fs woodworking

Please check the last step. You will find a link to a pdf. The very well made plans are in there. Different dimensions though but you can scale them up or down.If you have any more questions please let me know. I will redraw the plans if needed

Thanks a lot my friend. The first time I saw it I thought exactly the same. Once you mark the oieces precisely then it is quite easy.

Thanks a lot.

Thank you!

LOL, yeap it fits in any room

Hi you can also use your drill press as a lathe. vertical though but it works.

Yes that is a great idea. Thank you.

I unfortunately do not speak Spanish but I understand you say about the gear required. You do not need lots of tools to build it. A table saw and a pocket hole jig are enough. As for the staples you could use a few 25mm nails.

I would say around 6 or 7 kg.

Thanks

Thank you sir.

Thank you. I am glad I was able to help

Thank you very much.

Thank you!!

You are very welcome. Looking forward to seeing your new projects.

This is really cool Elias. Nice job. The dimmer is a must.

Wow! Thank you for all this info you provide. Like I wrote this cutting board was the first one I have ever made. My next ones will be better thanks to your pieces of advice.

Like I wrote this cutting board was more of an experiment for me. There are many people here who could give the best answer. I made a putty from titebond iii and very fine saw dust from the wood I made the board from. I filled some small gaps with it.

Start making one today. It is not that difficult.

I made a putty from titebond iii and very fine saw dust from the wood I made the board from. I filled the gaps with it. Although I suppose there should be a better way.

Hi, it took me 3 afternoons for this. Mostly because I had to wait for the glue to set.

Hi! thank you for your comment. I think that anything above 3mm would be ok. About my jig, a few people asked me about it so yes I will make a video and an instructable about it.

Ha! yes I know the clamping process was not the ideal for the job. But anyway I am lucky it worked out well.

Thats a good idea! Thank you

Thank you!

Thank you very much.

You mean not to make a wooden body but instead use a socket?

Γεια σου φίλε Κώστα. PDF εχω φτιάξει για προηγούμενα instructables που εχω ανεβάσει εδω. Αυτη τη κατασκευή δε τη σχεδίασα εξαρχής αλλα δούλεψα οπως μου έβγαινε. Γι&al...

Γεια σου φίλε Κώστα. PDF εχω φτιάξει για προηγούμενα instructables που εχω ανεβάσει εδω. Αυτη τη κατασκευή δε τη σχεδίασα εξαρχής αλλα δούλεψα οπως μου έβγαινε. Γιαυτο δεν εχω σχέδια. Στο επόμενο... Σε ευχαριστώ για το σχόλιό σου.

Great idea.

Hi, if you want to make something like that for a class I would suggest you not to use the band saw the way I use it. You can make a jig with clamps like a crosscut sled and with your fence you can cut all pieces cleanly and more safely. Have a good day and I am here if you have any more questions.

Thank you.!!!