Tell us about yourself!
Thanks a lot for the info! Will surely try this.
It worked with a 3.3V voltage regulator!! Thanks a lot!
Hi, To check the possibility of esp8266 burning out, i bought a new esp module today. However, exact same problem persists. Following are the connections that I have done:ESP GND -> external GNDESP Vcc -> external 3.3VESP RST -> external 3.3VESP CH_PD -> external 3.3VMy external source is a 5V power source with 2A current rating. I have used three 1k resistors to get 3.3V. I had also checked the voltages with multimeter before connecting to the esp module. All tge voltages were between 3.27V to 3.3V. I am really stuck at this and I'm not understanding what am I doing wrong. Please any help would be greatly appreciated!