Modify the HC-05 Bluetooth Module Defaults Using AT Commands
Welcome & Supplies
Introduction to Electronics
Six Sided PCB LED Dice With WIFI & Gyroscope - PIKOCUBE
Considering that I'm powering the Arduino with the same battery, it already shares the Gnd without adding any extra cables. I could have mentioned it but I probably forgot
So the result would be degrees per second... I could use the MPU6050 to get the change of angle and then divide it by the time gone by. Should that do the trick?
I´ll check if there is a function to get that with the MPU6050
Do you have any idea on what should I change?
I´m planning on building it with an MPU6050 but using an Arduino. In the single-axis code, does the line "rz = ( (L3GD20_read(0x2D) << 8) | L3GD20_read(0x2C) )" get the current angle? Because if the "answer" the Arduino gets from the L3GD20 is an angle expressed in degrees, I could more or less adapt the code. Do you know what output is obtained?
Another thing... what is the difference between motors with different number of magnets in their rotors? Because I have 4 BLDCs with 12 slots (or whatever they are, they are the metal thingies with the windings), but two have 16 magnetic poles (8 N and 8 S), one has 12 (6 N and 6 S) and the last one has 6 (3 N and 3 S). Should they work? I got my L298s today.
Interfacing an Arduino With a Mouse Sensor (ADNS-3050)
Arduino Text LCD Animation
The Best Arduino Boards for Your ProjectView Instructable »
Arduino Drone | Quadcopter (3D Printed)
Just tried logging out and in again and it works!
Same bug with me! Tried Chrome, no change! Please help!
3D Modeling Workflows
3D Scanning Class
Cleaning Up Your 3D Model
Turning Your Photos Into a 3D Model
Mash Up Arduino Code Samples
The Ultimate Guide to Building a Quadcopter From Scratch
The Making of a DIY Brushless Gimbal With Arduino
How to Make a Picoballoon
UCL-Embedded - Arduino Door Lock
3D Printed Maze Controlled by Your Android Device
Colorizing Old B&W Photos and Videos With the Help of AI
Q-Bot - the Open Source Rubik's Cube Solver
Sardauscan Sub-30$ Opensource 3d Laser Scanner
Build a 30$ Laser Scanner
I made it! Really Good!
Shooting for Photogrammetry
Understanding 3D Scanning
Wiring 3D Printer RAMPS 1.4
Not so sure about reviews on Apple version. I think the Android version is better than its counterpart
Tools and Materials for 3D Scanning
Giant 3d Printer for Cheap!
Tripods and Supports
Made use of my tripod during the Lunar Eclipse!
Made use of the tripod during the Lunar Eclipse!
Lovely Project! Happy Valentine's Day to everyone!
Hacking Servos to Serve Your WayView Instructable »
Arduino LCD Game
Sorry about that! Will edit as soon as possible! Any Serial Terminal ones?
Easy Cardboard Model Airplane
AT Command Mode of HC-05 and HC-06 Bluetooth Module
Interfacing Any Arduino With a CellphoneView Instructable »
Modules and Shields
Holding the Camera
A New Year's night at a friend house. Used 15 second long exposure and got this beautiful picture to remember that day
Choosing a Camera, Tools and Supplies
Important Camera Settings
Getting to Know Your Camera
Basic Electronics Skills for Robotics
Getting Started With Robots
Motors and Motion