5$ PCB CALENDAR WITH BINARY CLOCK
Clapper LED Candle
Hi, very nice project BUT i think UV leds are very dangerous (and most people don't know it). The biggest problem with UV leds is that they emit a lot of energy and that 'a part' of that energy is not visible to a human (so our blink reflex doesn't work!). Of course it all depends what UV leds you use (the wavelength is important here). I think you should add a warning and do some research about the wavelength and power that isn't harmful! There are many articles online who explain the danger of UV leds. A simple UV pen light has not enough energy to harm you, but an UV led strip might be harmfull in some cases. (Sorry for my English)
Reflow Soldering Hotplate
3D Printable Robotic Actuator
Very nice but you're statement "I can make any non conductive material to act like a touch enabled controller" isn't possible... The material must be conductive to act like a touch enabled controller!!
Hacking TV Tuner to Read Earth Photos From Satellites
GIF Player Out of Paper - IPhone Live Photos in Paper
3D Scanning Class
genious!!!!but i agree with mattieu, i should add a locking mechanism. When someone steal your key....
Drive a Stepper Motor with an Arduino and a A4988 Stepstick/Pololu driver
Getting Started with Electronics
Simple, but usefull! (some Atx's need a minimum power consuption to work. So i should attach a (200 ohm 10 w) resistor between an output wire and a ground.. maybe its a good idea to add this to your instructable :) )
How to Write an Instructable
Welcome to Writing an Instructable
Hi,Here is thelist:Arduino: ‘ArduinoUno’ (Arduino Uno is the best board to get started)Servo: ‘standardservo’ (e.g. S3003)Buzzer: ‘Arduinopassive buzzer’ (I used a ‘KY-006’)Jumperwires: ‘Jumper wires’ (you could use solid core wires (22AWG), but jumperwires makes life easier -_-)Breadboard:‘Full sized breadboard’ (take a full sized one, you can reuse it for otherprojects)Wood: localstoreIf you havemore questions/problems, don't hesitate to contact me!Regards,Floris
Hi Athanasios, great that you are interested in this project and Arduino.it's maybe a good idea to start with some simple breadboard projects to get familiar with Arduino. You can find thousand tutorials online (example).There is no all in one packet for this project, so you have to order the parts separately. Digikey, amazon, ebay, ... are popular sites to order electronic parts. If you have questions/problems with the Arduino, send me a message and I will answer as soon as I can.Regards Floris
Sorry for late reply!I used a 'modelcraft rs2'
A 'modelcraft rs2'
Candle making machine (Ardu...View Instructable »
Welcome to Arduino
3D Printing Class