I am wondering if I got a good deal. I bought a 2.5x 32mm hunting scope for $5. Also what mounts do I need to attach it to a standard airsoft R.I.S. rail system?
Question by thing 2 | last reply
I made the scope using knex and duct tape ok maybe i bought it at Walmart for $8.98 two years ago (Daisy 4x BB) but the point is that that there knex gun is pimped out (its killerks magnum or whatever, only cause it was on hand at the time) I hope to god that no one needs an instuctable for this...
Topic by sethex | last reply
I am looking for a scope for my paintball gun and I need some help. My gun is called the MR-1 and was manufactured by Spyder. I have an 18 inch and a 21 inch barrel for sniping but I need a good scope now. The scope should be 30 USD or under that uses a dovetail mount. Thanks in advance for the help.
Topic by Pat Sowers | last reply
Hi guys, i have been playing ace of spades a computer download game. i wasmodding my sniper rifle when i came across this pic. i was wondering if anyone could make this scope in gimp and please make sure the background is transparent for shooting. thanks. heres the pic.
Question by shadow wave rider | last reply
Just got a new airsoft sniper, and need help figuering out how to zero scope
Question by brickman93 | last reply
Some of you have probably seen my other 2 OLD forum topics, but if you haven't, I will explain it to you here. I have been having BAD throat problems for a few months now. Since I was about 9 I had food getting stuck in my throat. So one day, I was eating lunch, and food got stuck, slid down my throat and into my wind pipe. I started choking and couldn't breath. After that dramatic incident, I noticed a new symptom. I physically could not swallow. And on top of that I had an old symptom: heartburn. So I go to a doctor. He says I would have to get a scope. So THIS is where the update begins. It was early September. I go in to get a scope. I wake up with the memory spam of a goldfish. So my family and I wait a while to go to the doctor for the results. So I go to my appointment where my doctor explains what is going on. ALL THE WAY DOWN my throat I have ulcers. Thus, around my ulcers they swell up, causing the difficulty swallowing There are these things that MOST (not all) people have called esophills. I cannot find any info on these things so I will explain them to you instead of a link. These "esophills" are basically cells in your throat that react to allergies. They could swell up, itch, burn, etc. Well, mine swell up. The average person has about 5. I have 21. After explaining these things, my doctor says I have Eosinophilic Esophogitis (http://en.wikipedia.org/wiki/Eosinophilic_esophagitis) and says I have to get an allergy test. Pardon my french in this paragraph....I go to see an allergist. He says to wait in the room for a few minutes until this hot girl comes in. She takes these blue pointy things and pricks me with them as liquid comes out. So she walks away, and we wait. 2 of the pricks start itching like hell. The doctor comes in, and says those two pricks are samples of corn and apples. Apples? No biggy. Corn? Damn...........why is that bad? Things that have corn that I was banned from: Soda, chips, pretzels, cereal, cereal bars, bread, and hell of a lot of other things. So I don't eat ANYTHING with corn for about a week until the blood test results come in. About a week after the allergist appointment, he calls and says corn and apples came out negative. So I could go back to eating things with corn. Tomorrow (10/4) I have to go get ANOTHER allergy test by taping food to my back. Hungary? Just rip the food off my back. Thanks for reading! C'ya will I go cry in a corner /sarcasm
Topic by Flumpkins | last reply
I am looking to buy a red dot scope, nothing too pricey, but nothing too crappy either. I am buying it off of amazon along with my vest, and i am stuck between 2. the first one is a barska on the following link: http://www.amazon.com/Barska-Short-Tube-Gun-Sight/dp/B002QEXJH4/ref=sr_1_236?s=sporting-goods&ie;=UTF8&qid;=1286397649&sr;=1-236 the other one is also a barska, and is on this link: http://www.amazon.com/BARSKA-Red-Dot-42mm-Riflescope/dp/B001JJCHY8/ref=pd_ybh_10?pf_rd_p=280800601&pf;_rd_s=center-2&pf;_rd_t=1501&pf;_rd_i=ybh&pf;_rd_m=ATVPDKIKX0DER&pf;_rd_r=0EQE4AP7X4QRM4CRR1SF If you could look at both and help me chose, or suggest another red dot scope between $30 - 40. If you own either of them, please tell me what you think of it. If possible, i would like to know if either of them need a riser mount to clear the m4 front sights
Question by predatory meatball | last reply
Hey! i'm back with the V2! Okay, this gun fixes all the problems of V1 like: It know has a mag for the pump action part (that shoots 2 blue rods at a time!) the turret doesn't fall off any more looks cleaner it's got a scope and better sights uses quite a few less pieces (not that different more comfy trigger for all three guns are a lot more reliable So, i might be posting, depending on what you guys think, and i need a name for it! Happy seleziona day!
Topic by Seleziona | last reply
I have an Airsoft smith and Wesson m3000 shotgun (355 fps) and need a sight for wars but will the scope fit on the shotguns rail? there is a pic of the gun if you click on the other picture at the bottom
Question by Airsoft 007 Sniper | last reply
Well, Hello. This is my new assault rifle. I made this in about 3 hours. It turned out much much better than I expected. It shoots about 40ft but it has a very good strong trigger so maybe 50ft. The trigger block in the barrel works like the way Pooplord's Lever action pistol does. It requires no cut pieces although, my one has some on it. The mag is removable but its a little bit hard to do so. I might post it, might not. Sorry for the bad(ish) picture but I was using my phone. Adiós Amigos.
Topic by Millawi Legend | last reply
I took my bolt action knex rifle, which is one of my favorite guns and up graded it. First i made the magazine better, then i added a stock, frame, true trigger, more authentic bolt action thingy, and a MUCH better handlepic1-overviewpic2-new magazinepic3-new guide rails for pin=much less frictionI am going to convert it to look more like the battle rifle form halo :)edit 2/3/08i have finish my new rifle, it looks very simmlar to the halo battle riflei will have a picture soonedit 2/4/08i got some pictures of my updated gunedit 2\16\08i made a new scope, it works well, like really well, more of a sniper scopeit makes you look down a little to see through, because knex guns' bullets go towards the ground sooner than real guns'ill post a picture of the new scope soon
Topic by ashchetm | last reply
Ok, so I made some mods to my AR-4 v3. There are 3 major mods, a couple of other minor cosmetic mods, and one performance mod. Picture 2- minor stock mod. This mod allows people to extend their stocks to make it longer. Picture 3- New hopper based off of Killerboy's removable mags. Major mod. By using his hopper as a fixed mag, It now allows me to hold 9 yellow rods, which is pretty big. It does jam, but rarely. The rounds will all stay in the hopper if you vigorously shake it, and you can remove the rounds pretty easily. Picture 4- Minor trigger mod. All it is is replacing the hinge with 2 Y connectors, a white rod, and a purple one slot connector. Picture 5- Scope mod. This connects the scope to the top of the gun, making it a better hand grip for carrying. Picture 6- Yet another scope mod. This mod was made to adapt to the new fake barrel, which was filled up instead of only the middle row having the orange connectors. Picture 7- Mod to the bottom of the gun. The last one was just having blue rods, this one fills it up with connectors. Picture 8- Foregrip mod. This is the second of the 3 major mods. I did away with the bipod and modded the bottom to have a new grip. Mainly a comfort mod. Picture 9- Barrel mod. The last major mod. This mod was made after several people noted that the ammo needed some 'Help' to get into the barrel. I basically just filled in the hollow area where the ammo would jump from the hopper to the barrel, so you dont have to stick your finger in. Picture taken from top of gun. That stuff above it is what you connect the scope to.
Topic by DJ Radio | last reply
I want to upgrade my Elite Force 1911 into a modern race gun, and I wanted to know if TM upgrade parts such as rail mounts and grips can fit on it. Thanks!
Question by zack attack | last reply
I need a good underbarrel mini-grenade launcher, red dot sight, and scope. a good handgrip would be nice too.
Question by mushroomhunter | last reply
I moded the knex rifle to have a removeable bipod, scope, no broken peaces, thumb hole, and a true triger. i will put pictures in lator. should i post it as an instructable? update: just finshed making a sight, one of those knife things you can stick on the top of the gun, and a way to lode the bullet more like a rifle. but i cant fit the pictures in the froum lol.
Topic by dsman195276 | last reply
Cool-looking scope Hopefully multiple round loading system Easy to load and fire Has easy-to-follow instructions on Instructables or some other way Very good accuracy Ammo won't slide out of the barrel if i point it down a staircase to shoot someone extremely powerful or just powerfull needs good range
Question by lynx66 | last reply
This is my K'nex Rifle, based heavily on the M14 rifle. I'm only showing one picture here, the rest of them are on Knexinnovation. These are the specifications: Fake bolt-action ( pull pin back -> fire ) Removable magazine - Capacity: 9 Add-on rail for sniper scope ( inspired by Chombo ) or other add-ons Realistic look Average - Above average power Shoots blue rods
Topic by Dutchj | last reply
Hey there! This is my review of the Sipriani Rifle V3.0 (FT210).First, lets start with physical appearance.Strength - 8.0. Pretty sturdy.Stock - 8.0. This stock is good, but personally I like the V2's stock better. Handle - 8.0 Pretty good handle, the blue rods dig into your hand though.Scope - 8.0. Nothing new, but it gives you an idea of where the bullet's going.Overall, 8.0Now, for performance.Range - 10.0. This things shoots far. With wings, even farther.Accuracy - 9.0 The long barrel makes it very accurate. Even more with wingsEase of firing - 6.0 It's pretty hard to load this, to be honest. You have to pull back the rubber bands a very long distance, have to clip off half the scope, then put the bullet on. By the way - I was using 2 #64 rubber bands.Fun to shoot with - 9.0 Defiantly one of my most favorite guns I've ever built.Overall - 8.5Final Score - 8.3 Man, I feel like I underrated this. This is a very good gun. I would recommend this to anyone.If my calculations are incorrect, please correct me! Thanks for reading this review! - Owen-mon-82397
Topic by Owenmon | last reply
I got around to trying out one of dj raidos gunsso i tryed the SR commado v1What to expect:Strength:9/10very strong (but there are weak parts) but mostly strongRange:8/10 good sive and ok range i get 20 ft with easeLooks:9/10i think it looks very werid (but yet ausome) and also kinda looks like a future weponParts:7/10 like most of his guns are pretty low peiceHandle: 7/10 the real handle is kinda small (but i use it more as a grip)Stock:8/10 very sturdy and strong(rock solid)Barrel:8/10 a decent barrel but it can only take sow much powerFake barrel:9/10 very sturdy and good sizeadd onsBipod:7/10 not the best (but he made a low peice bipod )scope:6/10 you really can use the scopeIn the end:fatamizama morguiam!=(totaly ausomes)To finish it up: a very good gun and i would recomed it to every bodythank you for reading my frist review knex sbf(and also thanks to dj raido)(i would give you a link but my pc wont let me)
Topic by knexsuperbuilderfreak | last reply
I like airsoft and I also like looking at guns on amazon. Each time I look at a cool airsoft gun there's always sweet add-ons (grenade launchers, scopes, lasers...) and when I look it up on amazon, I can't find any good ones for a reasonable price. Where can I find some ?
Question by Quest for Questions | last reply
I have a partially completed sniper at home and i wanted to know if you guys want me to finish and post it, i mean, theres no point posting if it gets a cr*p reception, eh? And it is currently unnamed so i am open to suggestions about that aswell. At the moment it has a cool carrying strap (not mine), a bolt loading system (classic) a bipod, a monopod, and a nifty scope (not mine) I am also working on a new mech for possible semi auto, ill get back to you if it gets anywhere.
Topic by jellybean10122 | last reply
This is the L96, basically KILLERK's magnum on steroids. I have not tested range yet, because the trigger system still has a few kinks in it. Below are some pictures, most are my knex gun, but one is of the real steel AI AE, the same as an L96, but shorter and cheaper. Can you guess which one is of the actual AE? Correct! It is the second one!!! Some features of this gun are the cheek rest, and the real scope that you can mount to the gun. It also has a removable bi-pod. The gun weighs exactly 60oz (3 and 3/4 lb, if you are not a math wiz) without the scope, but with the bi-pod. Another feature is that all of the moving parts are in the front (except for the trigger, but that is on the outside so it doesn't matter), so you can design different bodies, if you don't have enough pieces. Also, the body doesn't have to be solid, it can be hollow to reduce weight or piece count. I got the picture of the Accuracy International AE from here, and the picture of the M24 from here (yes, it is in ÃÂ ÃÂÃÂ¾Ãâ€˜ÃÂÃâ€˜ÃÂÃÂÃÂ¸Ãâ€˜ÃÂ).UPDATE- I added some things to the message bodyIT HAS BEEN POSTED IT HAS BEEN POSTED IT HAS BEEN POSTED IT HAS ohh, that's probably enough now.
Topic by Whaleman | last reply
This is killer~safecrackers T.B.U.A.R review. comfort: 8/10 - comfy handle, but it could have a stock. power: 8/10 - its quite powerful. looks: 7/10 - it looks ok, it could be better tho. innovation: 9/10 - its small and compact and has a scope. accuracy: 7/10 - ok accuracy. piece usage: 8/10 - it doesnt use much pieces. stenght: 10/10 - very sturdy. reliabilty: 9/10 - bullet always leaves the barrel and a great trigger. overall: 66/80 - good gun from killer~safecracker. its worth a build!
Topic by ~KGB~ | last reply
About time I made an M4 carbine. The farthest shooting/accurate and sturdiest gun i've made to date mostly due to the muzzle loading. WHAT!!! NO MAGAZINE!!! yep, it was abandoned due to horrible range and often jams. It's more of a sniper than an assault rifle and is extremely accurate with a grey rod + grey connector. It uses a modded dsmans barrel for maximum accuracy and distance, accuracy due to the barrel going through the forgrip. I also added a 4-railed foregrip for attachments such as virtical foregrip (shown in pic), bipod, dot scope, lights/lasers, or anything that can attach. Tell me what you guys think.
Topic by Trauts | last reply
Some of you may already know that ive started to upgrade my airsoft M14. so far, ive bought a scope, a rail, a bipod, a sling, and 2 spare magazines. ive also bought some other airsoft equipment, and i just have a bit more to buy then i can start airsofting. ive spent roughly €500 on all of the equipment and im happy with what ive bought so far. for more pictures go to "My airsoft M14" instructable. im also working on bringing my account back to life, as in posting more things, such as airsoft instructables. tell me what you think!
Topic by ~KGB~ | last reply
-----Cool-looking scope -----Hopefully mag- or clip-fed or some other kind of multiple round loading system -----Easy to load and fire -----Has easy-to-follow instructions on Instructables OR Youtube OR Knexinnovation -----Won't use too many pieces and stop me from also building a semi-automatic gun. -----Very good accuracy -----Ammo won't slide out of the barrel if i point it down a staircase to shoot someone -----Has a handle to carry it?
Question by zchan1120 | last reply
I just have a ton of blues rod and yellow connectors, and I wanna find a gun suitable for them. Id like it to fire rods, have a mag, be semi or auto, have a good range, have an optional scope, and be somewhat sturdy I have a ton of white rods, about 100 green rods, so I am okay in that aspect. I just havent found many semis that dont use whites connectors, or guns that use many blues at all.
Question by minime12358 | last reply
This is a knex video camera holder I threw together in like 5 minutes. The original one failed and also used too many parts. This camera can be either used with a quad pod, or be mounted on most 5 layer thick knex guns with addons. The camera is easy to put in and take out, but when its in, you can't make it fall out. Surprisingly, it's very sturdy, and can be used as an FPS view in a knex war and an alternate scope. I was gonna add yellow rods into the midsection like I did with the sides, but I ran out of red connectors, so I couldn't. Just pretend they are there.
Topic by DJ Radio | last reply
Some guy thought he could make a video of my Longbow V2 and get away with taking credit for it since he's so low profile on the internet. This guy obviously couldn't even do it right since he messed up on a bunch of parts, most notably the barrel. Here's his video, posted nearly 1 year after I posted my crossbow: www.youtube.com/watch I've flagged the video for Copyright infringement. If you're wondering how I found it, I was surfing through Youtube and browsing through all the knex guns to laugh at the designs, when I saw a thumbnail of a stock and scope that was familiar to me somewhat. EDIT: He gave up and gave me credit. You can stop the hate now.
Topic by DJ Radio | last reply
Hey everyone, I know it been a long, LONG, freakin time that I've been inactive. I have not posted any guns since the beginning of August 2012, but now I almost finished making a sniper concept. It is called the XPR 50, which is supposed to be a semi auto sniper featured in Call of Duty: Black Ops 2. This isn't a real gun now, and there aren't any pictures of it in real life. I made the sniper from the picture in the black ops 2 game, which is in a really bad angle, with some parts of the gun distorted. I worked my butt off to make this, and this will be the first knex gun based on black ops 2. I didn't make the mag and the scope yet, so DON'T MENTION ABOUT IT!!!!!!
Topic by CODawesome | last reply
Well, I just finished my PSG-1. Out of nowhere!!!! YEAH! It is full-sized, but the stock is a piece of shi*. I tried my best to copy the Hensoldt 6x42 on the top, but, it's okay. It is converted from Trauts' G36C. It does NOT fire. : ( Pics will be coming soon. EDIT: The gun is now doing what it does best, looking damn fine in my display case. I will be establishing a release date of January 20th. A pic will probably be put up on New Year's day. DOUBLE EDIT: It can be converted into a G3, EASILY. Take off the scope. TRIPLE EDIT: Pics will be up in a couple hours. QUADRUPLE EDIT: I can't get instructions. If you built it, by all means, post it.
Topic by DrWeird117 | last reply
Hello everyone I would like to tell you about my new weapon system. That uses a easy load mag like Ironman69's. It will come in 4 slightly different versions that will include. The standard version that will have a full stock, hand grip, and iron sights. Then there is the para-trooper version that will have a twiggy stock and will be a little smaller and it will have vertical fore grip and iron sights just like the standard version. Then there will be compact version that will just have a shorter barrel than the para-trooper. Then there is a special forces edition that will have a mock silencer, a longer fore grip with side rails for flash lights and laser pens,and will come with a mock scope. At the moment I do not have a date of release.
Topic by knexfan9182 | last reply
This is an old gun I was about to take apart to make my M4, but I thought maybe someone wanted to make this. If I get enough positive feedback and enough people ask me to make instructions, I will. It features: Non-removable 10+ shot magazine New-Style Floating trigger mechanism/string (ask for details) foward handle(optional) stock (crap, but could always be modded) Specs: Range 60 feet Accuracy: Up to 25 feet Reliability: Medium/High (never jams) Modifiable: Yes If I do eventually post this gun, I will also post the other interchangeable parts (actual magnifying scope, longer barrel, telescoping stock) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ EDIT: I destroyed the gun but it is probably easy to make from the pictures if you want, and if you still need any help, you can ask me.
Topic by flames10391 | last reply
Oh and if you want another challenge visit my recent challenge to make an M1 Garand : www.instructables.com/community/Knex-M1-Garand-or-the-lack-of-them-/ Now, I was wondering if anyone could make a gun that looked like Hans Solo's DL44 Blaster.If you look it should be quite simple. You could use bakenbitz's BBKWG (www.instructables.com/id/BBKWG) as a starting point. Pic 1. The DL44 Pic 2. The DL44 (side view) Pic 3. The Mauser C96 on ehich it was based. I don't know about you but I really like this gun. With it's only competition the Colt .45 1911, this was the earliest coventional pistol. Pic 4. The hero himself, Hans Solo (with DL44) As the magazine is in front, you should'nt have much of a problem. I don't mind if it doe's or does'nt have the scope. So... Any takers?
Topic by MI6 | last reply
Hey guys! Well, here is my most recent replica, the M14 (T44). It is, by far, one of my favorite rifle types, as is seen by that fact that it is my third attempt at this rifle type (M14/M21). This gun turned out better than I had expected... even though it was originally intended to be a M21. I am still working on the conversion process, but as it stand now, it is a M14/T44. With its 20 rd. magazine, sturdy body and stock, nice sight set, and improved stock, this thing is probably one of my best guns, when it comes to my replicas at least. Features: It looks just like a M14/T44 Good range: 40 - 70 ft. Magazine lock included Sturdy body and stock Large capacity magazine (if you use rods) 20 -30 Really comfortable Great pin-pull Can be easily modded into a M21, just slap a scope on it Enjoy, and tell me what you think. -The Red Book of Westmarch
Topic by The Red Book of Westmarch | last reply
Since everyone likes the TR so much and people are making custom TR's, I decided to have a "Rate a TR" thread. Other sites have similar threads, like SSCoasters. The basis is that you post a picture of your TR, and the next person to reply has to rate your TR on a scale of 1-5. Then he posts a picture of his custom TR, and the next person rates it and posts his TR, and so on. The more modded a TR seems, the higher rated it should be. To start the topic off, here is my custom TR. It uses Zak's stock because I like it so much, and it features original custom ironsights, and a neat trigger guard that attaches to the foregrip. I will probably post a video later. *Edit* since there seems to be some debate on mods, I will clarify what I meant: By "mods", I meant mods that make the gun better or increase efficiency in some way or form. So if you throw a bunch of random parts on your TR like a scope or a grenade launcher, it doesn't count towards my overall definition. *update*:
Topic by DJ Radio | last reply
It has been posted. Here is the link.UPDATEI added an extended barrel, because of The Jamalam's suggestion, and I weighed it and it is 1.6 Kilograms which equals ~ 3.5 pounds.UpdateI changed the mag and reinforced some parts.I have finally finished my awesome sniper. I have been planning this gun since June and started building about 2 weeks ago. It is the first of its kind. It uses a rail system like dsman195276's sniper but it has a mag. It has a lot of power and accuracy because of the low friction barrel made out of orange connectors and wheels. It has a trigger that I think is better than dsman's sniper trigger. It has a comfy handle that is like dsman's sniper handle. It has a comfy stock a very accurate and cool looking scope. It also has a sturdy bipod of my design and a comfy front hand grip. it is also easy to pull back the firing pin. the mag capacity is ~10. Mag reload time is ~8 seconds. Time to pull back firing pin and power transfer and fire is ~4 seconds. Here are some pictures.
Topic by jollex | last reply
Ever since I was a young lad (XD) I have wanted to learn whatever I could. How to clean a firearm, how to change the oil in a car, how to sight in a scope, how to string and fire a bow, the list goes on. An item included in that list is how to make a website. So, as many of you may know, I made a website (using Weebly), called The Red Book of Westmarch Insider. I decided to make this forum topic to let you guys know about some of the new stuff on the site. I have a couple of new polls, one Up to Date post, and a rather large Video Series page. I also have the ability to make a forums page, but I chose not to do that, as I was not sure as to: 1) how it would work, 2) whether or not you could post pictures, and 3) if anyone would be interested. I also made this forum topic so that I could let you guys know when I have something new on my site. You don't need to post any comments or anything, this forum topic is just to give you quick links to new posts and stuff on my site. -The Red Book of Westmarch
Topic by The Red Book of Westmarch | last reply
Here is the review for the AR-4 Commando v3 by DJ Radio.What to expect:Innovation: 10/10 Very innovative new rail system, and loading design. Strength: 9/10 He did a very good job of making it strong with the amount of pieces used.Range: 7/10 It is not much better than any other ram rod. But I got an average of about 20 feet.Looks: 8/10 I think it looks ok. It is by far his best looking gun.Parts: 9/10 uses about 1000 pieces. So I would call it low piece. Handle: 7/10 the handle is a little too small for me but it might work for others.Stock: 9/10 very sturdy Barrel: 8/10 Innovative. and it has a low friction barrel. Fake barrel: 7/10 bullets get stuck occasionally. Magazine: 7/10 new and innovative but jams occasionally Extras. Bipod:8/10 not the best but it holds up the gun.scope:8/10 It works good.At the end: I would give the gun 8/10.Here is the link to the gun. https://www.instructables.com/id/AR-4-Commando-v3/Thanks for reading.
Topic by Killer~SafeCracker | last reply
Posted!Do you think this gun makes the AR-4 v2 look like a noob's toy? plz answer!This is a new bolt-action knex assault rifle I made. It shoots Yellow rods. This gun is the first bolt action to my knowledge that doesnt use modded part.For those of you who dont think it is true bolt action, to shoot the gun, you have to pull the ram/bolt back, then push the bolt back while leaving the ram pulled back.STATS-Bolt-action-True trigger-includes bipod (foldable)-tight looks-includes scope-6 round hopper-30-40 foot range (one rubberband doubled up)-Safety (new)EDIT- I have put tape on the part of the bolt that pulls the firing pin back, and it gets an increased range. the tape straightens the parts that hold the bolt, decreasing friction.This started out as one of my failed projects, I made it before the jackal and showed it to ajleece and some others. The original one had a bottom loading removable mag, shot blue rods 5 feet. I took it apart to make my jackal, and then I got the idea to make it a true bolt action.I was not trying to compete with the ZKAR, I was just trying to make my AR-4 v3 work.Here is a video of me firing it on youtube:
Topic by DJ Radio | last reply
I'm drawing up some mental plans for a Sniper rifle. I posted some non-gun k'nex projects but they were never as popular as weaponry. I know there's a tonne of K'nex snipers out there already, but most of them underneath the body are just a basic gun with a blue rod mag, and a lot of the time the mag isn't actually removable. Of course there's nothing wrong with this, I myself have made guns with this setup. However, for my new Sniper, I want a removable mag with lesser-used ammo. I was thinking either orange-connector+grey connector ammo or yellow rods. Basically I wanted to see what the community wants the most, aside from Oodammo, because that's a tad awkward! Also any suggestions as to what else I should add to my Sniper? I was thinking: Removable Mag, breach loading single shot chamber, rails (like ironman's), detachable scope and Bipod, rear monopod, true trigger (of course), pin guides and maybe a section where a small pistol can fit, probably TheDunkis' flat pistol or r3con's (spelling?) mod for it. Oh and maybe a heartbeat sensor for all the MW2 fans out there XD -Lowney
Topic by Lowney | last reply