Johnson Selva

Sorry for late...I Hope the below code works. let me know.../*PINOUT:RC522 MODULE Uno/Nano MEGASDA D10 D9SCK D13 D52MOSI D11 D51MISO D12 D50IRQ N/A N/AGND GND GNDRST D9 D83.3V 3.3V 3.3V** Include the standard Arduino SPI library */#include /* Include the RFID library */#include /* Define the DIO used for the SDA (SS) and RST (reset) pins. */#define SDA_DIO 9#define RESET_DIO 8int card=228; //use first three digit of your card instead of 228/* Create an instance of the RFID library */RFID RC522(SDA_DIO, RESET_DIO); void setup(){ Serial.begin(9600); SPI.begin(); RC522.init();}void loop(){ byte i=0; byte j=0; byt...

Sorry for late...I Hope the below code works. let me know.../*PINOUT:RC522 MODULE Uno/Nano MEGASDA D10 D9SCK D13 D52MOSI D11 D51MISO D12 D50IRQ N/A N/AGND GND GNDRST D9 D83.3V 3.3V 3.3V** Include the standard Arduino SPI library */#include /* Include the RFID library */#include /* Define the DIO used for the SDA (SS) and RST (reset) pins. */#define SDA_DIO 9#define RESET_DIO 8int card=228; //use first three digit of your card instead of 228/* Create an instance of the RFID library */RFID RC522(SDA_DIO, RESET_DIO); void setup(){ Serial.begin(9600); SPI.begin(); RC522.init();}void loop(){ byte i=0; byte j=0; byte k=0; int ID; if (RC522.isCard()) { RC522.readCardSerial(); Serial.print(RC522.serNum[i],DEC); ID=RC522.serNum[0]; Serial.println(" "); if(card==ID) { digitalWrite(13,HIGH); } else { digitalWrite(13,LOW); } Serial.println(); Serial.println(); } delay(1000);}

sure it will but not all the arduino boards support multiple RFID reader. RFID reader uses master slave connection so if an arduino board have 1 master and 2 slave ability you can connect 2 Reader at a same time. for example with arduino mega you can connect up to 4 RFID but in arduino uno only one is possible.

the number of values send from arduino and number of variables in processing must be same in count..for exampleif you are sending a single value like 12 the array in processing should be a[0], if the values are 12,43 the array declared should be a[1] that is you must use all the array space you declared.

welcome dude..

sure dude will upload in days and will surely notify you through message...

its simple dude you can do it by using iterations.

will you able to send me the code and screenshots of the error via mailcheck your inbox you will find my mail ID there/...

Sorry for the late response anjali . i have a solution for that if you are still facing the same problem let me know i will help you for sure... for that you need to tricking the IDE. will add the tutorial soon today..

sure it will but you need some changes in the code about remote configuration as same as your normal java program.

Glad you are here dude. thanks for your valuable comment.

Thanks for the info man.....

will you able to send me your code.. so that i can examine and help ...

tanx for your valuable feedback dude... really happy that you made it...

Dude don't solder the wire directly pin goes first or you will face lot of problems... sorry for late reply...

you need to use writable card so that you can write data on cards....refer the tutorial here https://goo.gl/UWyvGq

Sure you can but you have to focus on master slave connection....

Bro its there on my tutorial above step 1...

its there on my tutorial above step 1...

Yes it is both are nearly same...

65 is a mapped buffer value dude you have to convert it to temperature....

use processing IDE 2.2.1 it will work perfectly...

just use the older version which is compatible dude...

No you can't if you change the pin numbers RFID will not work as it needs master slave connection....

Thanks For Your Comment Buddy...

oh that's a serious problem i can't figure out whats going on really sorry...

Sorry brother i don't have knowledge on visual Basic so i can't help you i think....

Sry for late check out what board you selected on the IDE... go to tools->board then select your board.... i think it will help you... honestly i cant able to figure it out the problem exactly as its hardware based,...

Sry for late response. For achieve your goal you need to use database to map the rfid uniq value to a map read the below supermarket tutorial its very simple ..https://www.instructables.com/id/Simple-Supermarket-App-Using-RFID-RC-522-and-Ardui/

use array to store value like below ..//its not complete code its just an exampleint productname[5]={0,0,0,0,0};void setup(){}void loop(){for(int i=0;i<5;i++) { productname[i]=RC522.serNum[i]; }}

or create a integer as belowint value;value=RC522.serNum[1];

OMG honestly i can't able to figure it out whats going on...it may be problem with hardware i think but i'm not sure sorry dude

Sure bro Gud luck on that...

brother it seems the library is not getting initialized for you because of version incompatibility. just try "Arduino 1.6.11 IDE" and let me know if it works. it seems everything is good on your side :-(

sure will you able to send me screenshot of the code and clear photo of your connection . so i may able to help you easily...

Well done bro...

mail me everything at joshstaivin@gmail.com with Subject as Arduino

Will you able to send me the screenshot and your connection photo.... ???

Wow thats great dude...

Wow nice one... will you please send me the code so that i can try...

Wow nice one... will you please send me the code so that i can try..johnsoninboxx@gmail.com

Awesome work brother. glad you make it perfectly... :-D

Tanx Bro...

I think we can only read data and cant write anything...

nice work dude. I'm Glad you made it ... :-D :-D

yes you can but i did not tried it before but its possible i think by using master slave connection in Arduino Mega....

Actually the range that you mean, it doesn't depend on the code. it only depends on the hardware you use. try suitable module other than RFID-RC522 if any available in the market...

Both NFC and ID cards works fine for me... what range did you mean brother tag ID value ?? if yes try changing loop value as for(int i=0;i<10;i++) instead of i<5 . . .

mmm sure my friend i will try that....

Wonderful idea dude...

Tanx dude ask me if you need anything...