author
3CommentsJoined November 28th, 2015

Tell us about yourself!

Complete Your Profile
  • RogerG16 commented on RogerG16's instructable Shop Vac Sawdust Cyclone Seperater1 year ago
    Shop Vac Sawdust Cyclone Seperater

    I use this on my saw and router table. It does a great job.

    View Instructable »
  • Mobile Workbench With Built-in Table & Miter Saws

    Try this diy sawdust collector. Built it myself with a shop vac two buckets and some pvc pipes. It saves the vac filter being cleaned . Two buckets with a hole between the two. Top one had a side inlet for the sawdust coming in and the the vac is attached to the top using pvc pipes . Screw and silocone this one ind or it willcome apart. The top cross piece pipe is just stuck in no glue. To take it apart , undo the Bungie cords holding the top bucket down. Piece of cake to make and works great. The top bucket has a hole dia of the pipe being attached and is attached using Sink Drains with the metal sieve removed. Glued and screw these together one in side and one outside for support and keep the outlet rigid.or they will come apart.Use a v shaped collector under your saw. wit...

    see more »

    Try this diy sawdust collector. Built it myself with a shop vac two buckets and some pvc pipes. It saves the vac filter being cleaned . Two buckets with a hole between the two. Top one had a side inlet for the sawdust coming in and the the vac is attached to the top using pvc pipes . Screw and silocone this one ind or it willcome apart. The top cross piece pipe is just stuck in no glue. To take it apart , undo the Bungie cords holding the top bucket down. Piece of cake to make and works great. The top bucket has a hole dia of the pipe being attached and is attached using Sink Drains with the metal sieve removed. Glued and screw these together one in side and one outside for support and keep the outlet rigid.or they will come apart.Use a v shaped collector under your saw. with a hole on one side 2.25 dia or to fit your vac hose. Should get about 98 % of the dust .

    View Instructable »
  • RogerG16 commented on Confounded Machine's instructable Table Saw Station3 years ago
    Table Saw Station

    Hi I took your layout idea and did something similar for myself. Trust It passes muster.

    View Instructable »