Tell us about yourself!
100% for lithophanes is a must. Everything else is thin enough that I use 100% on the other parts as well.
DIY Solar Garage
Hey there. Here is my best guess at the latest iteration without radio option. You will have to double check the IO pin mapping and change pin assignments to correspond to the old wiring diagram (attached).
Perdonami per aver risposto tardi. Ero via e sono appena tornato a casa.Vedi il link per la libreria che ho usato.https://github.com/Makuna/DFMiniMp3/wikips - io non parlo italiano! (Google Traduttore)
I'm not too comfortable with the errors you are receiving with the MP3 libraries. I tried different MP3 libraries and had some other issues getting it to work (not what you're now encountering). I eventually settled on this library and got it to work for me. I don't fully understand the errors you are receiving here, since there are other factors at play. If you haven't figured it out, I'd recommend trying the Arduino forums. For about a week I had one issue on this project I couldn't resolve or find the answer to and someone on that forum pointed to the answer. I had other library issues that caused errors, when others had no problems with them. Sometimes deleting the entire library and downloading a fresh copy fixed it. Other times, it was rearranging code. I'm still trying t...
I'm not too comfortable with the errors you are receiving with the MP3 libraries. I tried different MP3 libraries and had some other issues getting it to work (not what you're now encountering). I eventually settled on this library and got it to work for me. I don't fully understand the errors you are receiving here, since there are other factors at play. If you haven't figured it out, I'd recommend trying the Arduino forums. For about a week I had one issue on this project I couldn't resolve or find the answer to and someone on that forum pointed to the answer. I had other library issues that caused errors, when others had no problems with them. Sometimes deleting the entire library and downloading a fresh copy fixed it. Other times, it was rearranging code. I'm still trying to figure out code errors on other projects!
Word Clock Controlled by 114 Servos
Hi Inventor22,The view in3d is taken care of by the Instructables site, so it beats me! If you really want to know, I’d recommend reaching out to the Instructables moderators. Tomatoskins, et al. They’re very helpful. PS. Cudos on the organizer! Damn that was good!
FindyBot3000 - a Voice Controlled Organizer
Hmm, the legs attach to the leg plate. That is included in the "Portal turret v4.zip" file. The small white part that inserts into the leg plate is included with the servos.I think you are referring to the "pitch frame" for the other part you're missing? There are two shown above. Otherwise, I'm not sure which other part you are referring to.
GoldFish - a Smart Fish Tank Controller
Coke Machine Level Detector...View Instructable »
No pain at all. If I post this build with junk links, then I should fix them!I've updated the section of the build dealing with purchased parts, removing the links and just referencing the common part numbers. Thanks for the heads up.
Sorry bout that Djandco, it turns out they were "hidden" away. They're there now. Too much shuffling of files through the various updates. Thanks for the heads up.I'm happy whenever I am blamed for "forcing" someone to buy a better tool! Happy printing!
Variable Power Supply V2
Portal 2 Turret - Master Tu...View Instructable »
I've uploaded a modified pitch frame, named "pitch frame - modified 1". The pin bores are the same as the original, so you can drill them out to suit your pins. Should be good to over 4mm without concern for making it too weak.
Ever Blooming Mechanical Tulip
75mm x 100mm. The gap in the frame is 3.2mm, so max thickness I recommend is 3mm.
You can view and comment on the design using this link: https://a360.co/2SiUWKm
Target following: yes. One could do it optically with a camera, but couldn't do that with microcontroller like Nano. Would have to go to Raspberry Pi Zero or other microprocessor. It's been done in a Portal turret already!! https://www.instructables.com/id/Building-a-moving-and-tracking-Portal-Turret/I would love to try having multiple turrets in a room that act in a hive-like manner, that communicate with one another and follow a target. Would be cool and creepy!
Little Timmy Robot
The eye is too small and I was working on a quick update to the lens to make it bigger. I will look into the F360 file sharing. Haven't ever done that before.
As for the components, the Lidar sensor the most expensive component at ~$8 (CDN). Arduino and sound chip as low as $3 ea. Servos <$2 ea. LEDs and resistors <$1. Hard components $20 (~$15 US). ~24hrs of printing all parts if you're all set up for it, so maybe $10-$20 there? + some wiring and soldering and hardware. Less than $50 total for sure.
I thought about that, but decided against it. I knew it would garner some attention from friends and family and I didn't like the idea of a child staring into the laser... A bright LED gives the effect, and a super-bright LED would be effective too. Besides, if laser used, next step is bullets....
Ok, post is now complete with Arduino file and STL files. Good luck and happy fabbing!
Thanks! I will be posting the parts and code in the next day or so. Need to clear up some time and tidy them up a bit.
Power Loader Cosplay
Portal 2 Turret GunView Instructable »
Progressive Detail Moon Lamp
Homemade Tin Can Turbine With 3d-printed Compressor
Single Edge Safety Razor Blade Grips
Old Paint Can Secret Stash
The link as shown works for me.
75mm X 100mm, 3mm thick max.
I will be making some more but am waiting for a few parts. I will let you know once I've received the parts and updated design.
Rotating Lithophane BoxView Instructable »
Sure, lots of ways, for the box. Could make this out of cardboard, wood, lexan sheets. 4 uprights with slots to capture the prints. The problem is making the lithophane panels without 3D printing. That is more art and craftsmanship.
Lithophane Box With RemoteView Instructable »
Anglais, Français... ça m'est égale. Je vais revoir mon situation ce week-end.
Hmm, I'm not really in the business of making these for "profit". I thought I was giving it away!!I'll have to figure out how much time it would take plus the parts to make another one, you know, in case I get asked again.
Coke Machine Can Level Dete...View Instructable »
GoPro Stabilizer Project - ...View Instructable »