Simple Dowel Maker Jig
Wow! That is really cool. I raise goats, and this looks strikingly like one of them. Great job!
The Nine Step Goat Program
Nice! I will totally have to use these. I go hunting, and starting a fire with only matches can be a HUGE pain in the rear. Especially when everything is soaked. These work really well. Thanks!
Make a Waterproof Fire Starter
Dollar Tree Foam R/C Plane, F-16K
Cool! Not very expensive, which is important. I like how it is simplistic, and not overly fancy. Well Done!
I meant that to be a comment. :)
5 Old School Plumbing Tricks!
Keep up the good work!
I find myself going out to buy more fittings all the time, because someone miscalculated. This saves time and money. Good job!
Carving a Giant Utility Knife (entirely Out of Wood)
Knife Making 101 (reductive Process)
Adze From Broken Hammer Head
Huh. I never thought of that. I will have to try that. Thanks!
Still too expensive. Unfortunately. Thanks anyway?
Still too expensive, unfortunately. Thanks anyway!
Dang! I never knew the arrow under the gas gauge pointed toward the gas trap! I frequently forget which side it is. Thanks!
The 5 GREATEST Automotive DIY Tricks!
Mid Century Coffee Table
Scaffold Board Electric Standing Desk
Cool! I can't afford the electric desk, does anyone have a cheaper alternative?
Really cool dude!
Make a Benchtop Anvil
Adjustable Modular Furniture
Cool! The plywood handle is my favorite, I have to carry those all the time, and it's not easy to get the right grip.
The 10 GREATEST Plumbing Tricks EVER!
T-Track Assembly Table / Workbench
Modern Shop Stool From Two 2×4s
Plywood Icosahedron and the Other 4 Platonic Solids
One Sheet Plywood Boat
DIY Outfeed Workbench With Torsion Box
Damascus Steel Ring With Wood Inlay
Perfect Wooden Sphere
Soap Vomiting Unicorn
Space Invaders Clock (on a Budget!)
How to Make an Acoustic Guitar
How to Make Triangle Shelves
Yeah they are really nice...
Getting Started With the Bandsaw
Adjusting the Bandsaw
Straight and Curved Cuts on the Bandsaw
Steampunk Tank Mouse - Recycled & Pocket-Sized
25 Cent Fork Ring
DIY Electric Longboard for 146$ or 4638฿
Hammered Aluminum Foil Rings
Popsicle Stick Folding X-Bow
Tool CarrierView Instructable »
Often we have 60 mph winds, and the dog leash swivel would be useful.
Mesmerizing Wind Spinner
Looks awesome. The arbotech turbo plane is a bit expensive though. I have some some sanding wheels that we used to get the plaster and drywall off some tile we were reusing, they worked fine. Took me the better part of 3 hours to carve all the ripples in a 36''x10'' bench top though.
It is a solid piece. Because walnut is such a soft wood I think I would have to use a wood hardener, to prevent scratches. But the metal would give it structual strength as well, so they wouldn't break.......
Perhaps, but the bandsaw would make the work go much faster and would be more efficient, if your were making them for mass production.
Chop-saw Stand Out of PalletsView Instructable »
I agree about the laser. A life-changer! I have 15" and the laser is offset a little to the right so all your wood to the right is perfectly the right length.
Flat-Pack CNC Modern Coffee Table
What You'll Learn
I made it and had a good time with my little brother. Thanks again!
Nice job isaylor. I have some leftover 2by6s and some walnut. I will try this IMMEDIATELY!!
2x4 End Table
Transforming Bar Desk
�Rodolph the red-nosed space shuttle� Heh
�Rodolph the red-nosed space shuttle�
Tools and Materials for CNC
Or if you have a bandsaw, cut the pieces before gluing, and it would go faster.
How to Make Wooden Rings With a Drill
Copper + Wood Rings
How to Build the SimpleBotics SimpleBot!