Tell us about yourself!
Easy Recycled Crafts : How to Make Ice Cream Sticks Handmade Jewellery Box
Hexagonal Cardboard Gift, Jewellery or Chocolate Box
Pencil Box / Storage, Jewellery, Keys, or Money Box
Welcome to Arduino
3D Printing Class
Hey, I am not a electronics person; but planning to make one of these. Help.Where do we add those capacitor ?connecting -ve and +ve power input of bluetooth?orone in each line of -ve and +ve supply ?
Charger module for lithium batteries (1S) come at 1Amps rate only. Anything beyond that will need battery protection. So does not matter if you use 1Amps or 2Amps charger; the battery will charge at a maximum of 1Amps/hour rate only.Coming to Lithium battery; the maH in battery denotes the capacity. So technically a 2400maH battery which is nothing but 2.4Amps*Hour; will charge in around 2.5 to 3 Hours if you are using a power source 1Amps or higher. If you are using a old mobile charger; which come with 700ma or 800ma rating, then the charging time will increase.
If you are using lithium ion battery charger module; yes you still can.As the charger module gives output at 1000mah, using a 2Amps charger would give same charging speed as using a 1Amp charger.So it would take around 8/9 hours for a full charge a 6000mah battery. And if you are using a lower rating charger (700mah or 800mah) then the charging time will increase.Do not try to bypass the charger module; unless you got some better rated charger module in mind.
DIY Bluetooth Speaker
DIY 2k(2560x1440) LED beam projector
Adjustable Voltage Step-up (0.7-5.5V to 2.7-5.5V)
DC Boost Converter