Tell us about yourself!

Complete Your Profile
  • filou63430 commented on dhepguler's instructable DIY Filament Extruder1 year ago
    DIY Filament Extruder

    hello or is connect resistance thank you in advance

    Hello please where is connect thé 100ohm thanks

    View Instructable »
  • filou63430 followed Aditya_km_1 year ago
  • filou63430 commented on CesNieto's instructable DIY Vacuum Robot 1 year ago
    DIY Vacuum Robot

    https://youtu.be/BeNVHW-ly4k

    https://youtu.be/-r5Zucc35mY

    https://youtu.be/h_QPO4D5dFw

    View Instructable »
  • filou63430 commented on CesNieto's instructable DIY Vacuum Robot 1 year ago
    DIY Vacuum Robot

    https://www.thingiverse.com/thing:2519029more picturses and stl

    View Instructable »
  • filou63430 followed RemiM121 year ago
  • filou63430 commented on CesNieto's instructable DIY Vacuum Robot 1 year ago
    DIY Vacuum Robot

    for activated 2 bumpers------------------------------------------// Variables will change:int bumperState = 0; // variable for reading the pushbutton statusboolean control = true;int counter = 0; // Prevents from being stuckint bumperState2 = 0; // variable for reading the pushbutton statusboolean control2 = true;int counter2 = 0; // Prevents from being stuck------------------------------------------------------// initialize the pushbutton inputs //Bumper pinMode(bumper1, INPUT_PULLUP); pinMode(bumper2, INPUT_PULLUP);--------------------------------------------------------/////////////////////////////////////////////////MAIN CODE//////////////////////////////void loop(){ /* Serial.print("SD1= "); Serial.print(sdSHARP(SD1)); Serial.println(); Serial.print(&quo...

    see more »

    for activated 2 bumpers------------------------------------------// Variables will change:int bumperState = 0; // variable for reading the pushbutton statusboolean control = true;int counter = 0; // Prevents from being stuckint bumperState2 = 0; // variable for reading the pushbutton statusboolean control2 = true;int counter2 = 0; // Prevents from being stuck------------------------------------------------------// initialize the pushbutton inputs //Bumper pinMode(bumper1, INPUT_PULLUP); pinMode(bumper2, INPUT_PULLUP);--------------------------------------------------------/////////////////////////////////////////////////MAIN CODE//////////////////////////////void loop(){ /* Serial.print("SD1= "); Serial.print(sdSHARP(SD1)); Serial.println(); Serial.print(" SD2= "); Serial.print(sdSHARP(SD2)); Serial.println(); delay(200);*/ bumperState = digitalRead(bumper1); bumperState2 = digitalRead(bumper2);---------------------------------------------- else if (bumperState==0){//BUMPER1 counter = 0; backwardMotors(1500); //backward delay of 500ms leftMotors(400); Serial.print(" Turn Left "); } else if (bumperState2==0){//BUMPER2 counter2 = 0; backwardMotors(1500); //backward delay of 500ms rightMotors(400); Serial.print(" Turn Right "); }

    View Instructable »
  • filou63430 commented on CesNieto's instructable DIY Vacuum Robot 1 year ago
    DIY Vacuum Robot

    Thank you Stefanied I will try this as soon as I will be thank you very well you also install an ir under the correct vacuum is Cool

    View Instructable »
  • filou63430 commented on CesNieto's instructable DIY Vacuum Robot 1 year ago
    DIY Vacuum Robot

    Hello nice work stefanied for the moment I think buy ir SHARP I still have the same problem it would be more judicious to use 2 ultrasonic sensor like that more ir and bumper

    For the suction actually it will require seals and under the suction motor a ventury system like on the dayson the brushes also I am not available for the moment but I would have wanted the 2bumper active also if you can send me the code I can not do it thank you

    View Instructable »
  • filou63430 commented on CesNieto's instructable DIY Vacuum Robot 1 year ago
    DIY Vacuum Robot

    I have test the test-motor it's OK it's moving forward. I put old version beta v2.0.1 and I tregged two ir it's stop rear and front and moving forward if I do bumper it turned left normally on the arduino code???? I thinks the problem it's ir code not compatible or ir problems

    View Instructable »
  • filou63430 commented on CesNieto's instructable DIY Vacuum Robot 1 year ago
    DIY Vacuum Robot

    Thank's friand for tour hein i test this this weekend Thank's a lot

    View Instructable »
  • filou63430 commented on CesNieto's instructable DIY Vacuum Robot 1 year ago
    DIY Vacuum Robot

    There are stl and solidworks filesmy video with the problem

    https://www.thingiverse.com/thing:2519029

    View Instructable »
  • filou63430 made the instructable DIY Vacuum Robot 1 year ago
    DIY Vacuum Robot

    the stl top vaccum

    View Instructable »
  • filou63430 commented on CesNieto's instructable DIY Vacuum Robot 1 year ago
    DIY Vacuum Robot

    the on off bouton it s a litle more long than you

    View Instructable »
  • filou63430 made the instructable DIY Vacuum Robot 1 year ago
    DIY Vacuum Robot

    Hello j ak always the problem walk before back even with the sensors ir and the bumpers debranches I publish the video to see the problem thank you

    View Instructable »
  • filou63430 made the instructable DIY Vacuum Robot 1 year ago
  • filou63430 commented on CesNieto's instructable DIY Vacuum Robot 1 year ago
    DIY Vacuum Robot

    Hello I have problems with my uno hsj is using a mega 2650 of my printer i think i have lost the bootloader. I dont Does not include the calculation of 4.9mv per volte I have a battery of 12.45 v and the minimum voltage 4 has 5 v? I use ir detector and not the sharp I do not know if the program will work with as on the sharpe? I also have a wheel that turns by accoup and the other that makes walking forward reverse? I have already reverified the wiring for the battery when charging j uses a led with a 1n 4007 to avoid the reyour of the battery it lights up just when the charger is plugged. J also uses two small motors to be able to install brushes in the front of the vacuum cleaner. B will need a little help I am novice for programming thanks in advance

    View Instructable »
  • filou63430 made the instructable DIY Vacuum Robot 1 year ago
  • filou63430 commented on CesNieto's instructable DIY Vacuum Robot 1 year ago
    DIY Vacuum Robot

    Thank you for the very fast answer for the moment j impression(printing) of the bottom of l has problem with my printer this morning l vacuum cleaner c is stopped has half for the riders yellow rectangle they must all be ready correct for l food(supply) j always have the problem d food(supply) of l arduino that I can I shall post photos thanks a lot

    View Instructable »
  • filou63430 commented on CesNieto's instructable DIY Vacuum Robot 1 year ago
    DIY Vacuum Robot

    bonjour très beau projet je suis en train de le construire avec quelque amélioration je posterai des photos quand tout sera fini mais j ai un problème avec l alimentation du arduino je me demande si le schéma est bon j ai l' impression que l' alimentation addition n est pas présente si je connecte tout la partie électronique en USB à mon pc cela fonctionne .j utilise une batterie nimh 12.45v 4500mah cela permet d avoir 45 minutes d autonomie .merci vraiment pour le probet

    View Instructable »