Tell us about yourself!

Complete Your Profile
  • Ghulamf1 commented on RishabhL's instructable ESP8266-01 LED Control1 year ago
    ESP8266-01 LED Control

    Finally get another solution with add one delay on relay at GND So, when power up the system esp will get connection after 02 sec delay relay will activate which will connect GND to GND.Furthermore modify the lua sketch to fix the IP of esp. Still i am looking for another smart way to solve this. Thanks for the idea

    View Instructable »
  • Ghulamf1 commented on RishabhL's instructable ESP8266-01 LED Control1 year ago
    ESP8266-01 LED Control

    Yes I did it yesterday and it was working but it is not possible when project is installed. Is there any other solution for smooth operation

    Yes it is working but it is not possible when project is installed. Is there any other solution for smooth operation. I also try to add diode but it is working only with GPIO 2 pin.

    View Instructable »
  • Ghulamf1 commented on RishabhL's instructable ESP8266-01 LED Control1 year ago
    ESP8266-01 LED Control

    Now every thing working fine but when I restart the esp it get freeze on load(LEDs) and without load(LEDs) restart also fine. restart without LEDs and than connect the LEDs also working fine. Some thing is wrong?

    View Instructable »
  • Ghulamf1 commented on RishabhL's instructable ESP8266-01 LED Control1 year ago
    ESP8266-01 LED Control

    Yes, I am using it but same result. I am using the usb adopter for ESP8266 like this " https://www.aliexpress.com/store/product/ESP01-Pro..." after save the sketch to ESP working fine. But if I remove the usb adapter and connect it again than no response.

    View Instructable »