Tell us about yourself!
Circuit Board Design Class
Storm Glass - the Weather Forecasting Lamp That Simulates Real Weather Conditions!
I don't know any other transmitters and receiver of the top of my head. But on Amazon, there is a Hubsan X4 remote for around $15.https://www.amazon.com/HUBSAN-Control-4-Channel-Transmitter-Quadcopter/dp/B00IO3W74W
Arduino Drone | Quadcopter (3D Printed)
I don't think that these will work together because the TX is made for the Hubsan H502E and the RX is from the Hubsan H107.
There is no setup, it will connect automatically.
Chimera: $60 DLP High-Res 3D Printer
The Pencil Drone
My props are fine and don't fly off. I would suggest gluing them or purchasing ladybirds props instead.
Cool. Tell me when you get it working
With a 380mah battery it flies for around 4-5 minutes.
It can go around 10mph
I think that I included the wrong link to the transmitter and you bought the wrong one. It might still work but if you can send it back then do it to be safe. I am extremely sorry about the mix up.
You really should! It was a great learning experience for me and it is a blast to fly around.
Cheap 105 FPV Micro Quadcopter
Ready to Fly? DIY Cheap FPV Mini Drone
Thanks again for the support, I really do appreicate it.
Cheap 105 Micro QuadcopterView Instructable »
Tesla Coil or Slayer ExciterView Instructable »
FPV Smartphone Monitor
FPV Smartphone Goggles
How to Convert a Toy Quadcopter Into a FPV Racer
Ultra Budget Mini Quad
Micro 105 FPV Quadcopter - 3D Printed
This is an awesome build! I used your suggestion to use the Hubsan flight controller and transmitter which worked great. I have created a remix which can/will evenually be found on thingiverse.