PotatoDemon

Looks good!

Thanks! I don't like the NAR a whole lot myself but I figured I might as well make an Instructable.

I can't believe I missed this! Looks neat! Is there much of a difference in performance compared to your TR8-2020? I guess I need to get the K'nex bin out.

Neat idea but you could use more information about how you built it. Pictures only help so much without words.

Good concept but you need better step names and also explanations of how you do each step.

Try changing the bands that you use.

You clip it on the rod that’s the mag and stretch the band on the individual projectiles on the front of the barrel. A lot like a rubber band gun.

Looks alright, just not very powerful due to the limited length the pin can be pulled back.

Looks interesting.

Looks neat, my melee in k’nex wars is a short K’nex knife with a white connector handle that shoots yellow or blue rods using a block trigger. These are probably better.

Is it okay if I use the stock and trigger from this in my NAR-2020 instructable? I’d give you credit.

This looks like it could be modded to be MUCH stronger and take like 5 #64’s. Reminds me a lot of the TR8 (best k’nex gun imo).

Late reply but you’re sure that those are #64’s, right? Also, don’t use the “pure gum” ones for K’nex guns.

Late reply but it’s just a bigger TR-18 turret with a big yellow gear in the middle instead of wheels.

NO MORE BLOCK TRIGGERS!

Not to be a jerk or anything but adding the barrel is so easy a monkey could do it. Oh and it reduces performance. Isn’t even a mod except the glue...

I love it! Not too piece heavy either.

Maybe just the middle and outer layers. I connected all the parts on the stock.

Yes, provided it is attached to a working TR-8.

A thumbtack and pliers would probably be better.

If you don't have a BBQ lighter, wrap the end of a skewer in paper towel or something similar and secure it with tape. Next, dip this into the stove after you pour the fuel in. Light the end of your makeshift torch and dip it into the your stove to ignite the fuel. The paper towel acts as a wick for the fuel and as long as you extinguish it after each use, this torch will last a while.

Thank you! That is very useful and good to know. The thing is, it can be extremely difficult to deal with foreign (in this case, Chinese) scams due to the distance and the fact that they can simply get rid of the company name they have currently and go under a new one.

I can see some resemblance to a pole-axe, but I think it’s more of a warhammer. I’m glad you liked it :).

Don’t hit Maude Flanders!

Does anyone know if white glue works?

Looks good, I’m gonna build it today! I’ll let you know how far it shoots.

I had to modify it slightly because the tip of my ram rod broke off for some reason but it still works great

Yeah, it’s a bit hard to make the fin ammo perfectly. In case you’re wondering, 9 rubber bands is the limit on the pin (mine broke when I put 8 or 9 on it).

Sure, I’ll post a couple pictures tomorrow. Definitely one of the best knex guns. Is the range on this one the same as the TR-18?

I really like the trigger on this one, much more reliable and it has less friction

Cool! It looks a bit like a mini potato cannon.

Here are some good ones: this one is good if you don’t have too many pieces https://www.instructables.com/knex-pocket-pistol/ this is a good one if you want range, power, and reliability. The piece count is a tiny bit height but it is worth it: https://www.instructables.com/TR8-2013-last-updated-07192013/These ones are good shotgun pistol things: https://www.instructables.com/Full-auto-knex-uzi-instructable/ https://www.instructables.com/S10-Knex-Shotgun/This one is a pretty fun one if you band the triggers and ram rods separately, if you do this, it allows you to fire two shots without having to pull the pin back each time (you still have to do it after though) https://www.instructables.com/Knexfreek-Hell-Slayer/ If you have a whole lot of k’nex, build this or the SRV2: https://www.instr…

Here are some good ones: this one is good if you don’t have too many pieces https://www.instructables.com/knex-pocket-pistol/ this is a good one if you want range, power, and reliability. The piece count is a tiny bit height but it is worth it: https://www.instructables.com/TR8-2013-last-updated-07192013/These ones are good shotgun pistol things: https://www.instructables.com/Full-auto-knex-uzi-instructable/ https://www.instructables.com/S10-Knex-Shotgun/This one is a pretty fun one if you band the triggers and ram rods separately, if you do this, it allows you to fire two shots without having to pull the pin back each time (you still have to do it after though) https://www.instructables.com/Knexfreek-Hell-Slayer/ If you have a whole lot of k’nex, build this or the SRV2: https://www.instructables.com/SR-v1/These are just some of my favourites, there are plenty of good k’nex guns I didn’t cover here because I don’t have time to find them all.

Good point. All I’m saying is there was once a good community and now it’s MOSTLY (not completely) gone.

Wow! That looks pretty cool! I’ll try to build it based on the video. If I do post the NAR, I’ll probably include ~Aeronous~’s mods.

Thanks! I didn’t know you were still on instructables. I’m looking forward to seeing what you have in mind. Should I make a tutorial on how to make the full size NAR?

The way you use it reminds me of an improvised shotgun (slam fire). I think I’ll build this to add to my ever-growing arsenal of plumbing aisle weaponry.

Maybe if the foregrip slid backwards and bumped off rubber bands in notches in the front of the barrel.

Nice Thompson! It would be cool if you modded it and made it into a rubber band gun.

Yeah, I’m trying to make one with baffles but it’s hard because the only power tool I have is a drill.

THIS is the untangle. I like this version a lot too!

Thanks, it works somewhat well but I am working on improving it. It was made mostly from scraps and stuff I had on hand so if you made the outer tube 2” pipe it would work better.

I tried a dowel at first but it didn’t last as long (I might try a stronger one though). Perhaps an aluminum rod might work a bit better because of the lighter weight. I used a modified piece because I only have 2 ball sockets and I happened to have a damaged orange connector lying around.

Oh and the bigger the bomb the bigger the fuse should be for safety reasons. For example: you trip while running after lighting it.

Just look on the ground behind your local grocery store

Would I be able to use a railroad spike (or even the tracks!) instead of an anvil?

Will spruce work for the stock/body? And does it matter what kind of wood the dowels are?

Same. I’d rather pull the pin by accident then not be able to use it in an emergency (this is coming from a pyromaniac).

A needle would work too.

I’ll post how to make a bard with any type of solder eventually �

I’ll post how to make a bard with any type of solder eventually :)

ikr