Tell us about yourself!

Complete Your Profile
  • ChiefTrippinBulls commented on mtongnz's instructable Artnet LED Pixels With ESP82664 months ago
    Artnet LED Pixels With ESP8266

    Alrighty, I've scoured just about every comment and read both versions of this project and I can't seem to get it to output to LED's with a nodeMCU.Changes undergone in my limited understanding of this :-uploaded fresh .bin through firmware option on esp.-output from tx -3.3v regulator going to esp w/ 5v rail on side for ws2812's, all powered from a stand-alone psu. USB power removed once IDE work was finished and esp configured online-tried cpu speed to 160mhz for IDE upload (couldn't interface with esp on browser beyond load screen). Reuploaded at 80 as that was the most progressPresent Status: -OTA interface works great, all settings easily changed, OTA update received-Occasional all-white on the led's, doesn't seem to be linked to anything but moving pins around-jinx I believe is co...

    see more »

    Alrighty, I've scoured just about every comment and read both versions of this project and I can't seem to get it to output to LED's with a nodeMCU.Changes undergone in my limited understanding of this :-uploaded fresh .bin through firmware option on esp.-output from tx -3.3v regulator going to esp w/ 5v rail on side for ws2812's, all powered from a stand-alone psu. USB power removed once IDE work was finished and esp configured online-tried cpu speed to 160mhz for IDE upload (couldn't interface with esp on browser beyond load screen). Reuploaded at 80 as that was the most progressPresent Status: -OTA interface works great, all settings easily changed, OTA update received-Occasional all-white on the led's, doesn't seem to be linked to anything but moving pins around-jinx I believe is configured correctly (refer to pictures) as I've used the same setting with the same static ip with another unit (teensy). The only thing that makes me think otherwise is the Artnetominator is showing that, although the node is being seen, no data is being output anywhere.-Unit is nodeMCU 1.0, i'm pretty nub at this, and I'm a visual person. I don't think I messed up the wiring but it's hard for me to understand diagrams so I could of (breadboard pictured) -When outputting artnet from QLC+, Artnetominator showed that it wasn't outputting to the nodes specifically even though it was directed towards the node's ip. BUT the led's turned on all white and one blue (maybe fried?) (not the intended setting and the LED's didn't change from there.) Even stranger was the tiny blue led from the ESP started to flicker very quickly and remained solid after closing QLC+.I honestly am so frustrated with this project that I'm resorting to bothering ya'll. Thanks to any assistance from anyone.

    View Instructable »
  • ChiefTrippinBulls followed mtongnz4 months ago
      • UPS Warning Lights
      • Artnet LED Pixels With ESP8266
      • ESP8266 Artnet to DMX