Tell us about yourself!
Hi Ethan, this is looking very impressive!! I am very sorry to hear that its not working for you.have you made sure to double checked your parameters on the flight control board? It might pay to do a factory reset and reenter the parameters.Also if it is cutting out during flight it could be an issue with your controller not having the range?Also make sure you have secured that flight control board securally to the frame of the quad? I cannot emphasize this enough, those flight control boards are pretty fussy and the smallest amount of vibration sends those puppies into spasms.I hope this information can help you, let me know if it doesn't and I'll have another think about it and maybe come up with a few more ideas.Also I'd be keen to know if you get it it going.Good luck!
Drop Point Pocket Knife
Ginja Ninja Slice
The props most used with these motors are "prop 1045's"I found some links that might be helpful Amazon-https://www.amazon.com/4pcs-Propeller-Props-Flamewheel-Flight/dp/B01DOSIGAA/ref=sr_1_2?dchild=1&keywords=prop+1045&qid=1587595893&sr=8-2Aliexpress-https://www.aliexpress.com/item/32843402502.html?spm=a2g0o.productlist.0.0.35497922aEv67D&algo_pvid=74db684a-4691-4b56-abd3-ab911fd1103d&algo_expid=74db684a-4691-4b56-abd3-ab911fd1103d-0&btsid=0be3769015875959824966772ee3f0&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
Yes that one would work just fine 👍
Thanks for the encouragement!
thanks for the encouragement!
Hi, I worked out that it would cost you $266.75 NZD, including shipping. If you already have a battery, charger and transmitter it would only cost you about 100 NZD, including shipping, for the motors, ESCs and flight controller.I didn't include the price of the glues/tools because I had them already, and the cardboard was recycled :)
All good 👍If you every have other questions don't hesitate to ask.
I did a quick search on the internet and found this transmitter on amazon for 60 NZD not including shipping https://www.amazon.com/Flysky-Transmitter-Controller-Helicopter-Quadcopter/dp/B07CWC3VCW/ref=sr_1_7?dchild=1&keywords=rc%2Bradio%2Btransmitter&qid=1587508671&sr=8-7&th=1
Cardboard Quadcopter View Instructable »
Paper Mache Tank
Sorry I just sore that the PDFs are not working I will try to get them working fore youCheers
Hi, you should be able to find the PDF above Step 3 or if it's not there it's at the start of the instructable Cheers
Jigsaw Blade Knife
Hi thanks for notifying me about the faulty link, I've updated the link on site :)here is a replacement link https://urlzs.com/g1nPR
Homemade Quadcopter View Instructable »