Tell us about yourself!
Basic Electronics Skills for Robotics
Getting Started With Robots
Yes, it's phantom forces in the background.
Thanks for the comment ;)It all depends on the sensitivity of the mouse, you can change this parameter on line 190 of the code. (by default: mouseSensitivity = 10) If you increase this number, the character of the game will turn his head faster. Currently when I turn the head 45 degrees, the character turns his head 90 degrees. However, each game is different so the setting(mouseSensitivity = 10) must be changed for each game. I hope I helped you :)
Control Your Computer With ...View Instructable »
Connected SwitchView Instructable »
Prototype With PCBWayView Instructable »
When there is a lot of water pressure, you can easily run a small generator.
Marble Machine Made With Co...View Instructable »
I can't answer your first question (I have no idea, sorry) ;)You're totally right about the technical point. I misspoke.
The water chamber isn't watertight. The first prototype I made was watertight, but the water chamber was full of water and this prevented the turbine from turning properly. So I drilled 3 holes on the back of the water chamber. (You can see these 3 holes in the last image of step 1).
Thanks for the comment, I've just add a video in step 2 :)
3D Printed Water MotorView Instructable »
Thank you for the comment. It is possible that the screwdriver is a little stuck at the beginning. It is normal if it is necessary to force a little bit at the beginning. :)
Thank you very much for the comment and the photo!!! I am very happy that you like this object and that it works correctly.It's a good idea to use magnets to hold the bits. :)
Thank you very much for the comment and especially for the photos. It is a good idea to have added the letters F and R. Again, Thank you!
3D Printed Ratchet Screwdriver
You're totally right :)
Thank you very much! :)
Thanks for your comment.
3D Printed Ratchet ScrewdriverView Instructable »
Next Steps for Photography
Make your first PCB.
A simple electronic game
Thank you very much. I have to admit that I a little used Google translate :).
Thank you for your comment. :)
Iphone dock made with pista...View Instructable »