author
4Comments

Tell us about yourself!

  • Component Tester - Test almost anything !!

    Hi, are you using 8Mhz crystal?, i am using internal 8Mhz oscillator because i dont have an 8Mhz crystal.

    Hi Baweja, are you tried to measure an inductor? i dont see any in the pictures.

    Hi, are you using 8Mhz crystal?, i am using internal 8Mhz oscillator because i dont have an

    View Instructable »
  • Component Tester - Test almost anything !!

    You can see the fusebits in the file makefile for different oscillators:# ATmega328 / ATmega328Pifeq (${MCU},atmega328) HFUSE = -U hfuse:w:0xd9:m EFUSE = -U efuse:w:0xfc:m ifeq (${FREQ},1) # internal RC oscillator (8MHz) and /1 clock divider LFUSE_RC = -U lfuse:w:0x62:m # external 8MHz full swing crystal and /8 clock divider LFUSE_CRYSTAL = -U lfuse:w:0x77:m # external 8MHz low power crystal and /8 clock divider LFUSE_LOWPOWER = -U lfuse:w:0x7f:m endif ifeq (${FREQ},8) # internal RC oscillator (8MHz) and /1 clock divider LFUSE_RC = -U lfuse:w:0xe2:m # external 8MHz full swing crystal and /1 clock divider LFUSE_CRYSTAL = -U lfuse:w:0xf7:m # external 8MHz low power crystal and /1 clock divider LFUSE_LOWPOWER = -U lfuse:w:0xff:m endif ifeq (${FREQ...

    see more »

    You can see the fusebits in the file makefile for different oscillators:# ATmega328 / ATmega328Pifeq (${MCU},atmega328) HFUSE = -U hfuse:w:0xd9:m EFUSE = -U efuse:w:0xfc:m ifeq (${FREQ},1) # internal RC oscillator (8MHz) and /1 clock divider LFUSE_RC = -U lfuse:w:0x62:m # external 8MHz full swing crystal and /8 clock divider LFUSE_CRYSTAL = -U lfuse:w:0x77:m # external 8MHz low power crystal and /8 clock divider LFUSE_LOWPOWER = -U lfuse:w:0x7f:m endif ifeq (${FREQ},8) # internal RC oscillator (8MHz) and /1 clock divider LFUSE_RC = -U lfuse:w:0xe2:m # external 8MHz full swing crystal and /1 clock divider LFUSE_CRYSTAL = -U lfuse:w:0xf7:m # external 8MHz low power crystal and /1 clock divider LFUSE_LOWPOWER = -U lfuse:w:0xff:m endif ifeq (${FREQ},16) # internal RC oscillator (8MHz) not possible LFUSE_RC = # external 16MHz full swing crystal and /1 clock divider LFUSE_CRYSTAL = -U lfuse:w:0xf7:m # external 16MHz low power crystal and /1 clock divider LFUSE_LOWPOWER = -U lfuse:w:0xff:m endifendif

    View Instructable »
  • Component Tester - Test almost anything !!

    I made it works great!, except for inductance measurement, always show the same value. I am using internal 8Mhz i don't have 8Mhz crystal.

    View Instructable »