Tell us about yourself!
A Wooden Dog LED Lamp
DIY Custom Branding Iron
Cantilevered Glass Holder
State License Plate Sign
How to Make Diy Cage
Leather Notebook Cover
Wavey American Flag From 2x4s
Upcycled Trash Solar Garden Light
Make a Small Parts Organizer!
I wonder if a sheet (or sheets) of crumpled flat aluminium kitchen foil attached as a last layer on the underside to reflect light back in might help? Maybe the crumpled effect might help to break up the diffusion pattern yet reflect enough light around the full interior without adding much weight at all. I have no idea if this would work but just thought would throw it out there....
MOBILE WORKBENCH UPGRADE
was thinking that you could also engrave a pic or wording onto the tile before you put it all together to make a nice memorial/keepsake for someone who has lost a pet or loved one (which in my case are the same ;-) ) the light would then reflect off of that as well. just an idea i had...love this project. I also wonder if you could add essential/fragrant oils to this e.g. lavender so it could give a nice aroma as well without interfering with the flame??
DIY Dremel Sanding Bands
DIY Vacuum Clamp With Toilet Parts, My Best Shop Jig!
Swiss Army Key Ring
Best DIY Dremel Sander Ever
The Wrong Way to Make a River Table
i'm just starting to set one of these up using a plastic tub as the cabinet type set up. do you need to have a vacuum system operating to keep the air clear with the eraser or just an air filter would do??
thank you for this instructable, i would like to make one of these asap. just a couple of questions - 1) what size tub are you using ? 2) what sandblasting media and grit are you using for blasting glass? and 3) what automotive filter are you using? One idea I had for the gloves was after you wrap the blue painters tape around them on the flanges - you could also perhaps using pipe clamps over the top of them to secure them tightly on? - I havent tried this of course but just wondering in case you needed some holding power for them. Thanks again - i'm looking forward to getting one made!
DIY Sandblasting Cabinet and Etching Glass
DIY Sand Blaster $50 in an Hour
Making a $70 Glass Etching Tool for Less Than $10 Comparable to the Air Eraser
Etching on Any Surface Cheaply and Without the Use of Chemicals
Welding Tools and Materials
Welcome to Welding
fabulous job and great instructional too. Thanks for posting this :-)