author
8CommentsJoined January 6th, 2015
Foto, musik, mat, kaniner, Jolt m.m. . Ordningen varierar beroende på tillgång och efterfrågan av valda intressen. Världen behöver mer kaos. Ur kaos kommer ordning. Vad världen har nu är enbart oreda.
  • johan.j.edman commented on Luq1308's instructable Peltier-based Smartphone Cooler7 months ago
    Peltier-based Smartphone Cooler

    This link might be useful for you.(With some slight modification to the design) Modify it with a bigger heatsink, remove some parts of the fins on the heatsink so the peltier can be attached on the same side as the fins. The fan will cool down one side of the peltier with the airflow and also remove heat from the larger heatsink.Works on the same principle as a "powerless" stove fan.The cooler will become a bit more mobile without the external powersource. https://www.instructables.com/id/Portable-Airflow-...

    The heatsink could probably cool the phone enough by it self. A modification of this design would require no external power and cool your phone. (More mobility.)https://www.instructables.com/id/Portable-Airflow-...

    View Instructable »
  • How to Distill Water in the Kitchen

    They are used in cooling boxes that you plug into your car's cigarette lighter (12v socket), Mini usb fridges and so on. They are also used in heat powered fans for wooden stoves and so on. (When one side is warmer than the other it starts to produce electricity.)Google Thermoelectric cooler (TEC) or Thermoelectric generator (TEG) for a lot information.

    There is 1 tiny hole on each lid so it is wented.https://cdn.instructables.com/FLC/LOJF/JLCKIZ9Z/FLCLOJFJLCKIZ9Z.LARGE.jpg

    With a big enough heatsink it should be possible. Something like this could probably be used. (worked very well in my gaming computer a while back.)https://www.quietpc.com/ac-acc-s1rev2

    With a big enough heatsink it should be possible.Something like this could probably be used. (worked very well in my gaming computer a while back.)https://www.quietpc.com/ac-acc-s1rev2

    View Instructable »
  • USB FOAM CUTTER - USB STYROFOAM CUTTER

    I Think that the charger has one 2.1 Amp and 1 amp connections. So a total output of 3.1 Amps.(I could be wrong but most of the chargers I've had with 2 outputs have been that way)

    View Instructable »
  • johan.j.edman commented on GiorgiQ's instructable Drill Perpendicular1 year ago
    Drill Perpendicular

    This is really great work. Simple design but highly modifiable.

    View Instructable »
  • johan.j.edman commented on billcitrus's instructable How to Make a Steampunk Mask 2 years ago
    How to Make a Steampunk Mask

    Cyberpunk is way more futuristic. https://encrypted-tbn2.gstatic.com/images?q=tbn:AN...While steampunk is late 1800's http://morriscountynj.gov/wp-content/uploads/2016/03/steampunk-51760-lg.jpg

    View Instructable »