Aaron Van Dyken

Glad I could help!

Thanks!

If you don't drill all the way through, it will be difficult to remove the scraps of wood from drilling. The shorter the solid plug, the lower the pitch, I believe.

Thanks!

Thanks!

Thanks!

Thanks, good luck!

Thank you!

Thanks! I actually already saw it and was very impressed! I'll leave a favorite on it now.

No problem! I made one a few years ago and never thought of making it into an 'ible

1) No, the plug should not go enter or go past the notch. 2) The plug should be as flat and smooth as possible. I didn't use it, but maybe try sandpaper. It took me a few tries to make a plug that worked well.Try different lengths of whistles as well, but be sure that the notch is proportionate to the length of the whistle

I was photographing in low-light conditions, so I had to keep the photos slightly underexposed. If you turn up the brightness on your phone or monitor, the pictures should be easy to see.

Thanks for the tip. I'll try willow sometime!

Thank you for the feedback!

This is a great and useful Instructable! Well done.