Dragunov v2 or M107 v2?

Which should i re-make

Topic by Katarukito   |  last reply


RGMP V2

Just an updated version of the RGMP. It shoots harder, built better, holds more bullets, and also has better sights then the V1. It looks mostly entirely like the V1 with some changes. The magazines of the guns are totally different and some internals are different. Tell me what you think!

Topic by DELETED_Blue Mullet 2   |  last reply


SR-V2

I did it!!! i finaly figured out a way to fix the problem with the SR-V1. the problem was the ball joint that had to be pushed into the yellow connector. i made a new system. it is very reliable unlike the balljoint. and with the new system little changes had to be made. the only changes were for the better. now it uses no exotic parts. note that for lack of yellow connectors i could use, i moded the barrel. you can use the old barrel but this one works just as well. since i did not change much i call it the SR-V2 for now. i am working on a new name for it so i dont have to ask KILLERK if i can post it. sorry i dont have a pic right now i had to type fast. i will get one up tomorrow probely! insructions will be comming if KILLERK lets me.

Topic by dsman195276   |  last reply


my Sr-v2

A lot of you know my Sr-v1 it used only 89 yellow connectors well here is my Sr-v2 it has a different body from killerk's and a modded mech but it is is the same mech. unlike my other this uses 212 yellow connectors(not the most part friendly) and is so much more powerful I will post if any one wants but i need to ask killerk first. info it is one inch short of 5 feet uses 3 # 64 rbs Range: 200 feet(with bad fins) ammo: killerk's Sr-v2 bolt and now a bunch of random pic of it sorry about the bad pic

Topic by ninjusk   |  last reply


SR-v2 Mods

SR-v2. Minor mods to stock, handle, handle to stock to barrel connections, and slingshot. There are orange connector w/ Y-Piece connections from the handle to the stock, as well as from the stock to the barrel. I will post a picture detailing where if you like. Enjoy.1) Gun2) Slingshot mods.3) Stock mods.4) Connection/handle mods*.*See the small bit on the bottom to the right? It's a bunch of red connectors. Note how it's attached. You can use this to make the entire barrel. It's quite sturdy, just a but of weakness when it twists.

Topic by DELETED_Gilrostwo   |  last reply


Which gun do you want first?

Ok, I am having a difficult time deciding on which v2 to work on first. I am building v2's on all of them, but I want to see which one you want first.vote choices:SPEC-9 v2 (i figured out how to make it use less parts so I can finish it now)Jackal .357 v2 (may be renamed if I build it). Also specify if you want a mag on this gun or not if you vote for itRX-bow v2Closing date is this thursday, 12:00 noon central time.THE POLLS ARE CLOSED.a unaminous vote for the SPEC-9 v2 means ill build that (came in form of Longbow v2)

Topic by DJ Radio   |  last reply


M82/ 107 v2

Any mods i can add to it?

Topic by Katarukito   |  last reply


Knex sr v2.

This is my version of the sr v2. it fires up to about 200ft, nothing really more (i used way better bands then the ones in the pictures). its accuracy is good up to about 50ft. i made it way stronger than the original one. credit goes to the_burrito_master for the bipod.

Topic by ~KGB~   |  last reply


Knex p90 v2.

I got some pictures of the insides so people can make it. sorry i didnt post it because i havent really got much spare time as im out most of the time enjoying the weather (big change for irealnd). dont bother posting a comment if you are going to start complaining why i didnt post it. hope this helps everyone!

Topic by ~KGB~   |  last reply


Knex MP5 V2

Here is my Knex mp5. It shot 40FT using two long bands. I only had one loose rubberband on it during the pictures. It has an internal ram rod cocking system with pin guide. Its seven layers thick, it has that fancy wall coat on the other side to. It has a true trigger, and also a magazine release (I got lazy and didn't make a safety). Its really sturdy and very fun to shoot. It did have a magazine at one point in its life, but I took it apart to help start a different gun. Its very comfortable to hold. Its a little fat in places, and its stock is a little off due to the internal pin guide, but I didn't care its close enough...

Topic by DELETED_Blue Mullet 2   |  last reply


Perfect war gun V2

Hey! i'm back with the V2! Okay, this gun fixes all the problems of V1 like: It know has a mag for the pump action part (that shoots 2 blue rods at a time!) the turret doesn't fall off any more looks cleaner it's got a scope and better sights uses quite a few less pieces (not that different more comfy trigger for all three guns are a lot more reliable So, i might be posting, depending on what you guys think, and i need a name for it! Happy seleziona day!

Topic by Seleziona   |  last reply


Whats the best knex sniper rifle?

I asked the same question but like 10 months ago and i haven't been on that much since then and i was wondering if the sr-v2 is still the farthest shooting. So if it isn't i what is the farthest shooting knex sniper?

Question by ThomasRex   |  last reply


Storm 22_ V2 vote!

Hi guys! I am holding a vote to say which one of my four so far storm rifles or storm 22 pistol I should upgrade to a revised V2! Just vote, closing date is November 1st!Vote countStorm 220Storm 221Storm 222Storm 223Storm 22

Topic by The Jamalam   |  last reply


Crossbow V2 Ultimate Version

After weeks of waiting, I finally got my k'nex back after moving. One of the first things I did was solving a few problems with my crossbow trigger. It took me about 4 hours of thinking and building prototypes. The following things have changed: The friction has been reduced by a great amount. It became much more compact. Does not require ductape anymore. Does not need the exotic hinge piece. Is now very easy to fire. I decided to show the new trigger using a well-built V2 crossbow; which now can finally use it, due to lower friction. This trigger is ideal for people that want a trigger on the v2, it should be buildable from the pictures. (The coloured trigger is the first version, the same as the gray one though) Edit: Instructable: https://www.instructables.com/id/Ultimate-Crossbow-V2/

Topic by Wicky   |  last reply


Jackal v2-NOW POSTED!!!

Its posted!Well, this is my second attempt at an assault pistol. It kinda looks like a combo of shadowninja/IAC AP. This one uses removable mags. Shoots green rodsPros- true trigger- removable mags (expandable)-30-40 foot range- looks tight- capable of rapid fireCONS- looks like shadowninja's AP- sometimes, ammo goes down the barrel and gets trapped in the internals.100% chance of posting!!!!Credit goes to s0lekill3r for the base idea.

Topic by DJ Radio   |  last reply


Knex KLS v2 review.

This is Kinetics KLS v2 review. comfort: 8/10 - pretty comfortable, no rods sticking out on the handle. power: 10/10 - excellent power, considering its semi automatic. i got 40ft with 2 #64s. looks: 6/10 - its not the best of looking guns, but looks can be decieving. innovation: 10/10 - fantastic ideas put into this gun like the horizontal magazine, magazine release, locking magazine pusher and its semi automatic. (i also added a safety on mine) accuracy: 7/10 - the shots tend to bounce off to the left and right a bit, but nothing huge. piece usage: 6/10 - it uses quite alot of yellow connectors and green rods for most people. strenght: 8/10 - pretty solid structure, the handle is the weakest part on the whole gun. reliability: 6/10 - very poor magazine feed. you also have to pull the trigger quick to avoid the bullet from just going vertical. overall: 61/80 - Its a really good gun with cool features that you would rarely find in any other gun, its well worth the build! link: https://www.instructables.com/id/Knex-Semi-Automatic-Rifle-The-KLS-V2/

Topic by ~KGB~   |  last reply


Is there a parts list for the zkar v2?

I was wanting to make one, but with working on an untangle and having another gun, i was wondering if i had enough of everything, especially green rods and white connectors, though i have o ton of the blue connectors, so in some cases i can use those. Then i was wanting to make the zaktangle or zkar v3, whatever they are calling it, and was wondering if anyone other than mepain had made it, and if there was anything more than the video, like pictures. I can tell a different stock, and a slightly different front so that the mag is removable, but its moving around a lot in the video, and when i pause it, it gets blurry. If i built it, I could probably figure out some way, but it would save me some trouble to just to build it like that with some pictures.

Question by Speedmite   |  last reply


TBAR V-2.1

Here is the TBAR V-2.1. I won't be posting it, but it uses a few new things. The main one being a removable mag that uses no cut parts. It has a 40 foot range and good accuracy. Let me know what you think. Killer~SafeCracker

Topic by Killer~SafeCracker   |  last reply



Ghost V2, Selez's Dragonouv or Dash? Answered

WHICH ONE?! ill have this question open for a week (starting saturday) then see what has most votes

Question by MegaMetal8   |  last reply


knex iron man helmet v2

I just finished making my second version of an iron man helmet its got a flip up mask and a lot slimmer look instructions coming soon

Topic by gerrits13   |  last reply


Ar-4 Commando V2 Review

Ok, lets have a look at the latest creation of Dj Radio!The Ar-4 Commando V2!What to expect:Strength: 8/10 Why: Small chance it will break.Range: 8/10 Why: Very good range.Looks: 9,5/10 Why: It looks great and very realistic!Parts:Handle: 8/10 Why: Just because it rules comfyness (new word)!Stock: 7,5/10 Why: A bit on the bulky side.Barrel: 7/10 Why: sometimes jams because of the tan design.Fake barrel: 8/10 Why: Just because it rules!Bipod: 7/10 Why: It's only for show.Add-ons: 9/10 Why: Bi-pod + Expandable mag = Just Awesome!In the end:The Ar-4 commando V2 is great fun and a must build for any knex gun enthusiast!The range is pretty high and the stock is very comfy.To round it up: Just Awesome!Creator: Dj RadioGun: Ar-4 Commando V2Reviewer: Viccie.B1993Hope you enjoyed the review and, have lots of fun with the Instructables site!Rights are owned by Dj Radio.I had permission to review.Viccie.B1993 and Dj Radio,

Topic by Skreetsha   |  last reply


A bullpup SR-v2 (just the desin of it )

To start I know the true definition of bullpup is mag behind the handle but i does not matter. I made it on MLcad as you can see, it will probably be my last sling shot i make so i want it to be the best i have made so If you have any thing that would improve it, tell me (sorry for using bold but people will see it) i will probly try and put a... safety a winch( to make loading easier) 2 bipod locations ammo storage and what ever else anyone can think of

Topic by ninjusk   |  last reply


Dutchj's K'nex Rifle V2 ( UPDATED )

This is the gun I'm currently working on, the second version of my rifle. To call it an improved version of my first rifle is not appropriate here, as I designed this one from scratch. It's not finished yet, but I can list the features it has now: 14 shot yellow rod removable magazine Low friction, tilted firing pin on a rail ( with red connector for easier pull-back action ) Adjustable stock ( 3 positions ) Comfortable handles and stock True trigger ( duh ) Possibility to add bipod To do/fix list: Design scope + attachment mechanism [DONE] Fix minor reliability issue ( The gun needs a high amount of power to shoot reliably ) [FIXED] Fix fake barrel ( may intertwine with reliability issue ) [FIXED] Design a bipod [DONE] Design a better stock [DONE] ( The one in the third picture ) Lower stock for more comfort [DONE] Extend fake barrel a bit for better looks [DONE] Any good suggestions you guys may give me ; ) Any constructive criticism is appreciated. EDIT: Here's the video I promised I would post today. I know I said I was going to post this gun this week, but as it turned out, I didn't have as much free time as I hoped. The video shows the following: Inserting the magazine Firing the gun Demonstration of bipod Demonstration of sights and scope Demonstration of adjustable/removable stock. EDIT 2: I've been working on this gun quite a lot, and I've tested the crap out of it. This is what the latest version looks like. The more observant people among you will notice that it is not a rifle anymore. I've made it SMG size to make it a lot easier to work with, and to save parts. A longer barrel can be added pretty easily, thus it will posted in it's current form. Now for the changes: A big improvement on the barrel, which is now a connector barrel instead of a tan/cut grey barrel. This makes it a lot more powerfull then the previous versions. I have had some problems with the firing pin, but it has held up nicely as it is now. The pull-back range of the firing pin is also at its maximum, because it is on a rail I don't need to have any part of the firing pin inside the barrel behind the trigger to keep it stable. This gives it an edge over other guns with less pull-back. It took me quite a while to actually get it to this point, because it would jam all the time. Come to think of it I should have tried the more obvious thing first, as it seems to work fine now, though I recall it jamming before. One of the good things about this, is that it uses only 5 exotic parts. 4 black Y connectors, and 1 K'nex man head top. I know some of you may not have the latter, but it is absolutely necessary, as without it the firing pin would mess up the barrel or vice-versa. Finally I would like to note that this gun can be modded to use the rails that Ironman69 came up with. The rear sights can be used in the same way on the stock version. Well, that concludes my wall of text for now. This topic is getting mighty big, is it? Anyway, I hope to see some thought trough comments on this, not just "post!". Constructive criticism, as always, is more then welcome.

Topic by Dutchj   |  last reply


Can someone give me a parts list for the Sr-v2? Answered

There is a tiny ( like 5%) chance that i and many other knexers would be able to build the mighty Sr-v2. Can i have a parts list?

Question by NYPA   |  last reply


does any one have a smaller version of the sr v2? Answered

i want a smaller version of the srv2

Question by knexknex22   |  last reply


Where can I find the ZKAR v2? Answered

I'm looking for the ZKAR on KI for ages but I can't find it. Please help me!?

Question by H1T4TCH1   |  last reply


ZKAR V2 Mod-Fixes rapid fire problem

Hopefully you can see what this is. Replace the borken Y-clip with a grey connector. remove the blue rod and the grey connector in the gun already to make this fit. This new bullet lock fixes the rapid fire problem with the zkar V2.

Topic by rec0n   |  last reply


Longbow SR-L v2 -Now posted

I thought the old version (second pic) would be final, but I found out i had several parts, so I modded the top rail a little bit.This was going to be a sniper rifle ,the SPEC-9 v2, but I added a bow to decrease loading time and to make the design work. The major improvements over v1 are the stock, barrel, and it has a new sight now.I would call the longbow SR-l the SPEC-9 v2...This is possibly the biggest knex object I have made.PROS- true trigger- very powerful- good range (70-90 feet)- very accurate- has a sight- better stock- has a collapsible bipod- faster load time than v1 (5 seconds for v2, compared to ten seconds for v1)- NEVER jams or misfiresCONS- out of all my knex projects, this uses the most parts. (but im sure this isnt a problem for every other knexer out there)credits:stock- bartboyBipod- KillerKI do not have a final range because The only place where I can test my sniper bow is blocked by my christmas tree. final range- 70-90 feet.its a combo of my SPEC-9 sniper rifle and my longbow SR-l crossbow.It is coming out this Saturday at the earliest, but im not 100% sure.

Topic by DJ Radio   |  last reply


Knex Gun Review: The Sipriani Rifle V2

Creator: Viccie.B.1993Link: https://www.instructables.com/id/The_Sipriani_Rifle_V_20_Revised/Area Overviews:Comfort: 10/10Range: 10/10 (well over 100ft)Power: 10/10 (can pierce 2 sheets of card from 35ft.Gun Strength: 9/10 (highly unlikely to break)Gun Overview:Stock: 10/10Handle: 9/10Barrel: 10/10Trigger: 10/10Comments: Outstanding. this gun is incredibly powerful and looks great, the stock is extremely comfortable, looks good and fits snugly in your armpit. the gun can handle an immense amount of power without snapping (this being the revised v2.0), and deliver the bullet straight with only a little drop in height. it is extremely accurate.This gun should be built by anyone looking for a reliable, absolutely awesome knex creation!

Topic by statified   |  last reply


Knex Semi automatic Blowback pistol V1 & V2

---------V1------------ Hello, here is my Knex semi-automatic blow back pistol that yes, actually worked! It held 4 rounds and it could shoot very rapidly. The slide pulled back about two inches but slammed forward with power! It shot 35 feet using one rubber band. ---------V2------------ The V2 is the non metallic version. It holds five grey connectors and can shoot 30- 40 feet using two #64 rubberbands. Its slide can pull back three inches before slamming back to fire the bullet. It also has a much better construction build than the V1 but doesn't look as good.

Topic by Blue Mullet   |  last reply


New AR-4 Commando v2-NOW POSTED

ITS POSTED!!!!!!!!!!!This is my latest knex gun, the AR-4 Commando v2. Now that i have gained more parts, i could fix the problems present in the v1.PROS=(a * means an improvement over the v1)-Jam-free mag-also removable in order to mod (its expandable)*-better handle*-more strength*-has a front grip*-stock is more filled in*-true trigger-comes with shoulder strap (optional)*-uses a dual-rail system-slightly more accurate than the v1*-auto-load*-35-40 foot range-has a sight*CONS-uses more parts than the v1-3/4 of the barrel is fake (yes, i tried to make it more accurate, but the ammo kept getting stuck)-takes longer to reload than v1 (mostly because it holds more)-pretty awkward when you use the front gripso, i will post this saturday (if i am not busy), and i hope you enjoy!

Topic by DJ Radio   |  last reply


Johnhall14's Tactical Shotgun v2 Mods and Review

Whatup! So I built Johnhall14's Tactical Shotgun v2. It was pretty ownage, but there were a few things that popped out at me as annoying, but easily fixed/modded: -Underbarrel shotgun's trigger guard kinda got in the way and was flimsy -No sights -Handle guard broke a lot; got annoying -Pin pull was obstructed by lots of yellow connectors -Trigger was a little short (imo) -Pin got stuck on pin block when being pulled back Now, these are all the negative things, but in the original gun, the positives outweigh them. Here are all the things I love about this gun: -Powerful. This gun is actually really, really, powerful. -Looks pretty nice -Mag is easy to use and looks cool -Underbarrel shotgun is awesome and really fun to shoot -Shoots 3 bullets per shot, with a mag. Now that's firepower. -Great range for a shotgun: 35-50 feet So I decided to mod the gun and fix all the things that annoyed me. Here's what my mods have done: +No more underbarrel shotgun trigger guard +Simple sights (better than nothing) +Reinforced handle guard +Pin no longer obstructed, which actually makes the gun look cooler (imo) +Thicker handle (May not be a plus for some people) and sturdier stock +Revised mech so pin doesn't get stuck +Metallic 6th and 7th layers, even on mag +Modded mag that shoots one bullet at a time +Easy to grip pin This gun, after mods, is probably one of my favorites that I've ever built. It's powerful, it's got some serious firepower, and it looks awesome, which can't hurt. Props to Johnhall14, this gun is awesome! ANYWAY, check out the video of this gun in action! DISCLAIMER: I edited the video so times in between reloads were cut out. The ROF shown is really inaccurate, and it's much slower than you're about to see. The ROF is still good, but it's not this fast. More Mods/Review -  Red's Reliable (R3)  

Topic by FlyingFish10   |  last reply


My K'nex NG Series

So, basically, I have made a new K'nex gun series. I have decided to post pictures of failed NG guns, and you guys can see if it's fixable. Also, this forum will hold all requested internals, a complete strip-down of every gun, (from V3 on up), and possibly reviews of each future NG gun. Ask questions here if you want, give me suggestions, or come back to this forum post once in a while for any failed projects! Hope you like it! Pictures : (in order) NG V3, NG V2, NG V1, and internals of the V2.

Topic by knexguy237 


Trigger Mech Difference Between SRV2, Sipriani, and Striker Pistol? Answered

I want to make a gun using one of those trigger mech. But I don't know how they work or which one is better. Please Help!!!

Question by Pizzapie500   |  last reply


Names for K'nex guns

Hey, I've decided to name my weapons, like the heavy does in TF2. They are as follows (and they will NOT work without the Russian accent):Storm 220 V1 = SaschaStorm 221 V1 = GertieStorm 222 V1 = UrsulaStorm 223 V1 = BerthaStorm 220 V2 = NataschaStorm 221 V2 = RosmertaStorm 222 V2 = Nikita(postage after we've moved house) TJ-ASTR V1 = LucyJamassault pistol = HannahTJ-SR-V4 = BarberaStorm 22 Pistol = NathaliaI'll be referring to them by name from now on, so you better learn these!

Topic by The Jamalam   |  last reply


SR Commando v1- NOW POSTED!

I have been hyping this gun up in the chatroom for a bit, so I got a pic today.This is A combo of my 2 best knex guns I ever built- The AR-4 Commando v2, and the Longbow v2. I made it mostly for the innovative ideas it brought, but i wanted to see if it was possible to combine the AR-4 v2 and Longbow v2.This gun uses an extremely reliable BRAND NEW sear system trigger which never misfires or jams, I thought of making a double-ratchet system and put it in a super modded Longbow handle. The stock Is an uber modded AR-4 commando stock. Same thing with the barrel.It is a single shot, but it can have a mag. Range is 40-50 feet (one rubbeband).the second pic is a close up of the mech.The only con I can think of atm is that this gun is sorta skeletony at the bottom. But its extremely sturdy neverthelessOk, I changed the name because I thought it would be less confusing and more appropriate.

Topic by DJ Radio   |  last reply



How many green rods does the ZKAR v2 need? Answered

Berkin sent me a lot of knex, so I thought I would try to build the ZKAR again.  He sent me so much that I think I can build both the ZKAR and my AR-4 v3 at the same time. Ok, so I changed the question because nobody would give me a green rod count.  Somebody answer please.

Question by DJ Radio   |  last reply


Whats your knex arsenal?

In my knex arsenal i have 4 outstanding weapons. i would mainly use them for a knex war. they are: (1) asault rifle / primary weapon:  ZKAR v2 (2) sidearm / secondary weapon: Mezak (3) sniper / sharpshooter: sipriani rifle v2 (4) bazzoka / heavy weapon: Knex heavy cannon v5 handheld thank you for the people who made these outstanding guns! now, show me you knex arsenal!

Topic by ~KGB~   |  last reply


Best weapon to use in a Knex war? Answered

What is the best weapon to use in a Knex war?

Question by Hiyadudez   |  last reply


Sipriani Rifle V1

Sadly, I don't have enough green rod to build V2 (or do I?). BUt I already saw that Statified( IF thats wrong let me know I can't spell worth ****) had done a review on the V2 so I made V1 and wanted to Review it. Over all I think this rifle if an extrodinary rifle and awesome looking. Power : 10/10 Accuracy: 10/10 Strength: 9/10 might break Reliability: 10/10 Looks: 9/10 If you think otherwise, my minion will get you

Topic by alfpwns   |  last reply



NEW! K'NEX R5 and MSMC

Check them out! https://www.instructables.com/id/KNEX-Remington-R5-RGP-Build/ https://www.instructables.com/id/KNEX-MSMC-V2-Build/

Topic by The Red Book of Westmarch   |  last reply


How do you properly set up a transfer pak in Project64's N-Rage's Direct-Input8 V2 1.80a Plugin?

I am running Project 64, and recently got Pokemon Stadium and Pokemon Yellow (I know it's for the Gameboy, and have the emulator.) For the love, I have no idea how to properly set up the transfer pak to run with the software and make the game playable. I am using theN-Rage's Direct-Input8 V2 1.80a Plugin. Could anyone who knows how to do this give me instructions?

Question by AlternateLives   |  last reply


Which gun?

Hi everyone! i want everyone to vote on which gun i should build after i post my T36 Choices: New semi auto gun Fully Automatic With trigger True shotgun with pump action Extrem V2 Thanks for choosing!

Topic by Der Bradly   |  last reply


AR-4 v3 VS ZKAR V2 Round 2 (Personal experience)

After reading knexgeek's review, I decided to build the ZKAR to see what my AR-4 was being compared against.  I can't do a side-by-side comparison because I ran out of green rods.  Anyways, Here are the advantages of both guns over the other. ZKAR advantages over AR-4 v3: -ROF -Size (smaller, but weirdly uses more parts than the AR-4) -Comfort -Better trigger -Yes, I guess it does have a nice, clean design AR-4 v3 advantages over ZKAR: -Range (gets a slightly better range than ZKAR with an equal amount of bands, around 5 feet better) -Reload (While you can easily slip rods in at regular intervals on the AR-4, I find it a bit difficult to keep the ammo in before I put the pusher in on the ZKAR) -Sturdier than ZKAR (I find that some parts on the ZKAR break after heavy use, while the AR-4 v3 is just fine) -Farther pin pull Now both guns have their flaws, Let's just list some of them: ZKAR flaws: - The back wall on the mag closest to the trigger can break off.  However, it's a good note that the bolt always touches that back wall so I guess it evens out.  It has only broken once when test firing. - If you somehow pull the bolt back and push it forward twice, you find that it can jam and it's a pain to get it fixed. - Sometimes the bolt breaks.  However, to be fair, it only broke during ROF tests. AR-4 v3 flaws: - Can't be loaded upside down (I don't see this as a major problem, and you can shoot the gun upside down, but idunno why you would wanna) - Sometimes the bolt doesn't go into the chamber without "Help", but then you can just stick your finger in. - A few times, the ammo completely misses the bullet lock.  This is rare though. So I guess that's my comparison.  I do like the ZKAR and it does live up to it's rep, but I think it's all an even playing field with each gun having it's own uses on the field. While I'm at it, here's a ZKAR v2 review (I know there is another ZKAR review, but that was for the first version) Body structure: Stock: 9/10.  Why: very sturdy and comfy Handle: 7/10 Why: Sometimes pinches your hand Trigger: 10/10 Why: Very sturdy and original Body: 9/10 Why: sturdy, but a bit hard to build Mag: 7/10 Why: Small chance that the rear mag wall will break off (that has only happened once to be fair) Bolt: 7/10 Why: Works, but the bottom part that pushes the ammo up to the barrel can break after heavy use. Overall: 8.1/10 Performance: Range: 9/10  Why: 55-60 feet with 2 bands Accuracy: 8/10 Why: Accurate at close quarters, not so much at longer ranges Power: 8/10 Why: puts huge dents in cardboard Reliability: 7/10 Why: Sometimes the bolt catches on the ammo being loaded up in the barrel and causes jams.  This is rare and has only happened to me twice.  Everything else is fine. Overall: 8/10 Final score: 8.1/10 Nice gun zak!

Topic by DJ Radio   |  last reply


So what Knex gun should I build next?

I have built the ZKAR v2 before, it really was a magnificent gun. Played quite a few wars with it and I beated the entire neighbourhood and their El Diablo's and Turret Pistols. It was my trusty gun and we have been through quite a lot. Now it is time for me to say goodbye to my beloved ZKAR w\scope, and to step up. The ZKAR v2 was great, but now it does all weird things. It breaks down very often and such. The bolt often jams and the trigger doesn't work quite properly either, but that's more because it is a really old gun. I've been using it for almost a year now if not more then a year. It is time for me to use something else. Only one question remains. What should I use? I need a Knex gun that can either beat or outclass the ZKAR v2. That means reliability is key, yet any kinds of fancy guns would still be nice. I am already thinking something like swagboss or D-TAB. Anyone has any suggestions? Preferably no TR-18. I can't stand turrets, they always have problems with me.

Topic by TigerNod   |  last reply


Parts count for knexsayer? Answered

I dont know if i have enough parts to make the knexsayer. I know that if i can build it it will be wihtout the stock. I can almost build the heavy cannon v2 and can build the v3 with enough parts leftover for a few pistols or a small assault rifle.

Question by 182515   |  last reply


Your Ideal K'Nex war weapon set?

What would your ideal knex war set be? For: a)1 weapon b)2 weapons c)3 weapons d)4 weapons e)5 weapons f)6 weapons g)7 weapons h)8 weapons It should be shown as below, say you have a 4 weapon war, you would have the weapons from a-d. So, sort of a ranking system of what guns you would use. Mine would be: a)BR18 b)Storm 220 V2 c)Storm 221 V2 d)Jamassault pistol e)TJSG Shotgun (Slideshow soon) f)TJMT - My secret project ;) g)Zak's Assault rifle h)Knexsayer Thanks, hope you join in!

Topic by The Jamalam   |  last reply