Michalsky

Hi i am not an expert with fritzing i just created pdf and printet dem out If you explain me how to create the files With fritzing then I will try

Hello,I will check when I have time because I am working on another project I will tryIf you find some improvement for the code just let me know

Well the code works very well for me, but very good to know if you have some improvements in the code, just test it with your hardware

I don't know why you can't see it, it is working

Hi, the link is working

Hello you are right, sorry I mixed up the libraryUnder step 5 you will find the library and an example of it

This is a library you have to add you can download it from link belowhttps://www.arduino.cc/reference/en/language/funct...

https://www.ebay.de/itm/Manipulator-Roboterarm-6-D...

This is only the cheap versions prototype I am working on a new Robot arm with steppers more accurate and smoother

The Algorithm has an Chess ELO os around 2000 so always lose ;P

Schematics are nor in higher resolution sorry for the delay

Schematics are nor in higher resolution sorry for the delay

Hithere is a code "_8x8x8_RGB_CUBE.ino" on step 10put one of the functions in the loop() to test the cubeFor example:void loop(){edges(0, 1000); // it will turn on the edges in white (color 0) for 1000ms}All steps are explained in the videos

ok now I understandI dont have this code anymore because I wrote it temporary only for the test and didnt save itbut you can find lot of instructables for RGB leds if you are not sure how to do thisI found one interesting here with wiring and code:https://www.instructables.com/How-to-use-an-RGB-...If you have any other question let me know

Hi, on step 10 there is a zip file with some ino files insideopen the _8x8x8_RGB_CUBE.ino from your arduino software