Offsetting DIY BookshelfView Instructable »
Please visit my website to download the PDF that has the lettering.
Reclaimed Wood Frame SignView Instructable »
Sethsg, thanks for the comment. I use Canon 5D Mark II that I bought about 10 years ago. It's still a very good camera. I also use 50mm f1.2 lens for most of my pictures. I don't do much editing besides adjusting brightness and color temperature. Most important is to have your setting set up correctly on the camera.
How to Make DIY Ottoman PoufView Instructable »
Hi Brad, I attached the fork and the spoon with a fishing line. I drilled a small hole between the boards and feed the line to the back and tied it in the back. You cant see the fishing line from far away or in the photo.
DIY Wood Candle Holder
Wooden Kitchen Sign
Bench With StorageView Instructable »
Triangle Peg GameView Instructable »
DIY Kitchen Table With Stone Coat EpoxyView Instructable »
Kids Growth RulerView Instructable »
How to Make a DIY Bar StoolView Instructable »
Yes it does, thanks.
DIY Night Light Treasure ChestView Instructable »
DIY Cornhole Boards, Bags and ScoreboardView Instructable »
DIY Pencil BoxView Instructable »
Costco is a Big Box store. The OD would very maybe 1/2" is diameter, and since TP is soft, most of the brands should fit.
Thats a good idea, thanks for sharing.
Table CenterpieceView Instructable »
Its Kirkland Signature Bath Tissue, we buy it at Costco. But most of the TP are about the same size.
Thankyou. It’s a simple project, just takes some time to cut all those pieces out. Ifyou have a band saw or a jig saw, I’m sure you could do it.
Cloud Toilet Paper StorageView Instructable »
I used Butyl tape for metal roofing in the corners. I'm sure there are better ways to seal the corners. I'm sure landscape fabric will work.
Greatquestion! I have few reasons why I built it. I enjoyed building DIYprojects. The cost to purchase onepanel from Home Depot is around $100. It cost me about $30 to make one panel. Soif someone wants to save money and enjoys building, this could be a greatoutdoor project. The links I provide forsupplies and material are Amazon affiliated links. I get paid a percentage ifsomeone clicks on that link and buys an item. I also have these affiliated linkson my blog www.thediyplan.com with other projects that I have done. So in the long run, I get rewarded for creatingthese plans/instructions.
Thereis a 4x4 post in the middle and 2x8s on both sides on the post. I took one ofthe 2x8 out. Placed the fence in and then put the 2x8 back. The fence is notattached to the post, it’s standing on the concrete jammed between the 2x8s. If there was no concrete, then I would probablyattach it to the post using half cut 3” end caps.
PVC FenceView Instructable »
Backyard PlaygroundView Instructable »
DIY Planter BoxView Instructable »
How to Build a Dining Table