Tell us about yourself!
Industrial End Tables
DIY Miniature Gasoline Generator
Benchtop Micro Milling Machine
Homemade Tin Can Turbine With 3d-printed Compressor
Portal 2 Turret Gun
Tapping Fixture for a Drill Press
Homemade Fly Cutter - From Scrap Steel
How to Flatten Boards With Just a Planer
Scrap Wood Cell Phone Amplifier
The copper will get softer if you quench it in water after you heat it (the opposite of what steel does when quenched). Also, you can buy something called "pickle" that is meant for jewelry that will take the oxides off very easily.
Stainless will be a lot harder to work with but it won't rust. It's really up to you
How to Make a Pair of Scissors
Making a BEAUTIFUL Ring Box!!
Sanitary TIG Welding 101: Flask Fabrication
Chainsaw Mill Build, Use & Tips N Tricks
Press / Brake and More..
Tubing Roller-Bender From Scratch
Simple Versatile Corner Clamps.
Start a Fire With a Hammer! (Strike Until Its Red Hot!)
Anvil Holdfast for Hardie Hole
I actually bought a 90 amp flux core welder from them about 2 years ago. It works great, no major problems with it. I only just bought a new welder because the harbor freight one was underpowered for me
Bluetooth Door Lock (Arduino)
1000W Portable Induction Heater
I think I like the Imgur post better... Awesome job!
Pallet Wood End Grain Coasters
Drill Press Vice
Mid-Century Modern Walnut End Table | How to Build - Woodworking
Ribbon Box With Candy Cane Striped Inlay
Krispy Kreme Donut (Doughnut) Recipe
Manual Bar Bender / Scrolling Tool
How to Make a Portable Bandsaw Table
The galvanized is worse than the carbon dioxide because you breathe in CO2 all the time and as long as it isn't in huge quantities it doesn't matter, zinc fumes will give you welders lung, which is a lot like the flu, but much much worse.
Bolt Together 2 X 72 Belt Grinder
Lock Picking Tools From Scratch
I actually tried forging on this with a 4lb hammer a few days ago and it worked excellently! I made the hole in the stump tight enough that it actually didn't move around. Another reason I'm a little tentative about doing that is because I made another anvil tool that can fit into the stump. If I fill it with lead, I won't be able to get my anvil out and my fuller in.
Thanks for the info! I actually used a piece of railroad track before I made this one, and before that, a little cast iron anvil that I believe came off of some sort of vise. Before that I just used my bench vise. This one was just my thinking of "Oh I have a bunch of huge heavy chunks of steel, why not make an anvil?" I actually only spent about 2-3 days working on this and it was all done for free.
How to Solder Copper Pipe
How to Make an "anvil"View Instructable »
Metal Heart Candle Holder
Milling Short Logs on the Bandsaw
3D Printed Lathe
How to Make a Log Splitter - Kindling Splitter
How to Make Retractable Casters!
The Pallet Bible: Finding, Inspecting, and Dismantling Pallets
How to Make a Huge Fabulous Mega Anvil
Make a Ring With Hardwood and Silver or Copper
How to Make Amazing Choc Chip Cookie Cheesecake Bars
Campfire Biscuit Treat Sticks
Caliper From Wire Nails
lol I'm a freshman in high school and I just finished making a new forge that I accidentally melted steel in. But I get the fact that your parents don't like fire, mine are always nervous but I always have a bucket of sand, a bucket of water, and a fire extinguisher on hand
Yeah, I used a simple venturi propane burner and I upgraded it to a forced air burner with a hair dryer, and was using it in a forge like the king of random's, then I upgraded that with refractory in an old helium tank. Good luck on your projects too and I already watch Man At Arms: Reforged as well as a ton of other maker people on youtube like jimmy diresta
Heat treating isn't really that hard, if you have a lot of patience you can use a blowtorch, or dig a hole in the ground with a hairdryer going into it, build a fire and it gets plenty hot. When it gets to a temperature that it is no longer magnetic, dip it in canola oil for about 8-10 seconds (usually preheated oil with another piece of steel) then let cool. After that, just temper it and it should be hardened.
Knife From a Rasp
Bike Analog Speedometer
Viking Bearded Axe (Skeggox) From An Old woodsman Axe
Portable Bandsaw Metal Stand
DIY Sheet Metal Bender Brake
Darth Vader Wood Burner Remix
The main problem with an anvil like this is that the face isn't hardened so it will probably get a lot more dings and dents than one that is hundreds of years old that is hardened.
Over Engineered Nutcracker
Giant Steel Skeleton Hand (and coat rack)
Spark plug fighter plane
Saw Knife and Leather Sheath
Porch-Swing Fire Pit
Nice, i look forward to making the crucible tongs
Crucible Tongs & Melting 56kg of Aluminium
Forged Bottle Opener From Bar Clamp
Small Propane Tank Crucible (No Weld)
Clay Crucible Recipes
Welding Gloves That Live Forever
Portable rocket stove about $25
Charcoal Grill Forge: Become a blacksmith on the cheap
Simple Sheet Metal Brake: No Welding
How to Make a Propane Forge
If you are like me and have no wall space in your shop, a way to fix this is to build the harness for the bandsaw but don't put on the angle iron. Figure out some way to make the harness reach below the saw (using square pipe or something) then weld on two pieces of angle iron that will sit flush with the table and you can clamp it down. Ta da! A band saw that is still portable without using precious wall space
Nifty vertical table saw stand for you portable bandsaw that keeps your bandsaw portable!
Tractor Bucket Attachment Point (Let's Lift Heavy Stuff!)
Camp fire skewers for SMORES CONES!
Homemade Bar Clamp - Re-Bar Clamp
3D Printer Part Recycling Grinder
Care to make (and link) an instructable on how you made it?
Bandsaw stand from scrap lumber
You can also use a propane torch to do it with steel this thin but I'm not sure if you will be able to temper it because you already put on the wood handle
If you look at the sparks in the picture where he's cutting the blade out, you can see that they have little bursts at the ends which means it is high carbon steel and can be hardened
Tomahawk Survival Axe (that opens beers!)
Hello Ave's video
Bicycle/Chainsaw Chain Damascus Steel
Propane Tank Aluminium Smelter (No Weld).
Cleaning Rust Off of Tools Without Harsh Chemicals
Mini Wood Lathe
Dowel Center Finder
Low Cost Foundry/forge
The Mini Steel Bucket Foundry.