HOBBY TO MAKE

Just change all the cells in same configuration...Make sure the same configuration...Otherwise it can harm your laptop...

Your calculation is right .But I have opened more than 90 laptop batteries.Luckily i got many good ones.I use Imax b6 ac for calculating the exact capacity.i have some cells which can give 2500+ capacity.But you can also buy new panasonic NCR 18650B for greater capacity.So that will more than 36000 mah capacity.Thanks For Writing such a Detailed Analysis.

https://m.banggood.com/Dual-USB-5V-1A-2_1A-Mobile-...You can buy from above link best and cheapest

Thanks For The encouraging me.

There is nothing wrong try changing it

You have to configure remote view with DNSI will make one instructable and a YouTube video soon

Try follow each step of the video carefully

Try resetting the esp8266 by pressing reset button Then try all the steps Just double check you working usb data cable

Just follow the link given in YouTube video description

I recommend you to buy esp8266 with USB ..It may be very time consuming..

Just follow the video .Make sure each step is same as shown..Ask me after that

Thanks for the apriciation.

Just try to fully discharge your battery then connect your battery charger to laptop

Just give it a try..it may help

No it won't If your circuit it OK...That is why there are temperature sensors.. for safety...

2200 mAh are commonly used...But if you have 2600mah then use it..Don't use 700 mAh....

You can use any 18650 model cell found in almost all the laptop batteries..Actually there are 6 cell INSIDE each laptop Battery....Just make sure you don't damage your battery plastic cover and circuit because as you said you could not find any correct match for your replacement.....Just harvest 6 good cells from any dead batteries..And replace it with yours...one

And one more thing if your battery's circuit is dead then you have find the correct circuit replacement...Unless the connection may not work..

Very simple Just buy couple of more dead batteries make sure this time you buy same model batteries to avoid confusion Or If the circuit is dead then you can use other circuit from the dead ones....&If not, just use the correct cells in YOUR battery pack...(if the circuit is somehow detecting then this also will be solved).....

Brother voltage is not the criteria it is just rough estimate...You need to check the capacity of each cell using professional charger like IMAX b6 or any other.....but You can also check it by 2200 mAh power bank available easily for 100-150 .....Then you can finally say the total capacity of cell in mAh..The good to use for your laptop are above 1500 mAh ...For for detail Check out my channel on YouTube https://www.youtube.com/waqaralamlive&https://www.youtube.com/hobbytomake

Watch the full vid....for step by stepThen ask me if you have any questionshttps://youtu.be/O_rcJn3QgTA

It is for those who protect there gallery etc...Well thanks for the comment.

YesIf your wireless adaptor is not working...

Yes,4+2=6gbMost of laptops have 2 slots not 2+2 it depends on the motherboard of pc....For the correct configuration for your motherboard Follow the link of crucial ram website mentioned in above steps....I'm using this for months without any problem

Thanks for the lovely comment

Thanks for this response...

Yes, you are right but I am using it for very long time.But you are right it is dangerous that is why I have created another project..https://youtu.be/Tj6n92I5R88You can check this out

My friendI have placed inside some shock absorbing materials.For circuit protection.

Yes ,It will surely chargeBut how much capacity of cell is different questionWhich can only be known by capacity testing (which you can find on my YouTube channel WAQAR Alam)https://youtu.be/WohHiMq4scA

(Sorry for so late response)Yes ,If you connect it properly by soldering or spot welding.