FabrizioB4

Very very wonderful! I really appreciate this project cause of I'm also middle aged and I want to build a cave to have some quiet place to stay (if they leave me to do so). Just a couple of questions: - how did you fix the vertical poles to the floor? Did you make the frames and fixed them aftewards? - did you reinforce the floor under the stove? Is it heavy?I'm confirming you that wood and hardware prices here (nothern Italy) are rising too much after Ukraine war, it's almost impossible to do anything at reasonable costs!Thank you!

Very nice! Just a question: is it stable enough? I mean: did reducing the base make it more unstable?

Marvelous! Fantastic! I'll make it for sure!! Thank you

I've noticed many errors in the code and some differences between the code listed here and the downloadable .ino (NodeMCU pinout and related functions). If you try to make this project "as is" you get stuck with the motors.

thank you very much

Very nice, beautiful! I'm trying to do something similar and I have a couple of questions please:1 - on step 4 it's unclear for me how you managed to preserve the pallets from the soil moisture: did you leave the tarp to the base?2 - Are the opening windows adequate to maintain a correct temperature inside the green house (expecially during these hot summers)? Thank you

As far as I can understand you are substituting the keyboard with this smart device and you don't install any client program on the computer to map your commands, is it correct?

Good project and looks very nice! I did something similar in my house between the sidewalk and the lawn because I didn't want to cut the grass too near the house. The problem is that the weed keeps on growing between the river rocks even if I've put a sand substrate and a mulch sheet at the base. Spreading an herbicide is not a good solution for me because of kids and animals walking around. I will try to do it better anyway.

I have a bunch of ESP8266 .. can I replace the ESP32 with its older version (changing the code obviously)?

You're not alone man.. We are not alone! Thank you!

I've made many of these and I've learned almost two things: first, assing the time, the pole wood will break near the concrete standing because of the rain, water, moisture, .. so before plugging it into the ground you should protect the poles with liquid asphalt or some protective paint. Last, the weight of clothes could be a great concern expecially when they are very wet and the wire tends to lie down in the middle (center of gravity). This can be solved hanging the poles externally with another wire anchored to the ground like a tent pole or planting the poles slightly out of center, slanting, so they can bear the whole weight of your clothes. Thank you anyway for this project.

Bravissimo! Very nice and inspired project !

Wonderful! Is that anti Covid too? Can I wear it instead of the common mask? :-)

I MUST make it, thank you! Just a question: what is the detection angle of the PIR detector? My neighbour cats find many ways to reach my house and I should build at least 2 or 3 of them to place around the garden. Thank you again!

Very cool project, indeed! I can see just one drawback: do the metal become hot when the pool is under the summer sun all day long? Here it warms a lot and maybe you risk to "boil" within the pool..

I thought that mine was the best but after looking at your one I've decided to rebuild it from scratch: very very nice little house!

Great! just a question: could it be a good idea to make the guitar frets using metal rings on the pvc pipe? The sound would be cleaner I think (but it is already good now).

Nice and very interesting project. Just a question: how do you calculate the aerial length to receive the correct EM wave? It should be different according to what you want to receive, I guess..

But.. Can you drive around in UK with such a vehicle? Here in Italy I wouldn't drive one meter with it and the police will do me a fine. Another thing: the "BMW" Panda is not exactly what they mean as a secure vehicle, here it has a bad reputation and 0 stars by Euro NCAP.. Anyway it's a source of inspiration for me: thank you!

This is a dream of mine.. But it seems that you have built it from scratch, what did you save from the original parts? The frame?

Hi PieBaby89, I'm Fabrizio from Italy: congratulations you did a nice job! What is the taste of this pasta? Here we have some recipes using the beets but no one has been used to make such a beautiful shape (see for example: https://ricette.giallozafferano.it/Pasta-con-barbabietola-e-pecorino.html you can easily translate using google). Just a little correction: we don't say "de amore" but "dell'amore" or you can call it "pasta del cuore" (pasta of the heart) according to its shape.Thank you again!

Great, man! I was looking for a simple cnc project made using recycled components and you have done a great job. Thank you for sharing it!

what about the center of gravity? Does the rear motor put in such a high position overbalance the bike when it steers?