Tell us about yourself!
Making a set of these as rollers to hang a boarding ramp underneath a house boat. Using a different diameter and style, but will upload pictures when finished and installed. 2" sch 40 pipe, 3/4" sch 40 pipe, and 13x 1/4" pex type C pipe as roller bearings. All fits perfectly. Will be cap drilled for the 3/4" pipe to extend beyond the 2". Then have caps and stainless nut and bolt on the 3/4" cap. Will be mounted on a custom bracket from aluminum sheet underneath the boat. Thanks for the idea assist!
Making Leather Patterns
Free the Rope
Orca or Yeti Cooler Wheels
I’ve found that it depends on the height of the bottle. If you’re using Longneck bottles like corona etc., you may have to adjust the width of the hole to fit the neck. Standard sized bottles work fine and the lid opens freely. With longneck bottles, you may need to feed the first two bottles closest to the hinge into the lid first. Then the other bottles close easily. Even saying that, longneck bottles are only going to catch around the top 1/2”-1” of the neck. So you still have the ability to put ice in around the bottles.
Japanese Mirror Frame
Thanks! I used vinyl decals and used them as a stencil. The nice part is that it is all adhered to the device and not just taped on like a standard stencil so there's less overspray. (Unless you forget to move the lids away in my case) haha.
Cheers! Also, I got some of the new Budweiser Repeal Reserve short bottles for the other box for a friend and they JUST fit under the lid. You can fit 8 short bottles if you already had them cold and didn't need ice. All those short bottles are around the same height Bundaberg Ginger Ale, Coors Banquet etc.. just have to try to see if the lid will shut without bending the lid.
Ammo Can Bottle CaddyView Instructable »