Tell us about yourself!
-looked cool, because I’m shallow'Everyone liked that'Nice project!
Arduino Turns Off Idle Amplifier
Skills Infusion & Going Further
Glad you like it!Screwing the seat boards where they sit on top of the posts was not easy. But from an angle I could predrill through the post and into the board and I had to use an extra long screw.The rod is attached to the center stake with an old rubber band I had layin around (see img1993). The purpose is simply to keep the rod attached but still so loose that it can rotate a bit when placing the boards.
Hi KyleThey are 22 by 45 mm.
Hej LeneDet må vi kunne finde ud af, skriv til mig påallans0311 [a] gmail.comMvhAllan
Welcome to Arduino
40W Bluetooth Portable Speaker (Improved Version!)
There are many types of hardwood. I don't remember the exact name of this wood but it was something exotic. It was cut by a carpenter who was familiar with this type of wood. I noticed that he changed the sawblade in the tablesaw before cutting the hardwood.In order to keep the brown tan of the hardwood you would have to apply some sort of oil once or (in rainy Denmark) twice a year. I never did because I have read that it should'nt affect the lifespan of the wood. The hardwood is now mousegrey.
Go for it, Spiritwalker! If you can use this as an inspiration, go ahead. Then you should add your own personal flavour and ideas and make sure you take some photos along the proces, so you can make your own instructable when your done. And it is really not that expensive...!
Hope this is useful. Good luck with your project!
Thank you very much, cplace1!
If you find it inspiring I am glad. Yes, the black fabric is just there to keep gravel and dirt sperated.
Garden Fireplace with Bench