CNC World

As per creator team of Makerboat gcode extension it is only work for 0.48.5 version

your welcome

p[lug your servo other pin available for servo on shieldand change this in your codeconst int penServoPin =9 ;

Make sure servo is not faulty, wires are tightly inserted

Hello MohamedR23 i have seen you arduino code i thing i dont understand why you define your servo at pin 14 there not any pin 14 in UNO and in Mega pin 14 is TX pin you must have to define Servo at pin 10your current code isconst int penServoPin =14 ;it need to beconst int penServoPin =10 ;

and can you please share exact arduino code which you uploading to arduino i have to see what you edited in it

i suggest you please check your both stepper motor individually wheather they are not faulty, how to do this please see this video.

ok ok i get it, remove it means there is shorting socket over it you just have to remove that socket not whole pin...

I uploaded a complete video how to wire & test run of stepper motor with L293D shield watch this i think this will more helpfull then just images..

there is two type of voltage in board one is VCC & one is V+VCC is for control & V+ is for power function like supply to motors.V+ is what we are getting externalyso LED over L293D Board is a part of control components it is connected with Vcc which is coming from Arduino board so why LED is live when you live arduino

I think you have connected axis reverse like vertical axis and horizontal axis are wire reverse try by inter change them

thank you very much

it's NEMA 17

yes you can use arduino Mega or Uno as main control but yes if you moves towards larger steppers like NEME 17 you need a separate stepper controller card and it's module, for example GRBL CNC shield with 4 nos. A94888 stepper driver shield, all this can mount over arduino board but CNC shield required to give external 12 V DC in this way you achieve more professional work with 3D motion also

"Server not found" error can be caused by Windows Firewall blocking Firefox from accessing the Internet. check basic settings of your pc

thumbs up bro

yes it is, need lots of trail and error, thanks for appriciation..

what i wrote 10w ? its 1.0w apologize, hehe

yes yes offcourse you can use arduino uno

Thanks brother

thanks

just mount L293D Shield on Arduino mega , power the arduino through PC & Connect stepper motor & servo motor with shield give external 5V DC to shield it doneall this is clearly shown in video watch for better clearity

Thanks to instructable it provides a good platform to express

thanks