Tell us about yourself!
Also, if you're using the UNO, you should, and I needed to, have a 1uF or 10uF capacitor between the ground and the reset pin, and mind the polarity of the capacitor. Once I did that, I was able to program.
I made all four projects. This is a superb box, from soldering, construction and just fun.
Check out Hackerbox 0024. That may inspire you. :)
I thought I had that. I will double check. Thanks.
Hi there!So I get the following errors after compiling and rebooting the camera mode. I am sure I have done something silly.[E][camera.c:1049] camera_probe(): Detected camera not supported.[E][camera.c:1249] esp_camera_init(): Camera probe failed with error 0x20004Any ideas as to what it may be? ThanksKen
I am working on it. If I get one designed in June, I will post it. I am envisioning something to snap over the front to protect the components there while leaving the side open to access the pins and swithch. The back will be open as well.
Hey Hackerbox, Do you have an engineering diagram that I can use to create a 3d printed box for it?Thanks.Kenny
Thanks. I will give that a go.
This was a good kit and easy to construct. I have another that I have made from Hackerboxes about WiFi, but this one is very portable and better. I like it.
I had that issue. I realized I forgot to solder the resister. Don't forget the resister.
Took less than a half hour to put the components onto the Atari board. Pretty cool sounds. I can annoy my co-workers now. :-)
Custom Hexagon Shelves Using 3D Printing
Biochemists Way of Baking Bread - Snuggle Up to Yeast
How to Make Chocolate Eclairs
Super cool spinner.
Thanks for the code. All seems to work great!
I got this to run, but I didn't get the oled to display any wifi info. I will work on that.
The Tower Box (Dice Case)
Tools and Materials for Easy 3D Printing
Using a Slicer
Easy 3D Printing
3D Printing Class
One of the frustrating things is that I can't seem to add the board using Arduino 1.6.9. :( I am working on this though.
Edison and Arduino/Genuino 101 wireless weather station