Tell us about yourself!
Hi Edgar, sorry for the late response, but make sure you have "enabled" allow less secure devices! Not dissabled it. Thx
Hi Edgar, Are you using 2 step verification? If you are that would most likely be the problem, try the troubleshooting steps under this link:https://support.google.com/mail/?p=BadCredentialsAlso by the "bad credentials" Error, It seems to be a problem with your credentials, those troubleshooting steps should fix things. LetmeKnow if it works.
you can use a program called motion, that makes the pi into a live stream camera, then you can have the doorbell just notify you with a link to the stream. please note though, without port forwarding, this will only work in the LAN of the pi, here is a link to a tutorial (note i have not teied this exact tutorial myself) http://www.techradar.com/how-to/computing/how-to-build-a-raspberry-pi-security-camera-1321441/2
No there is not, the tutorial should instruct you on how to do this.
you need the loop to look for the button press, if it is auto "pressing" then change the value on line 13:if GPIO.input(Button) ==False: #when button pressedchange false to 1 or true, if this dosen't work,you have wired the button incorectly.
Thanks for all your information you've put down here about using the pi camera instead.
Raspberry Pi IoT Doorbell
Hi Darmish, I will have a through look today. To help could paste in the contents of IOTNOTIFY2.py in here so I can see what changes you've made. (That the Instructables asked you to do). Before that make sure you've filled out all the fields
Hi JamishA, I think the problem is on your side. What version of the raspberry pi do you have, and what version of raspbian is it running? And have you done any other projects using the GPIO pins on the pi? Then, I will be able to have more information on how to solve your issue. Thx, Angus.
Hi JaimishA, I am currently away from my PC, so in around a day or so I should get back 2 you with the answer to your problem
HOW-TO use the ARDUINO SERIAL MONITOR
ATtiny Programming Shield for Arduino
Raspberry Pi IoT DoorbellView Instructable »