi-auto in the fact that all you need to fire a shot is to put the piece in the gun and pull the trigger. I was able to unload a full magazine in less than 10 seconds. I'm a lot more likely to post instructions on this gun than the last two, because this gun works so nicely.Holds 13 shots.Shoots up to 40 feet.Shoots grey connectors.

Topic by oodalumps   |  last reply


Knex Concept : True rifle

This is something I made when I was trying to make a K'nex rod spin in flight. I know there are true rifles like the Tempest, which uses a oodammo, and I know someone else twisted a rod to make it spin. This thing should be able to shoot normal K'nex rods with no modifications. I just built this, but I didn't make it into an entire gun. The red rod in the pictures is the ammo. This uses a K'nex wind up motor to spin the ammo. When you stick the ammo into the motor, it is like a bullet lock. The thing in the third picture is like a ratchet. It keeps the rod from spinning. It would have to be connected to the trigger, so it lets the bullet spin just when the ram hits it. Someone else could make a gun with this idea, but please give me credit for the idea.

Topic by ~KnexBuild~   |  last reply


Z35 Assault Rifle Review

Ok so I built the Z35 assault rifle to day and I thought why not make a review for it. Link-https://www.instructables.com/id/Z35-Knex-Assault-Rifle/ -Comfort 6/10(the handle was really flimsy) -Range 9/10(I got around 65-70 ft flat with 2 strands of 32's tied together) -Power 8/10(when I shot my hand it really didn't hurt to much) -Accuracy 8/10(the gun is kinda accurate) -Reliability 9/10(the gun is really reliable) -Body Weight/Balance 8/10(the gun is kinda heavy it helps if you include the carrying strap) -Magazine 9/10(never jammed for me) So I would recommend this to anyone who wanted a blue rod mag fed gun or just an assault rifle.=)

Topic by bigdylan91   |  last reply


Bakenbitzes Knex Assault Rifle

This is my newest gun, my assault rifle. It shoots dark gray connectors with Y connectors on them. It has good range and power. I might post.EDIT: The gun is now posted https://www.instructables.com/id/Bakenbitzes-Assault-Rifle/

Topic by bakenbitz   |  last reply