On july 2008 i bought my 4th x-box 360 and this time i got a halo limited edition thinking it would maybe perform better but the same problem came back,it does not want to read any type of discs. In early september i bought an X-BOX 360 DVD DRIVE,HITACHI LG 79FK GDR-3120L NEW! (Other) (79fk). I replaced the old one and apparently,i need a firmware. Would someone explain me what it is or what i need to do. Thanks to all. any tips would be very appreciated
Question by Athanas
Hi!Have been looking around on google, to find some ideas to my speakers, and sub, but I can't realy find anything that could be nice.But I have been on this website before, where I found other nice stuff, so wondered if you could help me out, finding a idea, that could be cool to try.Here's how my system looks, http://www.gaming-shop.si/images/Logitech-X-530.jpgIt doesn't have to be much. Just make it look different, but still nice or funny.And, if you dont mind, would yu please find a picture, of what you mean, if its a material to put around, or a toturial, if yuo got any, thanks.
Topic by L33boy | last reply
Question by johnnyblueflash | last reply
i just installed a new dvd hard drive on my xbox 360 and it still does not work is there something else i need to do? Answered
I just installed a brand new dvd drive for my xbox 360 and it still will not play disk is there something else i need to do
Question by sherry123 | last reply
This is my situation: 1. My best friend lives right next to me and owns a 360. I can go an play his all the time. 2. The price is not important (I've saved up) 3. I don't have an HDTV 4. I want the best graphics Which console should I buy? Will the PS3 come out on top in a year or so?
Topic by Toddson | last reply
I have a problem, with my xbox 360, it freezes and says that the disc cannot be read. It also makes a clicking sound.
My Xbox 360 is having a problem that causes it to freeze up, (in a sense). I can hear, what sounds like the drive, make a clicking sound. Then after a number of clicks, a window pops up saying that it cannot read the disc, that it is dirty. The disc is clean. I also had the three ring problem, which I just recently fixed by fixing the x-clamp problem. Does anyone know what my problem could be?
Alright, I was messing about with my knex, attempting to make a knex gun with a removable mgazine. I had made the clip and I then noticed my knex book-end that I made ages ago. I noticed that my knex gun clip would fit inside it, so with a little modding I think I have come up with the worlds smallest knex gun with a removable clip. It's roughly 12x8x3.5 with the clip in, and 12x6x3.5 without. Please post any atempts to beat this or correct me if I'm wrong becuase I have not researched this so it might not be the smallest. Tomm0505
Topic by DELETED_tomm0505
You may thing this sounds weird or stupid but i think we can evolve like if your falling of a building if you concentrate and focuse on evolving like fly it will trigger and make you a mutant it just all a trick of the mind you control it doesn't control you.
Question by the hellphantom | last reply
I believe everything is possible, with a little bit of help and that's what I need now. I can't build out those fancy CNC machine found here, since it's beyond my knowledge and skills. However, I thought about modifying a cheap ink-jet printer to make it into a DIY laser etcher this way: -Replace the ink part with a custom laser - instead of giving a current in order to flow ink, the laser will be powered. Laser requires different power level depending on the material, perhaps a potentiometer knob on the laser power supply could do it? -Remove any rolls and paper-only specification: instead, make THINGS able to go inside by simply destroying the printer, rising it up, and use the bottom paper rolls as the Y axis motorization. (The ink-jet head will be the X axis). Why would I do this? I have no idea how to programm small electronic chips, even less how to hook them up to computer or software. I, however, am able to print black and white images, and believe the black can simply be a signal to "laser on". I strongly believe this is possible. Since I can't, as stated above, mess with microcontrollers, I suggest adding potentiometers to the motors and laser and calibrate it myself, and adding physical marks (e.g: sharpie marks) to mark my settings. My question is: Do you think it is? What else could be required? Did I miss some obvious point that would render the previous idea totally worthless, and is this point solvable? Please comment :)
Question by matroska | last reply
Opinion: In Final Fantasy VII, how do you think Cloud would react if he were to see Aeris again in person?
I Might use some of your ideas for a project.
Question by AlternateLives | last reply
Well, who here doesn't think that x-rays look cool? I personally digg them.So check out these cool designer x-ray lamps! Engadget informs us that, Unfortunately, these lampshade / lights aren't yet available to purchase -- another dream dashed by cruel reality.I however say we will not miss out! so, i think if someone was to get a picture of a bulb, put it through photoshop to make it look like an x-ray, print it out on some paper, stick inside a custom light enclosure, and there you go. A fancy x-ray light.
Topic by gmjhowe | last reply
Well, I making one of these and I need 1" x 1" timber, I can't get there until the weekend, but I'd like to get a price so I can give my friend an estimate on how much the sculpture will cost. Thanks
Question by Pie Ninja | last reply
I want some ideas on what mods the gun needs so I can make the X-12 version. ****Edit**** If I remade it today, it would look like a G3 dead on. And this was a generic sling gun.
Question by beanieostrich | last reply
Hey guys. i'm making a desk that's 90in x 30in x 30in.. i will be using a piece of MDF that's 94in x 30in x 3/4in. i plan on using 2 x 4's for the back and right side of the frame and screwing them to the wall studs. the rest of the frame will be made with 2 x 2's. i plan on using the space mainly as a computer desk. fully loaded i'm estimating about maybe 100lbs on the desktop at one time. i attached some pictures of the my current plans for now as well as the sketchup file. so that you guys know what i'm talking about.. my question is.. do you guys think the frame is strong enough to hold the desktop and about 100lbs of random stuff. thanks in advance.
Topic by NodozFi2eak | last reply
I hav macbook with os x not the snow leopard. im a novice computer guy at best. i hav a my passport essential external hard drive 1t. my goal is to hav my music n video all on external. thanx
Question by djdmd | last reply
Question by drifter416 | last reply
Ok ive been knex'ing for a little bit ive decided that i like pistols the most. my favorite being the M1911 and beretta 92fs but the king of all pistols the desert eagle i have seen every replica of this gun/guns (including the other two) and none of them work like them. if im correct selezonias M1911 looks real but no mag in the handle and no slide. i havent seen a beretta yet. and the desert eagle no one has actually made one that works like the real one (back slide action) the closest gun ive seen is ironman's i forget which one so i want everyone to tell me which one i should build. your vote would be very helpful.
Topic by Im_the_knex_god_hail_me | last reply
I want to make it again but i cant find a picture of one unmodded
Question by knex man123456 | last reply
What has happened to all of the good knex guns and weaponary. If you took the quality of all the Killer K Copys and put it together we could make an ultimate knex gun. I was Just thinking wouldnt it be good if there was a contest on the ultimate knex gun or weapon (Sword etc)
Topic by Danny A | last reply
Hi all, I need to figure out how to make a giant inside of a computer for a school project for my kids class. I can get a 2"x4" frame for the entire space, but need ideas of how to decorate the inside of this giant box. Any brilliant ideas on how to do this thing on a shoe-string budget? Thank you all for your brilliant ideas. I am a worker, not creative!
Question by tinkj | last reply
I am looking to buy something along the lines of this http://www.foampitcubes.com/ (but larger) to pad the inside of some oversized gauntlets that I am making and was wondering where i could get a 2ft x 3ft x 6in (roughly) sheet of the stuff for cheap. Thanks.
Question by ClockworkMonkey | last reply
After applying the X-clamp fix (Just like the tutorial) comming to the part of overheating the Xbox. The 3 lights wont change in 2 lights (i'm running it over a hour now). Whats the solution?
Question by Your360
Hey, peoples! I made a simple pistol yesterday, and thought I would show it to the K'NEX community of instructables. :) It's my first working gun, based on the Derringer Rider White S342. It doesn't have a mag, but does has a true trigger. :D Enjoy! - x-treme
Topic by x-treme | last reply
I need help designing a circuit (off of another circuit) that will limit the output voltage to X. I need X to be adjustable from between 0-700 mV. However, I need it so as the input voltage goes up, the output voltage will stay at what it was set to. Without clipping. Any advice? Thanks!
Question by heyzuphowsitgoin | last reply
Question by Inventor X | last reply
i have recently aquired a Projection TV without the screen, on the insides of it it says X-ray Critical part?
just wondering if its safe to tinker with and pull parts from? the top portion of the TV was cut off but the Lens's are in tact i dont believe anything is broken
Question by joshr45 | last reply
Question by jase913 | last reply
Please, someone suggest and leave a link of an actually functioning knex grenade? I'd be happy if someone could..
Question by Inventor X | last reply
I live in estonia. No bamboos here. So I was thinking to use copper tube. I find this http://www.aflauta.com.br/hist/bamboo.pdf Problem is inside diameter and wall thickness. If i'm getting it right for every key is right inside diameter and lenght I can buy straight copper tubes/pipes: 15mm(outside diameter) x 1,05mm(Wall thickness) 1,05x2=2.1mm 15-2.1=12.9mm(inside diameter) 18 x 1,0 1,0x2=2 18-2=16 12 x 1,0 1,0x2=2 12-2=10 10 x 0,8 2x0,8=1,6 10-1,6=8,4 Whats the best? I was thinking to use 15mm and 18mm tube 18mm for key a 15mm for key d I ended up with 15x1,05 copper tube. Thinking how to use this: http://11wall-west.com/~ph_kosel/flutomat.html If I use this measures http://www.phy.mtu.edu/~suits/pvcflute.html I get 7.2mm for blow hole and 6mm for finger hole. My tube I.D is 12.9 Is there any flute calculator that calculates hole sizes for right key? I am also thankful for any flute related help what helps me to make copper flute.
Topic by DeathSuperMario | last reply
I'd like to build something with more capacity into an NES controller. So I'd like to know what could fit. don't wanna spend that much, but quite some GB would be nice. I don't know the inner measurements of the controller sadly since mine hasn't arrived yet, but outer measures are 12,3 x 5,3 x 1,7 centimeters. thx folks
Question by derivatart | last reply
Speaker switch box (2 x 2 or 4) with automatic ohm balance / adjustment, has anyone got a design for it please?
Hi, I have a cheap speaker switch box connected to my stereo amplifier as it only had one set of speaker outputs. When the smaller higher power demanding speakers are switched the box causes the more efficient floor standing units to shadow the sound which is annoying. The reverse does not happen, but when all 4 speakers are switched on the sound quality drops noticeably, as it would since the ohm matching is not right. I could buy an expensive Niles box but I don't exactly know the ohms for the smaller speakers since they have had the main drivers replaced (the original foam cone supports hardened and cracked in the dry heat of a few Australian summers). I suspect one set on, and one set off is a simple enough device even I as a novice could design it, yes i can, but would just building a better switch box using higher quality switches solve the shadow effect? and I have no idea about the 2 sets on so any ideas - a internet search didn't help much but maybe you call these things differently in the USA?
Question by dgeer
I want to make a rapid fire controller so my brother will play online with me he is younger and cant tap the shoot button fast enouf "R1" he said if i can make him shoot faster with the pistol in call of duty 3 heel play
Question by I3uckwheat | last reply
Is there any powerful gun i can make out of the K'nex X-treme Dune Hopper Extreme Dune buggy?? Thanks -R?
Ummm... well hopefully a really powerful rifle although doubt it peicesI don't have many peices. =(I dont want a miniture Gun the small ones with Block triggerI WANT RIFLE RWARGGHHH!!! Please answer my Question ASAP
Question by BuilderLoon | last reply