Tell us about yourself!
Hello Thank you for all this information. But i am getting this error. Please help me with that.C:\Program Files (x86)\Arduino\libraries\RobotIRremote\src\IRremoteTools.cpp:5:16: error: 'TKD2' was not declared in this scope int RECV_PIN = TKD2; // the pin the IR receiver is connected to ^Error compiling.
I tried all the steps but still attiny2313 is not in boards of arduio. What should i do.
Thank you bloke i will work on it.Thanks again for all your help.
Hello blokeThank you for the help. Your reply is very help full.Just one more question, I m just trying to use remote to control the fan, i used the IRremote library. The fan control & IR communication is working well seperately. But when i merged the program IR sensor took garbage values. Its look like arduino got too much busy with Zero crossing detection loop.
I used the fixed dimming values for 0,1,2,3 buttons of remote in program. For example for 3 i used dimming=15 which is the highest speed of fan. For 2 its 80. I got that values from trial & error.
As i am still testing so it is on breadboard.The humming sound is coming from fan ( it's a table fan). The circuit is working quite better as compared to just PWM but some what humming is still there from fan.Also the 30k 1/2W resistors are heating when fan is turned on.So should i use higher wattage resistors or any other option.
Hey BlokeThank u for all this information is really help full.BUT i want to control the fan speed.I used this circuit & program & its making humming sound. So is there any option to reduce that or any other circuit for that?I already tried snubber circuit but no use of that.So please help me with this. Thank You