Tell us about yourself!
This is the model: APD DA-30C01
Hello,Unfortunately the timer setup is specific to the ATmega32u4. The Arduino Nano is based on the ATmega328 so it will not work with that part of code. You will have to search the right timer code for the ATmega328.The EEPROM part should work fine with any Arduino.
Hi, thank you! what issue are you having?
Have you tried this https://github.com/giech/LedControlAs I stated in the instructable you will need to edit the library in order to make some text to work. the one above is the link to the branch with the proper modifications
Have you pulled this (https://github.com/wayoda/LedControl/pull/13/commits) commit in your library? That could be a source of issues. I might fork it and pull the commit so that it can be easier to work withI'd love to see some pics of your finished project!
Have you tested the thermometer alone? Try loading an example sketch from the DHT library and see if the behaviour is correct. I have this code running just fine and I also know of a few people that are having no problems with it, so I doubt that's a fault on my part but we shall see.
I don't think that's correct. PM me with further info on how you implemented the controller (components/code).
Have you tried plugging the display to my original pins? What board are you running this on? Does the rest of the program work?
Mhm... this error usually means that you have forgotten a semicolon or a bracket somewhere... Hope that fixes it. PM me if you have further problems
Temperature Control With Arduino and PWM Fans
Make a Battery Protection Circuit (low Voltage Cut-off)
Il you drive the fan with PWM, the RPM reading will be wrong because you're basically switching the fan on and off. Some fans might still report a correct measure if the RPM reading works with the fan turned off, but it's not guaranteed. Happy that you enjoyed my instructable ?
I just checked on Amazon, and the difference between PWM and non PWM fans is just 16cents, so yes, you would save about 1€ but you won't be able to see the actual RPM. Don't know if worth, but if you have 3-pin fans lying around the house it'll just work fine.
Well, you will actually need a transistor to drive a 12v fan through PWM, And you will not be able to read the speed of the fan. Another solution is to drive the fan using a voltage regulator, but this adds complexity, inefficiency and cost.
Temperature Control With Arduino and PWM FansView Instructable »
Welcome to Arduino
HDDJ: Turning an old hard disk drive into a rotary input device
Make a Ring from a Nut
How to build your own USB Keylogger
Hi! Sorry for the very late answer.The HDMI was added with a conversion/upgrade to a media center in mind. It's not used with the actual configuration. In the future I may upgrade this project (using a more powerful Raspberry, of course) to a more complete media center with a great sound quality.
Actually, finding a power supply with this spect is not that easy and i bet a linear one will cost me more. The actual setup is already great for me so I'm not going to upgrade, for now.I think that the bottleneck in quality is the Raspbery, so a Raspberry upgrade might bring some bigger improvements than a new PSU.
That'll be awesome! But the quality is already great and I don't think i will upgrade this anytime soon.
Hi! Thanks for the interest. I've got a question for you.Do you want to stream audio files directly from your phone or do you want to just control the player from the phone?Actually Volumio supports Spotify streaming (Only for premium users, there is no way to bring this to free users), AirPlay and streaming from local or network storage, but Volumio2 is in the works (Checkout their repo, it's awesome https://github.com/volumio/Volumio2) and will include a plugin system that will hopefully bring some new features. I also use an external amplifier (The Marantz you see in the pictures) and I'm very pleased with the quality. Let me know your thoughts!
Atari Punk Organ, a simple 555 synthesizer
HOW TO TURN ANY WEBCAM INTO A HIGH POWER MICROSCOPE.....
Dot Matrix Printer from a CD/DVD Reader with Arduino
Glowing Death Star Christmas Ornament
Raspberry Pi Cloud IP Camera with POE