I did write you an answer ... did you get it? Its even shwon on my profile.
You can load a Video file over the Website but no analog or digital video input...
Yes I did this with my original design. But I did not want smt components because a lot of people are not able to solder them .... But looking back this is not for everyone to build because it's to complex anyway :-( ai tried my best to simplify it ...Have fun ;-)
It will hopefully be soon listed ... Waiting for review.
No this is my old build. And no you can not. We would need an other position sensor to make manually control possible.
The most outer led needs to be updated 10000 times a second. If we would side the full strip it would need to be clocked with 10MHz and that would not be very reliable ....
One POV Display to Rule The...View Instructable »
1- just used the space under the esp32 ;-)2- ok banggood is not so strict about changes to there parts ....3- you should be good as long there is no other damage 4- ok just try . A wrong wiering should not damage anything ;-)5- yes this can be hard. But it will save you time otherwise there will be too many combinations to try ...The 5 Volt calibration worked?
Thanks! And yes 5 is minimum but they are still cheaper than everyone else .... If you need it quicker use oshpark ;-)
Mosfet Qith Arduino IRFZ44N IRLZ44N IRF530N
Don't search ... Just find it ;-)
TIM [Tag Based Inventory Management System]
TIM [Tag Based Inventory Ma...View Instructable »
The esp8266 is really popular. The esp32 is it's follow-up. Yes the camera module is fun. But also very buggy ... Don't expect too much.
Etch a Selfie
Etch a SelfieView Instructable »