Tell us about yourself!
Project Aurora: a Smart Gaming Mousepad for 20€
yea thats what i have used also till it got unreliable =/ this really sucks.. Waiting to transmit the stl via the terminal program is a real PITA.. this has worked !very slow! but ok i guess at the beginning but now i get timeouts during gcode upload..so now im kinda grounded as it doesnt matter how i hook up this thing.. via usb or network.. it freezes mid print or timeouts when uploading to internal sd.. i also have the tft32. but printing from that sd card was even more unreliable..so yea.. if anyone has an idea how to get this shitbox working i would thank you eternally.Greetings
Im really having a hard time to get a stable connection to my sbase.. for a long time the only way of printing for me, was transferring my gcodes via pronterface terminal to my internal SD card inside the sbase... but this is very annoying as it takes ages for bigger gcodes and now the last few times the board timed out when transferring via usb so i ended up with some "half" gcode files on my sdcard that i cant use.. does anyone have a better idea on how to connect the board reliably? the SD slot on the TFT also doesnt work reliably for me..Im using windows 7, could it be a good idea to use something like octopi on a dedicated orange pi or something..the timeouts and stops mid print really have to stop! im thankful to any suggestions. Greetings
isnt there any better solution for the connection? im having also issues and its very annoying =/ i just want a reliable printer but so far the sbase is utter trash in terms of stability and reliability...
Straigtening Plastic (PET) Strip
Desktop CT and 3D Scanner With Arduino
Hi there,I think i have somehow killed my ad chip for the ntc on my heater.. as it always shows 380°C..even after i soldered a new 100k ntc still same thing on extruder 1.. i can remap the TH2 to TH4 i guess and try again.. the question is.. if i want to use another temp sensor.. lets say for the temperature in the housing.. are there any other pins i could use for that? like the thermocouple pins (J7 in the right upper corner p.014, p0.15, p0.17)? Or the Analog Pins in the left upper corner (p1.22 etc.) or are those analog only and no AD pins?Greetings
How to Make a Professional Printed Circuit Board: the Complete Guide
Fidget Spinner to Brushless Motor