I'm looking for a knex sniper rifle that has minamal pieces, decent range, a mag (preferably 5 shot) and has a true trigger
Topic by alfpwns | last reply
I have a partially completed sniper at home and i wanted to know if you guys want me to finish and post it, i mean, theres no point posting if it gets a cr*p reception, eh? And it is currently unnamed so i am open to suggestions about that aswell. At the moment it has a cool carrying strap (not mine), a bolt loading system (classic) a bipod, a monopod, and a nifty scope (not mine) I am also working on a new mech for possible semi auto, ill get back to you if it gets anywhere.
Topic by jellybean10122 | last reply
Hi, im new to Instructables, and i havent found a good looking sniper i can build :s i got around 95 yellow connectors, 10 blue spacers, and 6 grey spacers (ouch!) and i got no misc. pieces only some tan connectors and the black/blue moveable thins (idk the name) so if you can help me finding a nice looking sniper rifle (range doesn't matter) please let me now :) ps. sorry for my bad English, it aint my native language
Topic by iColourStuff
HI. This is my new knex sniper rifle that i made. Here are some features. 1 the ram dosent fall out, the ram dosent stick out of the gun, begging true trigger, fires yellow rods, powerful, sturdy desine for minimum breaking, recoil is in the mid to balance it out, detachable tripod or bipod, and its longer than my paint ball gun. Here are some pics, if you like go to dannys fourum topic and vote on it.here is the pic order.1 as you can see this sniper is longer than my paintball gun2 Hahahahahah i got more knex than yoooouuuu!!! =P3 this is the trigger mechinisum when its not pulled. 4 Sorry for the blurry pic but this is the trigger when pulled.5 looking at the stock of the gun.6 The front7 The chamber where you put the rods in8 a last look at the trigger mech.9 the whole gun. Beuty eh?I hope you like this, dont forget to vote on this in dannys fourum.
Topic by knex hater hater | last reply
Ok guys you've got to make a sniper or just a rifle you can enter an already made gun so a sniper rifle or just a rifle!! you win: 5* on all your ibles and a subscription and i will also advertise your stuff for a week! the deadline is: 30th april same as someones micro gun contest HOPE U ENTER UR SNIPER (RIFLES)
Topic by MegaMetal8 | last reply
Hey everyone I'm currently working on the sniper rifle from halo reach and was wondering if i posted instructions if anybody would be intrested in building it because I dont want to post for nothing. It will be mag fed, fires yellow rods, and decenly big but not too big. It is also realistic too.
Question by KnexFreak360 | last reply
K'Nex sniper rifle contest!!!the first contest for this group. this contest is not intended to give people time to make a sniper rifle now, but already have a sniper rifle made AND posted. all you have to do to enter is to put your instructable in the group. this saturday i will make another forum with a list of the entrants. then the voting will begin. so to enter you1. have to have a sniper rifle2. have a insructable for it.thats it.3. it has to be made out of knex only, they can be modified as broken but not melted down to make a barrel or anything like that.4. it can only use compression(string) torsion(string twisted) and tension(rubberbands), no air compression allowed.so good luck to everyone!for inspiration, i will put a picture of my newest creation, MY SNIPER RIFLE! it is finished and i will post a instructable soon.(i won't enter it into the contest though)
Topic by dsman195276 | last reply
Here it is, The one the only FX-9 Sniper rifle!!!This is the first of five in the FX-9 series. This has been my secret project for the last 2 1/2 months. Here are the pros and cons: Pros: Range 70-80 feet weighs 5 1/2 Pounds sturdy reliable new trigger design 11 layer design cons: uses a lot of pieces no mag bad bipod but if I post I will make a different one Now that you know about it tell me what you think. Should I post it?
Topic by Killer~SafeCracker | last reply
I am reviewing Darth Gecko Man's latest sniper! What to expect: Strength: 8/10 Why: Small chance it will break. Range: 7/10 Why: Too effected by wind with the original bullet Looks: 8/10 Why: Looks good. It is nice and small. Parts: Handle: 5/10 Why: Way too small. Cant fit my hand Stock: 0/10 Why: No Stock!!!! Barrel: 0/10 Why: No Barrel! Fake barrel: 8/10 Why: Works easily and look good Bipod: 0/10 Why: No bipod!!! (This is not necissary. I am just noting that it does not have one. Please no more argueing) Modability: 10/10 Why: This gun is very easy to modify and would be great for beginners to play around with. Even I made a mod of it by adding a stock and moving the front handle to the rear and making the rear handle part of the stock. In the end: Erganomics are not too good. Feels too small. BUT in a knex war it would be good not as a sniper but as a secondary weapon. The trigger system cant hold too much pressure but for a medium range weapon it is good Creator: Darth Gecko Man Gun: Blazer v1 Sniper Rifle
Topic by ajleece | last reply
This is my K'nex Rifle, based heavily on the M14 rifle. I'm only showing one picture here, the rest of them are on Knexinnovation. These are the specifications: Fake bolt-action ( pull pin back -> fire ) Removable magazine - Capacity: 9 Add-on rail for sniper scope ( inspired by Chombo ) or other add-ons Realistic look Average - Above average power Shoots blue rods
Topic by Dutchj | last reply
I cant have access to the size of pipes needed so i would like to know how to make the rifle with 3/4" pvc pipes.
I'm drawing up some mental plans for a Sniper rifle. I posted some non-gun k'nex projects but they were never as popular as weaponry. I know there's a tonne of K'nex snipers out there already, but most of them underneath the body are just a basic gun with a blue rod mag, and a lot of the time the mag isn't actually removable. Of course there's nothing wrong with this, I myself have made guns with this setup. However, for my new Sniper, I want a removable mag with lesser-used ammo. I was thinking either orange-connector+grey connector ammo or yellow rods. Basically I wanted to see what the community wants the most, aside from Oodammo, because that's a tad awkward! Also any suggestions as to what else I should add to my Sniper? I was thinking: Removable Mag, breach loading single shot chamber, rails (like ironman's), detachable scope and Bipod, rear monopod, true trigger (of course), pin guides and maybe a section where a small pistol can fit, probably TheDunkis' flat pistol or r3con's (spelling?) mod for it. Oh and maybe a heartbeat sensor for all the MW2 fans out there XD -Lowney
Topic by Lowney | last reply
ITS POSTED!!!!!!!!!!!This is my latest knex gun, the AR-4 Commando v2. Now that i have gained more parts, i could fix the problems present in the v1.PROS=(a * means an improvement over the v1)-Jam-free mag-also removable in order to mod (its expandable)*-better handle*-more strength*-has a front grip*-stock is more filled in*-true trigger-comes with shoulder strap (optional)*-uses a dual-rail system-slightly more accurate than the v1*-auto-load*-35-40 foot range-has a sight*CONS-uses more parts than the v1-3/4 of the barrel is fake (yes, i tried to make it more accurate, but the ammo kept getting stuck)-takes longer to reload than v1 (mostly because it holds more)-pretty awkward when you use the front gripso, i will post this saturday (if i am not busy), and i hope you enjoy!
Topic by DJ Radio | last reply
A little sneak-peek of my sniper rifle to come. :) It is difficult to operate, as it was built for an extreme emphasis on range/power and nothing else.It can use fin-stabilized dart rods IE KillerK sniper rounds.When I have the spare time, I'll run tests to see how much range I can get it to go, how accurate it really is, etc. In the first picture, it is unloaded and not cocked.In the second picture, it is ready to fire a red rod full-power.In the third picture, same as second but closer view of the mechanics.
Topic by Perfect Duck | last reply
I've decided to take DSman's advice and make a beter rifle. It will feature: 1. a better barrell 2. True Trigger 3.Fuller Stock 4.No Cage Sadly, I dont have enough green rods to make both my sidearm and new rifle(w/ a better barrel), so i might make it using MLCAD. Range: I got 38Ft. Con: Single shot
Topic by alfpwns | last reply
Hi guys, i have been playing ace of spades a computer download game. i wasmodding my sniper rifle when i came across this pic. i was wondering if anyone could make this scope in gimp and please make sure the background is transparent for shooting. thanks. heres the pic.
Question by shadow wave rider | last reply
Say hello to RAMSR, the most efficient mag fed pin sniper to date. It has a rubber butt plate, a folding bipod, scope, true trigger, cheek rest, a shell ejecting system, and an internal magazine. it also has a pin guide and fake bolt action. the mag holds 7 red rods, or 4 red rods with shells. Shoots hard. (RAMSR= Reconaissance Advanced Master Sniper Rifle) Should I post? EDIT: I modded it so it almost never jams, and I fixed all of the problems with the shell system. I also gave it a better trigger. the pin bends too much for my liking. it has a pin guide. help?
Topic by rec0n | last reply
Any rifle with low peices? please help!
Question by deadaccount | last reply
Question by jconway777 | last reply
I want a knex sniper rifle that can fire bb bullets, without them falling out, doesnt really matter about a magazine, will be grateful if anyone knos any? or can you mod one to fire them?
Question by stormv2 | last reply
This is my new sniper rifle. It has real bolt action, but does not shoot. When you actuate the bolt, it loads the shell. When you pull back, it ejects and loads the next. The mag is for show, but there is a 5 round internal mag. If anyone would care to mod it to shoot, I would be thankful. Should I post anyway though?
Topic by The Knexpert | last reply
Here are the rules. The sniper must be your own and it must be rated over 3. They will be judged on range, pierceing, accuracy, and amount of pieces. I will need a judge or two for each. The winner will recieve 5* and will be on my Bect of Instructables 2008 instructable. If you want to enter post your sniper on the comment area.Enterants- DJ Radio's knex SPEC-9 sniper rifle T36 Long Range sniper by Darth Gecko Man Kakurito's DragonavJudges- Heat-Seeker Volenteer on the comments if you have a lot of pieces and free time to build.Range-Pierceing-Accuracy-Amount of Pieces (lower is better)-
Topic by Electroinnovation | last reply
I am not worried about the amount of pieces, however I would prefer a good instructable. (Clear pictures/instructions.)
Question by travw | last reply
Cool-looking scope Hopefully multiple round loading system Easy to load and fire Has easy-to-follow instructions on Instructables or some other way Very good accuracy Ammo won't slide out of the barrel if i point it down a staircase to shoot someone extremely powerful or just powerfull needs good range
Question by lynx66 | last reply
A gun,powered by a very strong motor ex: powerdrill
Question by heatblast | last reply
It's one of the coolest looking snipers in my opinion, and I'm currently working on one myself. I just want to see other designs so that I can perfect mine. PLEASE! :D?
Question by knexsniper1 | last reply
I have i great idea in my head for a true semi auto bolt action slingshot knex sniper rifle but i sadly dont have the knex to build it so i was wondering if any knows where i can get some knex for cheap, i mostly need greens rods, yellow con, and white rods. if you know where i can get some knex please say so thanks brock
Topic by yamaha2342 | last reply
What do you think is the best looking (real) rifle? I'd have to go with the H&K SL9. I might try making one actually...
Topic by knexguy | last reply
Hi, I am currently working on my first Knex Weapon I have designed. It is based on the appearance of the Barrett M99 Single Shot Sniper Rifle. The trigger and loading (not firing) pin are based off of the Thriller Lego Crossbow (www.lego-for-adults.com). School is putting restraints on the time I have to build this but I will attempt to submit my gun as soon as possible, probably in early March. But don't count on it, I have always been bad at meeting deadlines.
Topic by Sniperion | last reply
This gun is good looking and works great! it will be on this weak end! yes february 9th or 10th! you know something this gun has a new system it has a breach like mepains sniper rifle but the breach goes into a mag that holds 5 bullets! so there is a new system now for every one to copy off of. YaY new pics! 6.the gun 7.fp (first person) 8.this is how the mag works
Topic by the_burrito_master | last reply