This message is to the dude who made the instructions for gorkems sniper easier how long is it going to take u to do the next steps? thanks super knex maker
Topic by Jarez Patel | last reply
Here is my sniper i made a week ago. just to clear, i took it apart so don't go on about me posting it. Pic 1: overall gun it was a total failure. it shot 20 feet and the mech ALWAYS broke. It once made a unearthly sound that was Like BOINY. Please comment on bottom.
Topic by NYPA | last reply
Um i have the knex big air ball tower and the thriller or something like that rollercoaster. im gonna make a gun cause i already have one pistol but i wanna know what gun can i make using those parts and how powerful. id like it to be a sniper but most of the snipers i dont think i have pieces for. dont worry about difficulty i can build anything (not to brag)
Question by blaster876 | last reply
This is a Knex Sniper my friend and I made. we combined many mechanisms, ideas, and concepts from other guns to create this one. We would like to know if we should POST instructions. It fires a bit farther then the original scar and the grenade launcher is quite powerful depending on the amount of rubberbands.We would like to Credit: Best knex from youtube, Rofo12 from youtube, Alingarhs from Instructables, Bruce911from Instructables, Mepain from Instructables, and if we forgot to mention you then pm us and we will add you to our list asap :) =) =)SO if you would like instructions for this awesome sniper/gun please comment!!!Stats:37.5 inches longGrenade Launcher shoot grenades 16 feet and lands at about 26.5 feet (this can be made farther just add more rubber bandsAny problems with this instructables please comment and ill be sure to respond asapGrenade Launcher shooting White rod (little one) can launch it about 24 ft and continues to idkWe haven't made the main firing test yets but will get the results in soonAlso if you have any ideas for a better name for this gun please tell usKnex sniper
Topic by KNEX BUILDING IS FUN | last reply
Hi, im new to Instructables, and i havent found a good looking sniper i can build :s i got around 95 yellow connectors, 10 blue spacers, and 6 grey spacers (ouch!) and i got no misc. pieces only some tan connectors and the black/blue moveable thins (idk the name) so if you can help me finding a nice looking sniper rifle (range doesn't matter) please let me now :) ps. sorry for my bad English, it aint my native language
Topic by iColourStuff
I need help pn steps 4 and above its to hard to follow from 4 and over it gets to complicated for me so im asking gorkem or anyone else to either help me by showing more clear instructions. p.s put gorems knex sniper help in the topic box if u want to reply
Topic by Jarez Patel | last reply
Here are the rules. The sniper must be your own and it must be rated over 3. They will be judged on range, pierceing, accuracy, and amount of pieces. I will need a judge or two for each. The winner will recieve 5* and will be on my Bect of Instructables 2008 instructable. If you want to enter post your sniper on the comment area.Enterants- DJ Radio's knex SPEC-9 sniper rifle T36 Long Range sniper by Darth Gecko Man Kakurito's DragonavJudges- Heat-Seeker Volenteer on the comments if you have a lot of pieces and free time to build.Range-Pierceing-Accuracy-Amount of Pieces (lower is better)-
Topic by Electroinnovation | last reply
I have a partially completed sniper at home and i wanted to know if you guys want me to finish and post it, i mean, theres no point posting if it gets a cr*p reception, eh? And it is currently unnamed so i am open to suggestions about that aswell. At the moment it has a cool carrying strap (not mine), a bolt loading system (classic) a bipod, a monopod, and a nifty scope (not mine) I am also working on a new mech for possible semi auto, ill get back to you if it gets anywhere.
Topic by jellybean10122 | last reply
Hi there :D Im working on a new knex sniper. It will be an A(ccuracy) I(nternational) A(rctic) W(arfare) L96....i like it because its in WarRock and this sniper pwnz is that game :D it will be bolt action with a true trigger, sad enough untdetachble mag but maybe in the future i make it detacheble. It shoots yellow rods. I also could use red ones but if i used red rods the mag would be to big and unstable and i didnt like that. I have 1 pic of the original L96 and 1 of my gun so far. Hope you like it!!!!
Topic by chombo | last reply
I'm drawing up some mental plans for a Sniper rifle. I posted some non-gun k'nex projects but they were never as popular as weaponry. I know there's a tonne of K'nex snipers out there already, but most of them underneath the body are just a basic gun with a blue rod mag, and a lot of the time the mag isn't actually removable. Of course there's nothing wrong with this, I myself have made guns with this setup. However, for my new Sniper, I want a removable mag with lesser-used ammo. I was thinking either orange-connector+grey connector ammo or yellow rods. Basically I wanted to see what the community wants the most, aside from Oodammo, because that's a tad awkward! Also any suggestions as to what else I should add to my Sniper? I was thinking: Removable Mag, breach loading single shot chamber, rails (like ironman's), detachable scope and Bipod, rear monopod, true trigger (of course), pin guides and maybe a section where a small pistol can fit, probably TheDunkis' flat pistol or r3con's (spelling?) mod for it. Oh and maybe a heartbeat sensor for all the MW2 fans out there XD -Lowney
Topic by Lowney | last reply
HI. This is my new knex sniper rifle that i made. Here are some features. 1 the ram dosent fall out, the ram dosent stick out of the gun, begging true trigger, fires yellow rods, powerful, sturdy desine for minimum breaking, recoil is in the mid to balance it out, detachable tripod or bipod, and its longer than my paint ball gun. Here are some pics, if you like go to dannys fourum topic and vote on it.here is the pic order.1 as you can see this sniper is longer than my paintball gun2 Hahahahahah i got more knex than yoooouuuu!!! =P3 this is the trigger mechinisum when its not pulled. 4 Sorry for the blurry pic but this is the trigger when pulled.5 looking at the stock of the gun.6 The front7 The chamber where you put the rods in8 a last look at the trigger mech.9 the whole gun. Beuty eh?I hope you like this, dont forget to vote on this in dannys fourum.
Topic by knex hater hater | last reply
I am 13 and am interested in being a sniper. But I have glasses!
Question by titanvince16 | last reply
Hey everyone I'm currently working on the sniper rifle from halo reach and was wondering if i posted instructions if anybody would be intrested in building it because I dont want to post for nothing. It will be mag fed, fires yellow rods, and decenly big but not too big. It is also realistic too.
Question by KnexFreak360 | last reply
I've decided to take DSman's advice and make a beter rifle. It will feature: 1. a better barrell 2. True Trigger 3.Fuller Stock 4.No Cage Sadly, I dont have enough green rods to make both my sidearm and new rifle(w/ a better barrel), so i might make it using MLCAD. Range: I got 38Ft. Con: Single shot
Topic by alfpwns | last reply
Well, a few people knew about this, and I finally got around to putting up some pics. It has a new-ish handle that is really simple yet comfy, a new-ish handgrip that is simple yet comfy, a new-ish barrel that is out of the norm, a removable red rod mag, nine connectors of friction and a full black rod of ram pullback, a true trigger(duh), and a swinging bipod that attatches to the barrel when not in use. That's it for the pros. Now, it's rather bulky, it has so-so power(though I never really went for that), the barrel is sorta flimsy(workin on that), the trigger tends to not take too much pressure(workin on that), and the stock is wierd lookin. That's it for the cons. Yes, yes,yes,yes I know my camera is crappy....it's too bright in all lighting.... Ironically, I finished this two days before school starts, so I don't know when I'd be able to post it, if I intended to...but say your thoughts on it anyway.... Oh, and by the way, if you fell like leaving a random or off topic comment, I'm no Nazi *cough*TheDunkis*cough*.... I got to type this all over again, because it would seem that the first time, the pictures wouldn't upload.... If you need more pics of it, let meh know! Also, just to let you guys know, I had two options: 1- let this thing have more jams than a Smuckers factory, or 2- make it so it cant jam, but you have to lightly tap the pusher for it to shoot. I went with the latter, so it adds like one second to the firing rate....
Topic by apples!!!!! | last reply
K'Nex sniper rifle contest!!!the first contest for this group. this contest is not intended to give people time to make a sniper rifle now, but already have a sniper rifle made AND posted. all you have to do to enter is to put your instructable in the group. this saturday i will make another forum with a list of the entrants. then the voting will begin. so to enter you1. have to have a sniper rifle2. have a insructable for it.thats it.3. it has to be made out of knex only, they can be modified as broken but not melted down to make a barrel or anything like that.4. it can only use compression(string) torsion(string twisted) and tension(rubberbands), no air compression allowed.so good luck to everyone!for inspiration, i will put a picture of my newest creation, MY SNIPER RIFLE! it is finished and i will post a instructable soon.(i won't enter it into the contest though)
Topic by dsman195276 | last reply
Hey everyone, I know it been a long, LONG, freakin time that I've been inactive. I have not posted any guns since the beginning of August 2012, but now I almost finished making a sniper concept. It is called the XPR 50, which is supposed to be a semi auto sniper featured in Call of Duty: Black Ops 2. This isn't a real gun now, and there aren't any pictures of it in real life. I made the sniper from the picture in the black ops 2 game, which is in a really bad angle, with some parts of the gun distorted. I worked my butt off to make this, and this will be the first knex gun based on black ops 2. I didn't make the mag and the scope yet, so DON'T MENTION ABOUT IT!!!!!!
Topic by CODawesome | last reply
Here it is, The one the only FX-9 Sniper rifle!!!This is the first of five in the FX-9 series. This has been my secret project for the last 2 1/2 months. Here are the pros and cons: Pros: Range 70-80 feet weighs 5 1/2 Pounds sturdy reliable new trigger design 11 layer design cons: uses a lot of pieces no mag bad bipod but if I post I will make a different one Now that you know about it tell me what you think. Should I post it?
Topic by Killer~SafeCracker | last reply
I am reviewing Darth Gecko Man's latest sniper! What to expect: Strength: 8/10 Why: Small chance it will break. Range: 7/10 Why: Too effected by wind with the original bullet Looks: 8/10 Why: Looks good. It is nice and small. Parts: Handle: 5/10 Why: Way too small. Cant fit my hand Stock: 0/10 Why: No Stock!!!! Barrel: 0/10 Why: No Barrel! Fake barrel: 8/10 Why: Works easily and look good Bipod: 0/10 Why: No bipod!!! (This is not necissary. I am just noting that it does not have one. Please no more argueing) Modability: 10/10 Why: This gun is very easy to modify and would be great for beginners to play around with. Even I made a mod of it by adding a stock and moving the front handle to the rear and making the rear handle part of the stock. In the end: Erganomics are not too good. Feels too small. BUT in a knex war it would be good not as a sniper but as a secondary weapon. The trigger system cant hold too much pressure but for a medium range weapon it is good Creator: Darth Gecko Man Gun: Blazer v1 Sniper Rifle
Topic by ajleece | last reply
Just got a new airsoft sniper, and need help figuering out how to zero scope
Question by brickman93 | last reply
I thought the old version (second pic) would be final, but I found out i had several parts, so I modded the top rail a little bit.This was going to be a sniper rifle ,the SPEC-9 v2, but I added a bow to decrease loading time and to make the design work. The major improvements over v1 are the stock, barrel, and it has a new sight now.I would call the longbow SR-l the SPEC-9 v2...This is possibly the biggest knex object I have made.PROS- true trigger- very powerful- good range (70-90 feet)- very accurate- has a sight- better stock- has a collapsible bipod- faster load time than v1 (5 seconds for v2, compared to ten seconds for v1)- NEVER jams or misfiresCONS- out of all my knex projects, this uses the most parts. (but im sure this isnt a problem for every other knexer out there)credits:stock- bartboyBipod- KillerKI do not have a final range because The only place where I can test my sniper bow is blocked by my christmas tree. final range- 70-90 feet.its a combo of my SPEC-9 sniper rifle and my longbow SR-l crossbow.It is coming out this Saturday at the earliest, but im not 100% sure.
Topic by DJ Radio | last reply
ITS POSTED!!!!!!!!!!!This is my latest knex gun, the AR-4 Commando v2. Now that i have gained more parts, i could fix the problems present in the v1.PROS=(a * means an improvement over the v1)-Jam-free mag-also removable in order to mod (its expandable)*-better handle*-more strength*-has a front grip*-stock is more filled in*-true trigger-comes with shoulder strap (optional)*-uses a dual-rail system-slightly more accurate than the v1*-auto-load*-35-40 foot range-has a sight*CONS-uses more parts than the v1-3/4 of the barrel is fake (yes, i tried to make it more accurate, but the ammo kept getting stuck)-takes longer to reload than v1 (mostly because it holds more)-pretty awkward when you use the front gripso, i will post this saturday (if i am not busy), and i hope you enjoy!
Topic by DJ Radio | last reply
What is the most strongest and most accuracy k'nex sniper? I like barret 50 cal. but i don't find any instructions in here
Question by kef4444 | last reply
Is there any accurate snipers that i can make that r not powered by compressed air? Ive tried glove guns they aren't that good i don't think a spud gun would be accurate either.