Tell us about yourself!
Water heater tank wouldn't last very long, the steel in them is very thin. I guess as long as you did something to make the part where the charcoal goes, thicker, it would last longer.
That makes me glad I never had children.
Actually, the correct response would be "No, but I like that smell......" Saying Yes, says that the washing DOES remove the smell, based on my how I worded my comment.
Sorry,. my bad.
You are both sick, lol. I worked in a full service Gulf station in the 70s, and patched a LOT of tubes and tires. Didn't take long to get sick of that smell.
I wonder if washing and rinsing them gets rid of the horrible smell inner tubes have.
In TN, any water craft that can be propelled by ANY other method than JUST oars, requires registration. And that even includes electric trolling motors.
Being a mechanic since the 70s, I have thousands of dollars invested in tools. So, I'd just use a socket, extension and ratchet. However, I also can appreciate well made tools and it looks like you did an excellent job building that one, looks professional enough to have a name brand on it!
Boy you SAID it! HobbyKing takes forEVER to ship, won't ever buy from them again.
You can also coat the contacts with silicone grease, that helps keep corrosion from coming back.
I agree and I am an RC folk. However, I have this same drill and I don't think the case is large enough for the 18650 batts. I will have to check, as I rebuilt it years ago with the same Sub C batts the factory uses, but now they have already gone bad.
Thanks, found some 1M cheap on Ebay, looking forward to building this.
Well, duh, that's what dust masks are for. But to keep from breathing harmful chemical fumes, a more expensive, respirator is required with filters rated to filter either general fumes or specific fumes, and only for specific periods of total time. I worked at Olin Chemicals years ago and we all had to carry an emergency respirator that was good for only a few minutes, until one could get to safety. And, it was designed specifically for Chlorine gas.
Maybe you should say, or have said, a "car" battery charger. Battery chargers are NOT always 12 volts. I have plenty of batteries, even some SLA ones that are less than 12 volts. Your method of removing rust certainly is interesting, but I prefer a soft wire wheel on a bench grinder or drill. A lot faster, less trouble and less mess.
I'm sure our preservation librarian would have something to say about people putting baking soda in our books.
Don't forget the little bleed hole in the lid, if you put enough ice in the lid to cover that hole, then non distilled water will drip through that hole when the ice melts and contaminate your batch of distlled water.