Katod

As for me, best way to repair guitars wood part it is glue with good Polyvinyl acetate glue. You can send me a photo and I make an advise.

thank you very much

1. This part exists inbox of the rear bridge. 2. This polymer I found near the recycle bin. I build a guitar from recycled materials. Old cellphones were built with this material. It cols 'Carbolit'. You can use bone. Once I took the bone from a dog, and make a nut with it. Bone is better.4. Fret wire I bough in the musical shop "struny.ua". https://struny.com.ua/product/sintoms-210128seh-l... . It is weird to buy something in the USA (looks like you from there) from Ukraine.The capacitor I took from old power block. Advice. To better ergonomy, you have to set electronics to the right side (or bottom side, when you hold it). Because when you play you sometimes touch it and change the volume.6. The hook I made from wood and glue to wings. If I build now, I will make wings from h…

1. This part exists inbox of the rear bridge. 2. This polymer I found near the recycle bin. I build a guitar from recycled materials. Old cellphones were built with this material. It cols 'Carbolit'. You can use bone. Once I took the bone from a dog, and make a nut with it. Bone is better.4. Fret wire I bough in the musical shop "struny.ua". https://struny.com.ua/product/sintoms-210128seh-l... . It is weird to buy something in the USA (looks like you from there) from Ukraine.The capacitor I took from old power block. Advice. To better ergonomy, you have to set electronics to the right side (or bottom side, when you hold it). Because when you play you sometimes touch it and change the volume.6. The hook I made from wood and glue to wings. If I build now, I will make wings from hardwood and wings and the hook will be one part for strength.I think I have to rewrite this article, because it don't have fool list of materials. And I want add part where I write what I make wrong.

1. this part included. I attach the photo.2. For nut, I use thermosetting polymer which uses in high voltage electric frames. It is very hard and looks cool.3. The bridge is technological enough. String tension stays in tune. Only one thing is a compromise, I don't know to call that in a different way. The saddles are little drums mount on side of weel. If you want to change the high of string you change the scale. Because you rotating little weel. But this weel fixed with screws and it fixed where you fix it. Ask anything you want.

Thank you for the question. Secure, you mean, Is this mount safely?The detail is L-kind, and angle of it less than 90 degrees. It works as a hook. Sсrew has not any power function.The rear bridge mounts on 4 screws. To make it stronger on the back of the front cover I glue little bar.

thank you :)

thank you. I like its to.

Great!very cool when you make up some technology when you not have some instruments

this is my favorite ornament of this year :)

Thank you! I try to do my best :)

Thank you for your comment! I am very glad to read this. Also, it is glad to see that you notice a lot of technical solutions.Every technical problem have a solution, just turn on your imagination

Thank you a lot. I always try make something unusual.Like some sad " And now something different". And this is it :)

Thank you for comment! It is vary plesent to read comments like

thank you! It is very pleasantly to read :)

Thank you!I try to do my best

Great job! Acoustic guitar is always difficult than electro guitar. Do you like the sound?As for me, you shouldn't use the pine for neck for few reasons. Pine is no hardwood, that's means you will lose high frequencies. Also you make cut that fretboard parallel to age lines of tree, tree harder band when age lines perpendicular to area of banding, than it parallel. I mean, you add strings to have more high frequencies, but you can loose some on mechanical issue. But, maybe the oak will compensate it.Anyway, it is great job, and every guitar have it's own unique sound. And I have pleasure reading it.More guitar - more happiness :)Don't stop, make more :)

I know. I am working on learning english.Next time i will send you, if you dont mind :)And thank you for comment

thank you :)Lets start!It will be first band which create handmade music :)

How it sounds?When I was a kid, in old cottage I take all old tools, saucepan, diches, take handmade drum sticks and make noise and sing.It is drum set from my childhood :)

Thanks a lot! It's wery playeble bass :)

Hi. Thanks a lot for this comment.I can make another one converter, but it is very simple. I will send you a few photos of this.

It's wery nice, make electrolise.Interesting notation about graphite rods, with this electrods you loose some oxygen. Because graphyte is carbon, and in result you have hidrogen, oxygen and carbon dioxide. Hidrogen is little bit more then you need for reactoin with oxygen.I use graphite from used butturies when I was a student :)

When I was school student I made a lot of Oxygen and Hydrogen by spliting water.And I make a lot of explosions. Actual, for better reactions you need the battary acid (acumulator acid, low concentration of sulfuric acid ), lead (Pb) for electrods. And powerphool power block, I build for 24 v.Maybe later I will write some when I make this with my son.And you can grow in your experiment

Robots already control us by wi fi. Sweet taste of revenge :)