ABCass1

https://youtu.be/iMURt62VOfs

Thank you so much!

Yes big mess, but well worth it. Thank you so much!

Thank you so much, I’m definitely going to try this. Cheers

Thank you so much, and thank you for the tip. I always wondered if that would work. Hey, since your familiar with spray can foam, how do you preserve your foam? Like if I use a small amount of spray, what is the best way to keep the tube from clogging to use it for later projects?

Thank you so much for those kind words. I really appreciate it!

If you like a thicker application, I would recommend using a “high build” epoxy made specifically for rod building. 5 minute epoxies are fine for attaching such things as grips or reel seats, but for threads, it’s sets too fast to properly penetrate and soak into the threads. In addition it is very stiff and not flexible which can lead to breaks... BUT these special epoxies weren’t available “back in the day” and builders of that generation didn’t have access to dryers like we do, so they resorted to applying multiple thin layers of 5 minutes epoxy, which seem to work then. Thanks for sharing!

Thank you so much! I really appreciate it.

Hi,You can use both with it